Part # 5074-101
Manufacturer Code 350015
Dimensions 12" L x 10" W x 12" D
Alternate Part #'s 350015
VOLUTE PUMP/POT ALMOND
Is this the replacement for WF-28 ? I seen some one ask about a WF-28 c.
Hi, Stan. This Volute can be used with the WF-28 model pump. The model will the suffix C is the old style which has the Clamp Assembly - 070711 strainer which is not compatible with this housing which uses the Lock Ring Clamp - 357199.
Is the pump housing 073131 a replaceable unit which is complete with gaskets, impeller, seals? Is there a rebuild kit for this pump housing to replace the impeller? This Intelleflo 4-160 VF was installed in 2006.
Hi, Gary. There is not a kit that includes the housing along with the impeller.
Is this the correct replacement for P/N 011514 PMP WFE-6 20/-230V 1.5HP DATE 06/30/2010
Also, is there a kit to replace necessary gaskets,etc.
Ineed to replace pentair whisperflo volute part number 011773, would you please advise if partnumber 011774 is suitable.
Thank you Paul Robinson
Does this part require a gasket?
Tom - Yes, this volute has a gasket between the volute and the seal plate. It will be one of two options depending on the year and make of the pump. See the parts lists for the Pentair pumps using this volute under "Volute, Wfe (almond) (after 11/98) (350015)" For example if you have a Whisperflow Pump you will need #9 Gasket Seal Plate. That's the main gasket. You may also need an impeller O-ring, an difusser O-ring and an motor shaft Seal.