Drive Belt, Tan, Small 2PK - 3302

$18.99

IN STOCK

Part # 3302

By Aqua Products

  5 Average  

Details

Top

Part # 3302

Dimensions 5.5" L x 5.5" W x 0.3" D

Alternate Part #'s A3302PK

Product Description

Aqua Products AquaBot Small Drive Belt A3302PK

Description:

  •  Tan - Small Drive Belts for Aqua Products AquaBot Swimming Pool Cleaners
  • Genuine AquaBot Part

AquaBot A3302PK
Aqua Products A3302PK

Top

?     Asked on 4/9/2019 by Chris

I know it says (single) but I do need to check that it is $17.99 for one belt, Part# 3302. Thank you, Chris
 Reply

A  Answered on 4/9/2019 by InyoPools Product Specialist Lennox H.

Hi, Chris. This Drive Belt is sold as a set of 2. 
 Reply


?     Asked on 8/28/2018 by

the t2 does it require 2 belts or 4 its not remote controlled
 Reply

A  Answered on 8/28/2018 by InyoPools Product Specialist Lennox H.

Hi. It requires 2 Drive Belts. 
 Reply


?     Asked on 6/6/2018 by John

is this the correct belt for Aquabot Supreme?
 Reply

A  Answered on 6/6/2018 by InyoPools Product Specialist Hector F.

Yes, this is the correct drive belt for your model cleaner and is in stock, ready to ship. 
 Reply


?     Asked on 10/16/2017 by Gene

I need to install part Drive Belt, Tan, Small; (Single) - 3302, Do I need any special tools to install the belt, and what do I do to install the belt?
 Reply

A  Answered on 10/17/2017 by InyoPools Product Specialist Lennox H.

Hi, Gene. A Phillips screwdriver and a needle nose pliers is needed to replace these drive belts. You can refer to our How to Replace an Aquabot Classic Robotic Pool Cleaner Drive Belts for instructions. 
 Reply


?     Asked on 7/15/2017 by Eugene

Have a Millennium XE need the drive belts but do not see the model listed
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Eugene. I was not able to locate a part listing for the Millennium XE so I can't confirm which drive belt is needed. I would recommend contacting Aquabot at 1-800-845-4856.
 Reply


?     Asked on 6/25/2017 by Rhonda

I have an Aquabot Xtreme and I think one of my tan drive belts is missing on one side? Should there be two of them? The machine is not running the floor of the pool quite like it normally does and I think maybe one of the tan belts may have broken?
 Reply

A  Answered on 7/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Rhonda. The Aquabot units require two Drive Belt - 3302.  
 Reply


?     Asked on 6/10/2017 by

I need drive belt for The Pool Butler Which one would fit my vacuum?
 Reply

A  Answered on 6/16/2017 by InyoPools Product Specialist Lennox H.

Hi. This Drive Belt - 3302 will fit the Pool Butler Cleaner.
 Reply


?     Asked on 8/15/2016 by ELIE OHAYON

hi,i have a aquabot turbo industrial z 2 serial # 0816556 ,there is 2 small belts on each side.that look like the item show in this listing. it is the right one? thank you
 Reply

A  Answered on 8/15/2016 by InyoPools Product Specialist Stacey M.

Hello Elie, I have a parts list for Aquabot Turbo T2. If you would like to look at parts click here. Please let me know so I can assist you further with your parts question.
 Reply


?     Asked on 7/28/2016 by Al

I have a aqua bot Junior is there Drive belt that go on both sides of the unit
 Reply

A  Answered on 7/28/2016 by InyoPools Product Specialist Scott W.

Yes the part number 3302 would be the correct drive belts for the aquabot junior.
 Reply


?     Asked on 6/28/2016 by bob hudson

I have an Aquabot Turbo T4RC that apparently needs replacement belts. Which belt??? 3302 unit probably 8 yrs ols
 Reply

A  Answered on 6/28/2016 by InyoPools Product Specialist Lennox H.

Hi Bob, This is the correct drive belt for the Aquabot Turbo T4RC cleaner.
 Reply


?     Asked on 6/26/2016 by bob hudson

I have an Aquabot t4rc that needs new belts. is the 3302 the correct replacement belt
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Lennox H.

Hi Bob, This is the correct drive belt for the AquaBot T4 RC cleaner.
 Reply


?     Asked on 6/25/2016 by geraline crisco

how to replace drive belts
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Lennox H.

Hi Geraline, The How to Replace an Aquabot Classic Robotic Pool Cleaner Drive Belts provides you with the steps needed to replace this drive belt.
 Reply


?     Asked on 6/13/2016 by

I just ordered drive belts for a Aquabot classic. I just want to confirm that each order comes with (2) belts.
 Reply

A  Answered on 6/14/2016 by InyoPools Product Specialist Alan M.

The Drive Belt, Tan, Small; (Single) is a single belt and is not sold as a set. The Aquabot Classic uses (2) Drive Belts.
 Reply


?     Asked on 6/1/2016 by Dan

How many drive belts on Aquabot classic?
 Reply

A  Answered on 6/7/2016 by InyoPools Product Specialist Lennox H.

Hi Dan, The Aquabot Classic uses (2) Drive Belts.
 Reply


?     Asked on 8/3/2015 by

How many drive belts are there in a aquabot exteme?
 Reply

A  Answered on 3/23/2016 by InyoPools Product Specialist Lennox H.

Hi, They are two (2) Drive Belts in a Aquabot Xtreme cleaner.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)