$800.99
By PureLine
Model # 8-PL2624
Warranty 1 Year
This pump was briefly installed by a customer before realizing the wrong pump was ordered. The pump has minor cosmetic scratches but is in good condition. The pump has been inspected and tested. Hurry up and take advantage of this great deal! UNIONS NOT INCLUDED.
Cut cost not quality with the PureLine Prime Pump
The PureLine Prime Pump is our newest, premiere pump that rivals top brands like Hayward, Pentair, Sta-Rite, Jacuzzi, and Waterway for only 2/3 of the cost. The PureLine Prime is paired with the industry’s leading Century motor meaning that this pump is sure to last for years. Equipped with extra large 2” plumbing ports results in higher flow rates and longer motor life. The PureLine Prime is a direct drop-in replacement for the popular Hayward Super Pump. This means that there is no realigning of the plumbing, significantly reducing the time and energy it takes to swap out to a new pump. The Prime pump is backed by a one year warranty.
Prime Salt Friendly
As salt pools become more popular we have built a pump specifically designed for the demanding water conditions of saltwater pools. The most common area of failure on pool pumps is caused by leaking from the shaft seal. Saltwater and Chlorine can be particularly harsh on the shaft seal.
Upgraded Corrosion-Resistant Material
The PureLine Prime Salt Friendly uses an Upgraded Corrosion-Resistant Material called Viton for the shaft seal. This ensures that your pool pump will be running great for years to come so you can enjoy your crystal clear pool.
Great for Non-Saltwater Pools too!
The PureLine Prime Salt Friendly is also great for Non-Saltwater pools. This pump is an excellent Heavy Duty Upgrade for Non-Saltwater pools and is our recommendation for all pools.
Salt Friendly Features:
Salt Friendly Benefits:
Specs:
PureLine Prime Pump Application:
PureLine Prime Pump Benefits:
Pump Curve
I have a jandy2.0 stealth SHPF2.0 pool pump is this a good fit for a drop in replacement pump? ports are 3" height of exit port is 13" inlet is 8 3/4 space between two is 12"
Reply
Hi, Pete P. This Prime Pool Pump 3 HP will not be a good replacement for a Jandy SHPF2.0 pump.
Reply
i have a hayward super pump 2 hp that just went out and want to go up to a 3 hp will this be a good replacement? the pool is a 20' x 43' x 47'
Reply
Hi Ed, unfortunately, this pump model is no longer available but in general when looking to size a pool pump there are a few variables that need to be considered. Here is a guide that we put together called "How to Size a Pool Pump for Your In-Ground Pool" that should assist. You may also want to consider getting a variable speed pump that has a total horsepower of 2.5 - 3 and you will not need to worry about calculating a new pump.
Reply