Can I covert my overlap liner for my above ground pool to a beaded liner just by buying the bead receiver kit?
Reply
Yes, you can convert your overlap pool liner to a beaded pool liner for your above ground pool, by simply installing the bead receiver kit. The bead receiver kit affixes to the pool by just slipping on top of the pool wall. The beaded liner will snap directly into the bead receiver track.
Reply
What is The Channel On The Bottom Wall That Holds The Wall Called?
Reply
Hi Glenn, I believe you are referring to the base rail. See our quide on "How To Identify the Components of an Above Ground Pool".
Reply
I have to replace an overlap liner. Can I use this to install a snap bead liner?
Reply
Hi Don, You will need the Bead Receiver Kit to install a Beaded Pool Liner or a Uni-Beaded Pool Liners.
Reply
I have a beeded liner 24 foot round above ground pool and it came away from the rim any suggestions? I cant pull it to put back in
Reply
Jamie, If it's not too bad, I've seen some installers use hot water (poured on the liner) to help stretch it back into place.
Reply
my pool caries a j-hook on to of liner now would like to use overlap line can I get a thin liner holder that will go in the small groove on top rail
Reply
Hi, Alabama. You will need to use either Liner Coping Strips with an Overlap liner.
Reply
Can I use this to convert my inground overlap liner to a beaded liner? It's 12 x 20. Thank you!
Reply
Hi, Megan. Yes, you will need approximately 14 of these Bead Receiver Kit. You will also need to purchase a Beaded liner.
Reply
Thank you for answering my question. I have another one before I order. Can you please tell me what other piece I would need, if any, to convert my overlap to a bead with rounded corners. It's not a perfect right angle. Thank you so much!
Reply
Good afternoon, the Bead Receiver Kit (48" Section) - NL109 is flexible and would work for both round and oval pools.
Reply
Do you know if this kit will fit my esther williams above ground 24’ round pool?
Thanks!
Reply
Hello - the Esther Williams and Johnny Weissmuller beads are larger than these standard bead receivers can take in. If you need to switch the your receivers, you would need to change to a standard bead liner as well
Reply
Does this bead receiver kit fit a Fanta-Sea or Kayak above ground rectangular 16 x 32 pool? I am looking for new coping to replace twisted sections, will this work?
Reply
Hi, Jonathan. Unfortunately, this Bead Receiver Kit is not compatible with Fanta-Sea or Kayak above ground pools.
Reply
