$14.49

Qty:

Details

Top

Part # 4744-022

Manufacturer Code 805-0460B

Dimensions 16" L x 16" W x 1/4" D

Alternate Part #'s 805-0460, 8050460, O-542, 14-270-1069, WW8050460B, WWP-051-0460

Product Description

INYO # 4744-022 WATERWAY #805-0460 THIS IS THE CLEARWATER II FILTER BODY O-RING OUTSIDE DIAMETER: 16-1/4" INSIDE DIAMETER: 15-3/4" THICKNESS: 1/4"

Top

?     Asked on 4/5/2015by Joe

will this O ring fit my proline model FD18 serial number CW2D-004275 DE filter housing? Large O ring.
 Reply

A  Answered on 4/7/2015 by InyoPools Product Specialist Andy O.

Joe, Part number 4744-022 would be the correct o-ring for the Waterway Clearwater II filter.
 Reply


?     Asked on 5/15/2016by Dave

Is this the o-ring for Clear Water II, serial # CW2-64013?
 Reply

A  Answered on 5/17/2016 by InyoPools Product Specialist Andy O.

Good Morning,Thank you for contacting Inyo Pool Products. Unfortunately, we can not look anything up by the serial number but I can tell you that this o-ring will fit both the Clearwater II DE and Cartridge filters,
 Reply


?     Asked on 6/13/2020by don

will this o-ring fit my proline pe71. thanks, don
 Reply

A  Answered on 11/23/2020 by InyoPools Product Specialist Hector F.

Hi Don, this o ring is not listed for the Proline PE71 series pool pump however please see the parts diagram for that series pump where all seals and gaskets are listed. 
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

O- ring was causing my filter to leak water

Written on 6/9/2022 by Guest

Removed my pool filter lid .
First I made sure that the new o -ring fit.
Then I lube the new o- ring.restalled the filter lid fill the filter with water.Turn the pool filter back on and no more leak

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Old o-ring had split

Written on 7/23/2020 by Guest

Removed old o-ring by sliding a flat tip screwdriver behind it and pulled out all the way around. Put a little lubricant on the new o-ring. Put o-ring into groove and worked it around until all of it was set back in place.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.88  out of 5 stars)
8 Rating
5 star:
 
(7)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews