Part # 4700-0
Manufacturer Code SP0710XALL
Alternate Part #'s HAY06219, SP0710XALL, SP710XALL
THIS IS THE HAYWARD UNIVERSAL ALL PORTS SIDE ..MOUNT REPLACEMENT VALVE USED TO REPLACE A WIDE VARIETY OF 1-1/2" SIDE .. MOUNT VALVES HAYWARD# IS SP-710X-ALL VALVE COLOR IS WHITE ROUND COVER, ATTACHED WITH 6 NUTS & BOLTS "MODEL SP 710XALL" ON COVER "SP710XA-40" ON VALVE BODY ..... DIMENSIONS FRONT TO BACK IS 6-3/4" (EXCLUDING SIGHT GLASS) HEIGHT IS 6-3/8" PORTS ARE 1-1/2" MPT (ABOUT 1-7/8" INSIDE DIAMETER ..... USED ON & REPLACES WIDE VARIETY OF 1-1/2" SIDE MOUNT VALVES ..... VALVE POSITIONS (CLOCKWISE FROM TOP) STARTING ABOVE THE WASTE PORT WASTE, CLOSED, BACKWASH, RECIRC., RINSE, FILTER ..... PORT ARRANGEMENT (CLOCKWISE FROM TOP) 1ST SIDE - WASTE PORT WITH SIGHT GLASS
ALTERNATE OPTION: Hayward Universal 2" Valve - SP0715ALL.
what will replace a Hayward Vari-Flow-Valve model #SP711?
Timothy, There are a few different valves that will replace it. In order to recommend the correct one, we will need to know which model filter tank you have.
I have a s200 sand filter. The handle is stuck. I took it apart and there is sand that I cannot dislodge. The part off of the top of the variflo is SP-710X-B. I cannot find the exact part number on your site. Can you help?
I have a 300 lb sand filter Hayward 1 1/2 inch ports my valve is starting to fail but it’s old and I can not read the part numbers. Will this valve work.
Is your filter a side-mount or top mount valve style? Also, do you know how old your filter may be?
My six way valve says SP 710, rated press 50 psi, 75 gpm. It is connected to a Hayward S-240 filter. Which one do I need to replace it: SP710 X 32 or SP710 X 62 ?
I have a Haywood Micro Clean DE Filter. The handle on the valve (SP-710FL) broke...Valve # 715XR50-2 Multiport....can I purchase just the handle?
We have a Hayward vari flo valve No. SP0710XEALL with the serial no.21120801006748026. We need to replace the top. Do you sell these or the whole replacement? Regards Bill.
Does 4700-0 come complete with gaskets, threaded fittings for inside the filter?
The 4700-0 is a complete valve (gaskets installed inside). It does not come with any fittings since it can fit several different filters.
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
(5 out of 5 stars) The Right Part When I Needed It
Reviewed By: Donte Boote from Gulfport, MS ()
Pros: Easy Shopping And Fast Shipping
I have ordered from other online pool companies and decided to use INYOPOOLS.com. I was blown away with the service, shipping and getting the right part at the right time.
(5 out of 5 stars) Perfect replacement...
Reviewed By: Brother Rain from Port St Lucie, FL ()
Pros: Like for like replacement.
I had a Hayward Vari-Flo multiport valve go bad after 20 years. I was going to just replace the gaskets and o-rings but decided, it's old, time for a new one. The local pool store had just the handle and top for $89. For a few dollars more I got the entire valve assembly with all the gaskets and o-rings. Once I received the valve, I opened the old one and found I made the right decision, the stabilizing fins that hold the spider gasket in place were broken off. I'd have had to replace the body anyway...Smooth operation, no leaking, real easy to swap out. Fast shipping. Perfect.
(5 out of 5 stars) I ordered wrong part
Reviewed By: Kenneth S. from Orange Park , FL ()
I purchased this part for my old DE filter, It was necessary to buy a new DE filter and the new one needed a different valve, I returned this valve and got a new one. Returning this was easy, I had super cooperation, and my check in about 2 weeks: Two Thumbs Up!!!!