Natural Chemistry WATER CONDITIONER 1/2 Gal - 07410


Model # 07410

By Natural Chemistry

  5 Average  



Model # 07410

Product Description

Natural Chemistry Instant Water Conditioner Half Gallon - Instant Chlorine Protection

Instant Pool Water Conditioner protects your chlorine from the light of the sun. With a highly concentrated liquid formula it is easy to apply and safe for use with all sanitizers and pool surfaces.


  • fast acting liquid
  • Pool friendly pH of 8.0
  • Will not damage pool surfaces or equipment


  • 1 gallon (3.79L) increases CYA level to 32ppm per 10,000 gallons (38,000L)
  • Dosages for fresh water start up (no cya present): Divide pool volume in gallons by 10,000 gallons to determine the number of gallons of Instant Pool Water Conditioner required

How to Apply:

  2. With circulation pump running pour Instant Pool Water Conditioner into pool skimmer slowly OR pour directly into pool water, while walking around perimeter of pool brush to speed absorption
  3. Rinse container with pool water and shake
  4. Pour remaining rinse solution into skimmer or pool


  1. Measure CYA level in pool using cyanuric acid test or have it tested by a professional dealer
  2. If CYA level is less than 30ppm, calculate gallons of Instant Pool Water Conditioner needed using the following formula: (4oz/10,000 gallons= 1ppm increase of conditioner stabilizer level) Tips: Once entire contents of the bottle is used, add water to shake bottle- pour contents into skimmer

Features & Benefits:

  • Dissolves instantly
  • Pool friendly pH
  • Protects chlorine immediately
  • Will not harm any equipment or pool surface

For our complete line of Natural Chemistry Pool & Spa Chemicals

Product Specifications

1/2 gal.

?     Asked on 9/17/2015 by Hannah

Hi! I am interested in your product for use in a science fair project. The goal is to determine the effect of hypochlorous acid on turf grass. Can you tell me if your product is pure hypochlorous acid, or what its chemical formula is? Thank you.

A  Answered on 9/22/2015 by InyoPools Product Specialist Lennox H.

Hi Hannah, The Natural Chemistry Water Conditioner does not contain hypochlorous acid. It consist of Monosodium cyanurate monohydrate 35% and Ingredients 65%.

?     Asked on 12/20/2012 by Guest

What level should my cyanuric acid be?

A  Answered on 12/20/2012 by InyoPools Product Specialist Patrick P.

Cyanuric acid should be maintained anywhere between 30-50 ppm. If you have a salt system, you will need to check with the manufacturer for the recommended level.

?     Asked on 12/19/2012 by Guest

My pool is constantly turning green. The pool company we use shocks the pool every time it turns green but there seems to be no permanent solution. What could possibly be wrong?

A  Answered on 12/19/2012 by InyoPools Product Specialist Patrick P.

Without knowing more about the swimming pool or the water chemistry, it will be difficult to trouble shoot. I would recommend having the pool water tested and make any necessary adjustments. The issue could be something as simple as low cyanuric acid to something more complex.

?     Asked on 11/30/2012 by Guest

Is this conditioner any better than the granular conditioner?

A  Answered on 11/30/2012 by InyoPools Product Specialist Patrick P.

Yes, Instant Pool Water Conditioner is an easy to pour liquid that instantly protects chlorine from sunlight as soon as it is added to the pool water. Granular cyanuric acid is very acidic and it takes from 4 to 7 days to dissolve.

?     Asked on 11/30/2012 by Guest

If I'm not getting a Cyanuric Acid reading with my test, does that mean there is no conditioner in the pool?

A  Answered on 11/30/2012 by InyoPools Product Specialist Patrick P.

Things such as temperature, pH, alkalinity and calcium can cause false readings. Your best gauge for determining whether you have sufficient Cyanuric Acid levels is whether or not your pool is holding proper chlorine levels.

?     Asked on 11/30/2012 by Guest

I have trouble keeping my chlorine level where it belongs. The pH and alkalinity are good. Is there another chemical we can add to keep the chlorine level up?

A  Answered on 11/30/2012 by InyoPools Product Specialist Patrick P.

I would recommend checking the Cyanuric acid levels and adjusting if necessary. Cyanuric acid (conditioner) protects the chlorine from being burnt out by the sun.


Est. Repair Time

Less than 1 hr

Tools Needed


0     1

do you need to run the pool for 24 hours after using the water conditioner

Written on 5/19/2017 by Guest

need to add the water conditioner and was told to run pool for 24 hours after adding. Is that necessary?

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews