CompuPool Salt Chlorine Generator 60K Gallons - CPSC48


Model # CPSC48

By CompuPool

  4.2 Average  



Model # CPSC48

Warranty 3 Year warranty

Product Description

CPSC Series - Self Cleaning

The CPSC Series is a high-performance salt water chlorination system that lets you enjoy perfectly clear pool water without the use of harsh chemicals. It is a safe, clean, easy alternative to dosing your pool with dangerous and expensive chemicals.How does it work?

Salt is added to the pool water, 0.35% - 0.4% salt content. This slightly salinated water then passes through the electrolytic cell and this produces chlorine gas, which prevents algae and purifies the pool or spa.Why Saltwater Chlorination?

  • Irritation to eyes and ears is eliminated
  • Unpleasant taste and odour is greatly reduced
  • No more need to store expensive and hazardous chlorine
  • Fully automatic chlorination
  • Sparkling clear pool water – every day
  • Suitable for all pool surfaces


  • 3500 P.P.M. salt
  • LCD digital display
  • LED indicator lights
  • High and low salt fault lights
  • No flow sensor and fault light
  • Self regulating function if salt content is too high
  • Fully weather protected
  • Winter mode for cold water operation
  • SuperChlor mode for boosting chlorine levels during peak times
  • Touch pad controls that provide easy setting
  • Fully automatic operation – even when the owner is away
  • Easy installation to new and existing pools
  • Reliable and durable for long lasting performance
  • Digital time clock with battery back up timer as standard
  • Cell has push on water proof connectors for simple exchange of cell
  • Advanced high grade U.V. stabilised plastic control unit
  • Large alloy heatsink for heat disipation and corrosion resistance
  • 2 Year Full Warranty* on Power Pack
  • 3 Year Pro-Rata Warranty* on Cell
  • Factory wired at 220v; can be rewired upon installation to accept 110v
  • Produces up to 1.28 pounds of chlorine per day

Click here for more Salt Chlorine Generator

*Warranty Note:
Please Note that Compu Pool reserves the right to determine whether a defective part under warranty will be replaced with a new part, refurbished part or have the part repaired.


?     Asked on 5/12/2013 by Guest

Does the Compupool CPSC48 have a timer?

A     Answered on 5/12/2013 by InyoPools Product Specialist Patrick P.

Yes, the CPSC48 has an internal timer, but it will only turn itself on/off. It will not control your pump.

?     Asked on 10/11/2012 by Guest

What is the difference between the 240v and 120v installation for the CompuPool salt system?

A     Answered on 10/11/2012 by InyoPools Product Specialist Patrick P.

The CompuPool is preset at the factory for 240v. Please refer to pages 10 and 11 of the owner' manual for instructions on how to change the voltage to 120.

?     Asked on 2/29/2012 by Guest

Is the salt included with the salt chlorine generator?

A     Answered on 2/29/2012 by InyoPools Product Specialist Patrick P.

No, salt is not included.  You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool.  Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized.  Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.

?     Asked on 2/1/2012 by Guest

I have a pool that is about 10,000 gallons but I am thinking of buying a salt chlorine system for pools up to 20,000 gallons. Would the larger unit be a problem?

A     Answered on 2/1/2012 by InyoPools Product Specialist Patrick P.

It is not a problem to oversize a salt system.  It would take the larger unit less time to produce the necessary chlorine so it is actually more efficient.  When the pool volume is very close to the capacity of the salt chlorine generator (for example, the pool is 18,000 gallons and the generator is rated at a maximum of 20,000 gallons), we would recommend going up to the next size generator.

?     Asked on 1/26/2012 by Guest

Is the Contol Unit supposed to run hot?

A     Answered on 1/26/2012 by InyoPools Product Specialist Patrick P.

According to the manufacturer, it is common for the Control Unit to be hot during operation.  Because of the transformer inside, it can reach temperatures of 180 degrees in the summer.

?     Asked on 1/23/2012 by Guest

Can I attach the cell to 2" piping?

A     Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

Yes - The 2" piping will slip over and glue to the outside of the barrow.

?     Asked on 1/23/2012 by Guest

Are the replacement cells interchangeable? Can I upgrade my CompuPool Salt Chlorine Generator by exchanging a CPSC24 electrode cell for a CPSC16?

A     Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

No - The Control Units are matched to the Electrode Cells. The larger Electrode Cells have more plates and require more amperage from the Control Unit.

?     Asked on 1/23/2012 by Guest

What happens to all my settings in the Control Unit when the power to the Control Unit is shut off with the pump?

A     Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

The Control Unit has a battery powered backup feature designed for long term memory. It can save your settings for over 6 months.

?     Asked on 1/23/2012 by Guest

Do you sell a CompuPool Salt Chlorine Generator for above ground pools.

A     Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

Yes - We sell a unit for above ground pools up to 20,000 gallons. See  >CPSC16AG You need to order the part # ending in AG.  These units are specially designed with a recepticle at the bottom of the control box to plug in a pool pump. Make sure your AG pool is designed for salt water.

?     Asked on 1/21/2012 by Guest

What is the difference between the cell cord labeled JD363200A and the one labeled JD363200A-11

A     Answered on 1/21/2012 by InyoPools Product Specialist Patrick P.

JD363200A-11 is newer - designed to provide a tighter fit and eliminate intermittent display errors. You can use it in place of the older JD363200A cord.

?     Asked on 1/21/2012 by Guest

Can I buy a replacement cable for my CompuPool Cell?

A     Answered on 1/21/2012 by InyoPools Product Specialist Patrick P.

Yes - The cell cable plug and cord is sold in two lengths 6' (JD363200A-11) and 15' (JD363200B-11). The cords fit all four CompuPool models.

?     Asked on 1/17/2012 by Guest

Does this product include everything I need to install and start using?

A     Answered on 1/17/2012 by InyoPools Product Specialist Patrick P.

The package includes the control box, salt cell, and the power cords for the two. The only thing you will need to purchase separately is the salt, which you can find locally at a home improvement store.


Review Summary

  (Average 4.2 out of 5 stars)
5 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews