1. Home
  2. Ladders / Fence / Steps
  3. Inground Pool Step
  4. NE102
  5. Q & As

?     Asked on 6/23/2006by Guest

Can you tell me the weight capacity of these stairs? Thank you!
 Reply

A  Answered on 6/23/2006 by InyoPools Product Specialist Patrick P.

The weight capacity of these stairs is 400 Lbs.
 Reply


?     Asked on 5/14/2009by Guest

I have a 16x 32 inground pool Th bottom angles from 42" to 47" in the first 48" in length. Will this item work for me or is it designed for a flat bottom pool?
 Reply

A  Answered on 5/14/2009 by InyoPools Product Specialist Patrick P.

Unfortunately this will not work for your situation. These steps are designed for a flat bottom.
 Reply


?     Asked on 6/5/2015by ELLEN BAGLEY

DO YOU HAVE AN OASIS DROP-IN POOL STEP WITH 4-STEPS? THANK YOU
 Reply

A  Answered on 6/5/2015 by InyoPools Product Specialist Patrick P.

Hi Ellen, I am sorry but we do not have a 4 step inground pool step. The oasis has actually been replaced by the Grand Entrance Pool Step which you may want to view as I think it is better quality.
 Reply


?     Asked on 5/28/2016by Ralph Bowles

I am looking for a ballast step/ with sand cap for an Oasis 5445, the part is #5-5445, new or used, if you of a pool supply or individual that may have one it would be greatly appreciated. Thank you Ralph.
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Lennox H.

Hi Ralph, Unfortunately, we do not have parts for this step, you can Lumi~O for replacement parts.
 Reply


?     Asked on 5/30/2016by Ron

Is there a 4 step option around 42 inches.
 Reply

A  Answered on 6/3/2016 by InyoPools Product Specialist Lennox H.

Hi Ron, We do not have an 4 step in-ground step that is 42"H.
 Reply


?     Asked on 6/23/2018by Kim Maggio

Do you have any inground pool stairs available??? Website only shows 1 that "is no longer available"
 Reply

A  Answered on 6/23/2018 by InyoPools Product Specialist Megan C.

Unfortunately, we do not. 
 Reply


?     Asked on 9/18/2018by Inyo Visitor

is there a way to take the hand rails off to close pool with cover
 Reply

A  Answered on 9/18/2018 by InyoPools Product Specialist Lennox H.

Hi. The screws can be removed allowing the handrails to be removed from the step. 
 Reply


?     Asked on 3/28/2019by Monique Boyd

I am looking for an inground pool step. This one says no longer available. Do you have one that is?
 Reply

A  Answered on 3/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Monique. We do not have an inground pool step at this time.
 Reply


?     Asked on 8/8/2019by Jerry Colbert

what are the dimensions of this unit?
 Reply

A  Answered on 8/9/2019 by InyoPools Product Specialist Joe S.

Anchors are 8 in. on center; Anchors and escutcheons are sold separately1.90 in. diameter tube is made of .049 in. thick #304 stainless steel
 Reply


?     Asked on 9/3/2019by Jeff

Can these steps be left in the pool for winter Or is this not recommended
 Reply

A  Answered on 9/4/2019 by InyoPools Product Specialist Lennox H.

Hi, Jeff. Unfortunately, the step will have to be removed from the pool if temperatures fall below freezing. 
 Reply


?     Asked on 9/24/2020by Inyo Visitor

can these steps be used in a salt water inground pool?
 Reply

A  Answered on 12/23/2020 by InyoPools Product Specialist Joe S.

Good day, yes the Inground Pool Step w/ S.S. rails (5445) - NE102 can be used in a salt water pool.
 Reply


?     Asked on 5/4/2021by Debbie Lamie

Do you think these steps will ever be available again? I have these, and I love them. The stainless steel handrails have gotten holes in them from years in the water and chlorine. I would love to have another set of the very same steps.
 Reply

A  Answered on 5/4/2021 by InyoPools Product Specialist Robert M.

We have not been able to source this step in a few years. We're not optimistic that we'll have it again.
 Reply


Back to Details Got a Question?