Can you direct me to the proper hi low switch for this motor?
Reply
Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.
Reply
Hi,
I have a Sta-Rite JWPA S5F-2A4 assembly with a S48B74A03 motor. I would like to replace the failed motor with a two speed motor and a manual switch. Will this motor work/fit?
Reply
Kevin, This motor will work however, it does not come with a switch. You would need to order a replacement canopy with the switch which you can view here: http://www.inyopools.com/Products7/07501352033636.htm
Reply
I am going to order this pump to replace a 2 hp motor #186022. It says it is the replacement pump for my spa.
Because it is less HP will it affect the performance of my jets and spa?
If not and I purchase it, what is the go kit that pertains to this pump?
Reply
Ben, I would not recommend going with a lower horse power. Please send us a photo of your motor label so we can confirm the correct replacement motor.
Reply
i have a starite pool pump that has a noisey pump i have attached a picture of pump info plate will this pump be the one that i need also would i need a new pump seal as well if im replacing motor the current one is not leaking.
Can you please send a side view picture of the entire pump?
Reply
Can this pump be used to replace a Sta-Rite motor model # SA48A53A03? i'm looking for a replacement pump motor for my pump (model No. JWPA5F7L-2A2) and i would like a two speed pump.
Can this replace a Magnetek Century laser spa motor BN37SP rpm 3450/1750 115 volt 11.0 / 185 amp in a Vita spa?
Good day,Yes the Century 1.5 HP Thru-Bolt 48Y Dual Speed Motor - BN50V1 would be the correct replacement motor.
Reply
