This piece has or looks to be loose from the rest will it being loose cause it to suck in air while running n how do I tighten it back up? I can see the screws on the inside but not sure how to get this piece tightened back up. Thanks
Reply
Hi Sumer, If the part is not secured to the housing air can get into the lines. The Housing is secured to the pump cover using the Pool Pump Clip.
Reply
This is what I need, but how do I remove it and reinstall new part
Reply
Hi. To remove the housing from the old pump you will have to remove the Pump Cover, remove the Basket and the Pull the Housing Clamp/Clip which will allow the housing to separate from the pump. Reverse the steps for the installation.
Reply
I have a blue title wave dual pump and the model number is RS4G2413L what's strainer housing will I need
Reply
This PO12728SH Strainer Housing would be the correct Strainer Housing for the Blue Wave Tidal Wave 2 Speed Pump.
Reply
I have a pump that I can't find much info on.
One model number says JH115VNSGG and the other says motor model number RS4G242I3L. Will this part work?
Reply
Hi, Kyle. Yes, this Pump Strainer Housing the will fit your model pump which is a Blue Wave Tidal Wave Pump.
Reply
What size hose fits on here?
Reply
Hi, Tim. You can use either a 1-1/2" or 1-1/4" hose with this housing depending on the Hose Fitting Adapter used.
Reply
Will it fit the SPLAPOOL 72728? I'm assuming it will, since you have already stated it will fit the 72729 & 72730. But I want to be sure before spending the money.
Reply
Dan, Yes this will fit the SPLAPOOL 72728.
Reply
Will this fit my Everbilt 1 hp pool pump? I am looking to replace my strainer because it is leaking.
Reply
Ren, in order to suggest replacement parts for this pump we will need to know the specific model number of the pump. Can you please provide that information?
Reply
Will this fit as a replacement for a PPGF15?
Reply
Hi Samantha, I'm sorry this is not the replacement for the PPGF15, you may want to try this company abespools.com/product/above-ground-pool-pump-pp-gf15/
Reply
Will this work for replacement of
jhs15dnsgg
Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Additional photos
Hi Amanda, Unfortunately we cannot confirm that this part will work as a replacement for your pump. We do carry this complete PL1502 1.5 HP Pure Pro XL Pump which would be a drop in replacement for your current pump.
Reply
Will this work for my Hayward sand pump?
Hi, No this will not replace the Hayward Pump Housing in your photo. You will require this Hayward Pool Pump Housing
Reply
