Part # 10146
Alternate Part #'s 10112
Top Cap (Single) Does Not Include Support). Top Cap Support 10159
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
Where can I purchase the correct screws to secure the Wilbar 10159 support to the 10146 Top cap? Or what screws do I need? Length, size etc.
Thank you for contacting INYO Pools. Unfortunately, the above ground pool parts are not universal. Before we are able to recommend replacement parts, we'll need to identify the pool. Can you please send us the following images?Outside Pool Wall (Top to Bottom), Top Cap, Top Rail, Upright to AGparts@inyopools.com?
Hello, We have an Artesian Echo Canyon 54 pool (24' round X 54" High). Our pool is approximately 14 years old. We just replaced the liner and found that a couple top caps are cracking.
1. Would these top caps (part # 10146) fit our pool?
2. What support caps should we get for the top cap?
Thanks so much!
I have a Artesian 8500 series pool 21' round. 54" wall. These LOOK identical to my top caps. Will they fit? I got pool in 2007
I need the top ledge that goes with this cap. It is 6 1/2 inches wide and 51 7/8" long on one side and 50 1/2" long on the other. Color is tan or sand. Litehouse pool about six years old
Hello Don, Unfortunately, we can not match parts based on dimensions. We would need the part numbers or for you to send in the following:Please email the following pictures/information to email@example.com: Size & approximate age of the pool Image of the pool wall. Image of the upright Image of the top rail connection to the upright. Name of the pool (if known).
We are trying to find the correct pool caps for a doughboy 24 above ground pool and are not sure we are measuring properly. Please advise.
Hello Rachel, unfortunately, we do not carry any parts that are compatible with the Doughboy pool models.
(5 out of 5 stars) Happy
Reviewed By: Laurel58 from Almond N.Y. ()
Pros: exaclty what i was looking for... fast delivery
Cons: a little pricy ... but that's to be expected when only one company carries what you need
I am so happy I found your site...I have looked and looked on line for a company that sold pool parts ...especially top caps... yours was the only company out of to many to remember and finally I found exactly what I was looking for...I mean the exact match... go figure all my research and only one company that had it all... Thank you Inyo Pools for supplying hard to find parts