Will this transmitter work for a Fiberstars Model 6004?
Reply
The Fiberstars WPC Transmitter will only work with the WPC1 and WPC2 Controller. You can verify with SR Smith to see if the controller can then control the Fiberstar Lighting model 6004.
Reply
Do you sell a replacement timer for the Fiberstars wpc-1
Reply
Hi Todd, Yes we do carry the WPC Replacement Timer here.
Reply
My electricity was momentarily interrupted, off/on within 15 seconds and now I can't re-synchronize my lights. any suggstions
Reply
Hi Marilyn, The problem could be the WPC Repeater or the controller, a technician will have to take a look at the system to find out where the actually lies.
Reply
I have a remote from 2007, it is a RM600 and it needs replacing can you help me with this?
Reply
Is there a timer that can be installed to automatically turn on the lights each night or just the remote?
Reply
Hi, George. If the light is wired to the circuit controlled by the remote, the timer function will not control circuit 1 & 2. You can review the WPC1XXXXT Owner's Manual for additional info.
Reply