Model # LPL-P2-RGB-120
By J & J Electronics
Model # LPL-P2-RGB-120
Warranty 3-year
Dimensions 5-1/4" x 1"
Alternate Part #'s ELELPL-P2-RGB-120
ColorSplash®LXG Multi-Color In-Ground Pool and Spa Lamps
J&J's ColorSplash® LXG Replacement Multi-Color In-Ground Pool and Spa Lamps offer a variety of lighting modes that instantly transform any in-ground pool into a custom illuminated oasis. Whether the pool is used for playing, relaxing or entertaining, the advanced ColorSplash LXG Series with its multiple colors and light shows create the ideal pool and spa ambiance. The LXG pool lamp features our Zero Pixilation optical diffuser lens resulting in fuller, richer and more even color throughout the water. It can also be used side-by-side with existing XG Series light fixtures. This replacement for traditional light bulbs installs in minutes and provides immediate energy cost savings over incandescent lights
ColorSplash LXG Advantages:
Fixture Compatibility: Hayward® Astrolite SP058 Series; Jacuzzi® Full Moon; Jandy® Pro SeriesWhite; Pentair® Amerlite 784 Series; Sta-Rite® SwimQuip
| Works with J & J s XG Controller | |
| Zero Pixelation Lens, enhances uniformity of light instensity. | |
| Reduce energy consumption up to 90% comapred to incandescent | |
| Operates effectively with most pool automation systems. | |
| Advanced Mico-Processor, Hi-speed performance delivers seamless color transitions. | |
| INSPIRE.FAMILY | LXG |
| Maximum Ambient Temperature (C) | 105F |
| Minimum Starting Temperature (C) | 33F |
| Prod Code | LPL-P2-RGB-120 |
Which Color changing LED bulbs are compatible with my pentair 78458100 fixture?
Reply
Hi JC, any of these 120 Volt LED pool light bulbs are compatible with your Pentair Amerlite pool light model 78458100. I would suggest replacing the lens gasket as well.
Reply
I have a Jacuzzi fixture model # MCFMH 30 Fixture, will this 120-LPL-P2-RGB-120 bulb fit this fixture?
Reply
Hello, these J & J Colorsplash lights are compatible with certain niches so you will need to locate your niche model. Please see this Colorsplash datasheet for compatible niche models.
Reply
How do the colors change? Can you pick/stay on one color?
Reply
You can use the model LPL-XG-CTRL-1 controller that you can view by clicking here or you can use the regular switch to turn the circuit off and on to cycle through the colors or color light shows.
Reply
I Have 2 Jandy WPHV500WS100 and 1 WSHV100WS100 light fixtures. Will the ColorSplash LXG LEDpool lamps 120V fit in my light housings? Do the lights come with the replacement gasket? If not, which gaskets fit my housings?
Reply
Hi, Ralph. Yes, the ColorSplash LXG LED Lamps are compatible with your Jandy White Incandescent Pool and Spa Fixtures.
Reply
I purchased pl5811 and feel it isn’t strong/bright enough. Will this LXG LED be better? I noticed the pl5811 has only 12 watts and this one has 23. I don’t want to purchase another bulb one day after the last one but I would like more light in the pool.
Reply
Does this Pool Lamp Fit/Work in a Jacuzzi Full Moon Light Unit?
Ordering the Jacuzzi "Fullmoon" Light assemely from you and this light was show below in on the same page. Hope it will work?
Reply
Yes, this model LED bulb is compatible with the Jacuzzi Full Moon pool light.
Reply
I have a Sta-Rite metal ring that measures 8.5" outside edge to outside edge. The gasket has ten (10) holes in it and measures 7-5/8" in diameter. The lense has ten (10) holes along the perimeter and measures 7-3/8" in diameter. Do you have a gasket for this light system?
Reply
Hi, Elena. You have the Sta-Rite SwimQuip light fixture, we do carry the SwimQuip Lens Gasket - SQ5057-118 (Standard) and LPL-G-S (Heavy Duty).
Reply
Can these bulbs be used with a dimmer switch? I will have 3 on the same circuit controlled by a dimmer switch.
Reply
Hi, Allen A. The Color Splash LXG lamps cannot be used with dimming systems. You will have to remove the dimming switch.
Reply
can you install a 120v colorsplash lxg series bulb into a 12v system? or do I need to purchase a 12v bulb
Thanks, Tim
Reply
Hi, Tim. You can not install a 120v bulb into a 12v fixture.You'll need the ColorSplash LXG LED Pool Lamp 12V - LPL-P2-RGB-12 which is the 12V option.
Reply
What's the difference between the 2G, and 3G Color Splash LED Light?
Reply
The 3g would be the new technology than the 2G and has a smoother looking light and is brighter, I personally like the 3g.
Reply
For a color-changing LED light, how do I switch between the different settings with just a standard light switch?
Reply
The LED lights are designed to move to the next programmed setting each time you turn the switch on and off. This will toggle through the different color settings and shows.
Reply
What is the difference between the G3 and the G2 LED Light?
Reply
The G3 uses newer technology which gives you brighter light output than the G2, also the older technology on the G2 let's you see individual rays of light where the new technology on the G3 has a much smoother light output. You may view or purchase either light here >http://www.inyopools.com/lights_jjelectronics.aspx
Reply
I have 2G lights in my pool and want to put a 3G light in my spa. Will the 2G and 3G versions synchronize with one another?
Reply
According to the manufacturer, the 2G and 3G versions will not synchronize with one another. To have the lights on the same color rotation, you would need to have the same version in both your pool and spa.
Reply
