Part # 35139
Alternate Part #'s 56391-356-00000
Top Plate Artesian Pool (Single)
This plate is designed for 1" wide stabilizers.
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
I have an Artesian Echo Canyon 24 ft. above ground pool. I am trying to find replacement top plates Artesian part #56396-356-00000. Do you sell a replacement or know where I might be able to find them?
I need 17 top plates. This top plate 35139 looks and the Measurements are Same.I just want to make sure this is the right plate.
Hi, Jack. This top plate has some similarities to your plate. however, is not an exact match. Since you have confirmed using measurements, you can give it a shot.
I'm looking for the top steel plate for my pool.
Artesian pool 8500 Series
My pool takes 19 steel plates
I need all new rop plates. Is the 35139 top plate used for the artisan seville?? Same pool as Wilbar cypress
I have an Artesian 8500 series Sandy Point Ultra. I need one top plate. The original part number is 56396. Will this top plate fit my pool?
The 56396 top plate was discontinued. The 35139 can replace it but you would have to change all of the plates and the stabilizers. The current stabilizers would not fit the 35139 plate.
I'm looking for an Artesian pools top plate, their part no. 56396-356-00000. This part is very similar. Are either of these parts available? Thanks.
The part number you provided does not cross reference anything in our database. The item number 35139 has an available quantity of 2.
Hi Do you know where I can get these part
Unfortunately that part in no longer available. You may want to try searching that part number online to see if another retailer might have some in stock.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Adjustable Wrench
Had to use grinder to remove bolts and then pop off the old plates. The only problem was the lack of instructions on how to install the part. With the help of YouTube I figured it out. Bought stainless steel self tapping screws to reinstall with.