Part # 5110-20
Manufacturer Code SPX0125F
Dimensions 1.75" L x 1.75" W x 0.1" D
Alternate Part #'s 05059A318, 35B1116, G71, HAY1011961, SP0125F, SP125F, SPX125F
This is a water slinger gasket which attaches to the pump motor shaft on 48Y and 56Y frame square flange and 56J frame threaded motors. Used on the Hayward Max-Flo, Super Pump, and Super II pumps, the Pentair / Purex Quietflo, Aquatron, and A & AH pumps, the Waterace RSP series, and others. See complete list of pumps under "Parts" tab above.
Outside diameter: 1-11/16"
Inside diameter: 9/16"
The diameter for this slinger is stated to be 1-11/16". The one I have for my SP2605X7 is approx. 1-5/16". The motor is a UCT1072. Why the difference?
Hi. Different manufacturer has different water slingers, some generic and some OEM.
A new century 2 HP 56J threaded shaft motor has what looks to be a slinger washer already on the shaft. Do I need to replace it with the g-71-2 or add it or just use the one on the shaft? Anxiously awaiting your response.
Tony, You can keep the existing slinger that comes with the motor.
Is the "slinger" #12 in the super II parts diagram, (part no 5110-20 mfg # SPX0125) on all models?
The water slinger is the same on all of the Super II pumps 5110-20 is the correct water slinger.
(4 out of 5 stars) Tough slinger to find
Reviewed By: ()
This simple little rubber washer was the hardest piece of my pump rebuild to track down. I could not find it myself but the Inyo Pool staff identified the correct part with no trouble. The older version had split and come off the motor shaft.