By Afras
Part # 3803-060
Manufacturer Code 10064ACVGB
Alternate Part #'s 10064ACVGB, 10064ACW, 55-149-1006
************************************************
GENERAL DESCRIPTION: 12"X 12" SQUARE RETROFIT MAIN DRAIN COVER, WHITE************************************************
BASIC SPECS: 2 OF THE SIDES HAVE 1 HOLE IN THE CENTER 2 OF THE SIDES HAVE 5 HOLES WITH 1 IN THE CENTER SEE BELOW FOR DETAILS USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 188 GPM WALL: 160 GPM LIFE: 6 YEARS************************************************
DETAILED DESCRIPTION: THIS IS A 12" X 12" SQUARE REPLACEMENT COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS HAS SCREW HOLES DESIGNED TO LET IT REPLACE A WATERWAY, HAYWARD OR PENTAIR 12" X 12" SQUARE COVER THIS IS A MODEL 10064ACVGB, 11" ROUND COVER ATTACHED TO A SQUARE ADAPTOR PLATE EACH SIDE OF THE SQUARE PLATE HAS A SQUARE NOTCH AT THE BOTTOM MATERIAL: PLASTIC COVER, STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: SQUARE************************************************
COVER DIMENSIONS: COVER LENGTH & WIDTH: 11-11/16" (A) HEIGHT: 1-1/16" (AT THE OUTSIDE EDGE) MAXIMUM HEIGHT: 1-7/8" (AT THE CENTER OF THE COVER) (B) MAXIMUM HEIGHT ABOVE PLASTER LINE: 13/16" FOR A 1-1/16" DEEP FRAME THIS WILL DEPEND ON THE DEPTH OF THE FRAME (THE SIDE OF THE COVER IS FLUSH WITH A 1-1/16" DEEP FRAME AT THE EDGE) THE CENTER OF THE COVER IS 13/16" TALLER THAN THE EDGE************************************************
SCREW HOLES: IN ADDITION TO THE SCREW HOLES AT THE EDGES OF THE ADAPTOR, THERE ARE 2 SCREWS USED TO ATTACHED THE ROUND CENTER COVER TO THE SQUARE ADAPTOR. THERE ARE 4 SMALL SCREW HOLES IN THE SQUARE ADAPTOR. ANY 2 OPPOSITE HOLES ARE USED TO MOUNT THE ROUND COVER TO THE ADAPTOR THE COVER HAS SCREWS PLACED SO THE COVER WILL MATCH THE OLDER STANDARD WATERWAY, AND THE PENTAIR AND HAYWARD OLDER AND CURRENT FRAMES THERE IS ALSO AN 5/8" DEEP NOTCH, 1/2" WIDE IN THE CENTER OF EACH SIDE SCREW HOLE PLACEMENT: TOTAL SCREW HOLES - 16 4 OF THESE ARE SMALL HOLES USED TO ATTACH THE COVER THERE ARE 2 SIDES WITH A SINGLE SCREW HOLE THERE ARE 2 SIDES WITH 5 SCREW HOLES FOR THE 2 SIDES WITH 5 HOLES THE DISTANCE FROM EACH HOLE CENTERLINE TO THE EDGE IS 5/16" FROM EACH SCREW HOLE TO THE OPPOSITE HOLE IS 11-1/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) FOR THE 2 SIDES WITH 1 HOLE THE DISTANCE FROM EACH HOLE CENTERLINE TO THE EDGE IS 5/16" FROM EACH SCREW HOLE TO THE OPPOSITE HOLE IS 11-1/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) THERE IS ONE SCREW HOLE IN THE CENTER OF EACH SIDE ON THE SIDES WITH 5 HOLES THE HOLES NEXT TO THE CENTER ARE 1-7/16" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE) THE OUTSIDE HOLES ARE 4-5/16" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE)************************************************
SCREWS: (6) #8 X 3/4" LONG SELF TAPPING 2 OF THESE ARE USED TO MOUNT THE ROUND COVER TO THE SQUARE ADAPTOR************************************************
MARKINGS: MODEL ABF 64A (10064A) IS MOLDED INTO THE CIRCULAR CENTER COVER THERE ARE NO MARKINGS ON THE SQUARE ADAPTOR THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER
