$606.99
By AquaStar Pool Products
Part # 3816-403
Manufacturer Code WAV18103
Alternate Part #'s WAV18103
Availability This Main Drain Has Been Recalled and is No Longer Available
************************************************
GENERAL DESCRIPTION: 18" X 18" SQUARE FRAME AND COVERS, LIGHT GRAY************************************************
BASIC SPECS: THIS IS AN 18" X 18" FRAME WITH 2 BRACES THAT CROSS IN THE MIDDLE. THIS DIVIDES THE FRAME INTO 4 SEPERATE SECTIONS AND EACH SECTION HAS A 9" X 9" COVER SCREW HOLES: 1 IN THE CENTER OF EACH SIDE ON EACH OF THE 4 COVERS USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 775 GPM @ 1.4 FPS WALL: 775 GPM @ 1.4 FPS LIFE: 5 YEARS TOTAL OPENING: 176.8 SQ INCH 828 GPM @ 1.5 FPS************************************************
DETAILED DESCRIPTION: THIS IS AN 18" X 18" SQUARE FRAME, COVERS AND SCREWS THIS IS AN ANTI-ENTRAPMENT FRAME, COVERS, AND SCREWS THE FRAME ITSELF HAS A BRACE RUNNING FROM EACH SIDE TO THE OTHER SIDE WHICH CROSSES AT THE CENTER OF THE FRAME. THERE ARE 4 SEPERATE COVERS WHICH ATTACH TO THE FRAME AND BASICALLY DIVIDE IT INTO 4 SEPERATE 9" X 9" SECTIONS. A WAV 9" X 9" COVER ATTACHES TO EACH OF THE 4 SECTIONS. EACH COVER IS ATTACHED WITH 4 SCREWS, 1 THE CENTER OF EACH SIDE. MATERIAL: PLASTIC FRAME, AND COVERS STAINLESS STEEL SCREWS COLOR: LIGHT GRAY SHAPE: SQUARE************************************************
FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 2-9/16" (B) FRAME ONLY HEIGHT: 1-5/8" FRAME LENGTH & WIDTH AT PLASTER LINE: 18-11/16" (A) FRAME MAXIMUM LENGTH & WIDTH AT BOTTOM: 19-7/8"************************************************
COVER DIMENSIONS: COVER OUTSIDE LENGTH & WIDTH: 8-7/8" COVER ONLY HEIGHT: 1-11/16" COVER EXTENDS 15/16" MAXIMUM ABOVE THE FRAME WHEN INSTALLED THE COVER IS 3/4" TALL AT THE EDGE. SPECIAL NOTE: THE WAV 9 X 9" COVERS ARE USED IN THIS FRAME AND COVER. THE RWAV 9 X 9 RETROFIT COVER IS TALLER AND HAS EXTRA HOLES. THE RWAV IS SOLD AS A REPLACEMENT COVER ONLY.************************************************
SCREW HOLES: (THIS IS FOR EACH OF THE 4 SEPERATE COVERS) TOTAL SCREW HOLES: 4 THERE IS A SCREW HOLE IN THE CENTER OF EACH SIDE THE CENTER OF THE SCREW HOLE IS 5/16" FROM THE EDGE FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 8-1/4". THERE IS A 3/8" TALL X 5/8" LONG NOTCH JUST BELOW THE SCREW HOLE IN EACH SIDE. THIS NOTCH MATCHES THE CORRESPONDING TAB ON THE FRAME************************************************
SCREWS: (THIS IS FOR EACH OF THE 4 COVERS) 4 SCREWS - #10 X 3/4" LONG SS, SELF TAPPING PHILLIPS HEAD THESE ATTACH THE COVER TO THE FRAME************************************************
MARKINGS: WAV9-XXX IS MOLDED INTO THE TOP OF EACH COVER IN THE CIRCULAR CENTER PIECE THE FRAME HAS NO MARKINGS THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON THE COVER
