Part # 25306-000-020
Manufacturer Code SPX1500D2A-GENERIC
Dimensions 7-1/4" X 5-5/8"
Alternate Part #'s 9348-601, SPX1500D2A
GENERIC - COVER, STRAINER, CLEAR LEXAN WITH O-RING (SPX1500D2A)
This is a generic pump strainer lid manufactured by Custom Molded Products as a replacement for the Hayward SPX1500D2A lid. It is used on some of Hayward's popular above ground pool models such as the Power-Flo LX, Power-Flo 1500 Series, and Power-Flo II & III.
I am Looking for a replacement strainer lid for a Hayward Power Flo LX pump model SP-1580Z2. Strainer itself has sp-1515 stamped on side. Lid has sticker with number SP-1515A. I can't seem to match the numbers up exactly. The part numb (spx1500d2a) seems to look close. Will this fit? What is the difference between the two parts 5111-17A and 25306-000-202?
I bought 2 covers this year. And they both starting leaking. Seems the o ring stretches out. Please explain why.
Hi, Sandi. O-rings can become stretch out if they're not properly lubricated. They will absorb water causing them to expand.
will this cover fit a wayne inground 1.5 hp pump
Hi, Mitch. This cover will not fit any of the Wayne inground pool pumps that I was able to locate.
will this fit a dynamo. some of the label is gone. all i see is model no. dyn11-n1-1.5
James, Yes, this will fit the Dynamo pumps.
How wide is this item. The cover on my strainer is 6.5 inches across.
Hi, Guy. Click link > Product Dimensions to view this lid measurement.
Hi Will it fit Hayward sp2175csa
Hi, Bob. Yes, this Generic - Strainer Cover - SPX1500D2A will fit the Hayward SP2175.
Will this lid replace the Hayward Power Flo LX SP1515Z1BC
Yes, this would be the correct replacement.
Will this replace cover for stark 75117
Hi. This cover will not fit the Stark USA 75117 pump.
Will this fit lomart?
Hi, Joe. Some of the Hayward equipment have been private labeled for different retailers over the years. If you can provide photos of the pump you have we can confirm if this cover can fit your Lomart pump.
Will this cover fit a stark model 75039 / DRQD1502?
Hi, Sandi, This cover will not fit the Stark USA pump, you will need the Pool Pump Cover - PO12728CR.
Will this fit a Utilitech 58410utl1 pump, or do you have any thing that would fit. Thankyou
Hello, The Generic - Cover, Strainer, Clear Lexan With O-ring (spx1500d2a) is a Custom Molded Product and only fits Hayward Power flo, Hydromax, and Hayward Turbo/Power flo.
will it fit a Utilitech 1 HP in and above ground pump #0313509 ?
Hi Mauricio, This strainer cover will not fit the Utilitech pump, we do not have a lid for that pump.
Will this cover fit the above ground pool filter Starbright? unfortunately I do not have the model number. It holds a 1 HP motor
Hi Irene, This cover can be used with the Starbright Pump.
Hayward strainer cover, part # SP1680E
Hi Ronald, This is the generic replacement cover for the SP1680E.
Wi'll this fit the Hayward Matrix models?
Hi Penny, This lid fits the Hayward Power Flo LX but not the Matrix pump. You would need this Hayward Power Flo Matrix Lid.
Does this cover fit the Hayward pump sp1515-1esc
Hi, The Generic - Cover, Strainer, Clear Lexan With O-ring is the correct replacement lid for the Hayward Power-Flo 1500 Series pump.
I need a cover that fits sp1520-z-1-esc
Hi Monica, This cover will fit the Hayward Power Flo Pump's which uses the SP1520-Z-1-ESC motors.
What if it says power Flo matrix? With model # sp1515-z-1-esc
This lid will not work with the Power-Flo Matrix. Part number SPX5500D is the correct lid for the Matrix.
Will this lid fit a model # sp1515-z-1-esc?
The sp1515-z-1-esc motor is most commonly used on the Hayward Power Flo LX pump and this lid does fit the Hayward Power Flo LX. I would go out to your pump and check to see if you see any reference to Hayward Power Flo LX and if the answer is yes then this is the lid for you.
Will this fit older models...20+ years old?
Hi, The Generic-Clear Lexan Strainer Cover w/ O-ring (25306-000-020) will fit any older model pump that uses the OEM SPX1500D2A Lid.
will this fit a blue wave ne6151b 1 hp pump bought at home depot
No this is not the correct lid. The part number for your lid is PO12728CR but is currently not in stock.
Would this lid be compatible with a Hayward Ultra Flo Pump SP2290?
Yes this lid would work on the SP2290 pump.
Would part # 25306-000-020, fit for my Hayward Pump model SP1580X15?
Yes, part # 25306-000-020, generic replacement lid and o-ring, would be compatible for your Hayward Pump model # SP1580X15.
(5 out of 5 stars) Awesome replacement cap
Reviewed By: Tony A. from Swartz creek, MI ()
Pros: Fast shipping, universal fit!
This universal replacement cap was Perfect. Fit my pump perfectly, easy to install, included the O-ring. Received it fast, free shipping, INYO is the only place I shop for pool supplies.
(5 out of 5 stars) Worked perfectly
Reviewed By: Julie B. from Aberdeen, Idaho ()
Pros: Large selection of parts
Cons: so far,none
I was in great need of a lid for my pool pump because the old one cracked as I was removing it. I found it very easy to find the exact lid I needed on this site, ordered it, and had it on my pump within 4 business days! This company usually has the parts I need.