I need to replace just my S200 Hayward sand filter (dome). I don't need the Vari-flo valve. I just replaced that last year. Can I purchase the dome unit separately?
Reply
All of the S200 individual components are available, You can find them on our Hayward S200 Part's Page.
Reply
Do I need the dome wrench as well as the s200 filter?
Reply
Hello Pat, having the dome wrench around is a great idea. If you need to do an maintenance when you clean the filter it makes the job a breeze.
Reply
Does the sand come with the S200 filter? If not where can I get the sand?
Reply
Hello Pat, this unit does not come with the sand. You can purchase zeobest which is a sand alternative only requiring 100 lbs. Part number would be NA5102
Reply
MY POOL IS 18' X 36' WITH 25000 GALLONS OF WATER
CAN THE S200 FILTER REPLACE MY S240 WITH THE SAME RESULTS
Reply
I have a hayward S200 sand filter and the top of the filter has a crack. do you sell the cover only?
Reply
Hi, We do have the Dome Lid - SX200K and the Filter Tank Top - SX200BT available.
Reply
I have a 16x32 inground pool , 7.5 on the deep end, will the S200 work with my pool and is the side mount better or the same as top valve. I look forward to your reply
Reply
Hi Don, This unit is adequate for a 16'x32' pool if your pump has a flow rate of 44 gpm or less. You may have the run the pool for 8-10 hours. The side mount and top mount filters are the same just depending on your preference.
Reply
I have the hayward s200 filter and sand is being pushed out into the water. Is it the lateral arms causing the problem? I may also need to replace a gasket on the multi flow valve. Can you give me the correct part name and number to replace that gasket on the Hayward s200 series?
Reply
do you have a specific O-ring part # for the top piece.. i replaced the original which was more like a flat disk with a regular circle O ring and it seems to suck in air now.. but i can never find the original..
Reply
Hi J, You will require this Hayward S200 Dome O-ring here is the Parts Listing for the Hayward S200 Filter
Reply
I have a S-200 filter paired with a Variflow sp-710 multiport valve.
The threaded connectors to the bulkheads on the filter have age cracks. Will a split connector work and what size is needed.
Reply
Hi, Unfortunately, there is not a split nut available.
Reply
Does the S200 filter come with side mount valve?
I have a old S240. Is the S200 a good filter to replace my old S240?
Reply
Hi, Mac. Yes, the side mount 1-1/2" VariFlo Valve is included with this filter. You can use the S200 if your pumps flow rate does not exceed 44 GPM.
Reply
do you have this in stock?
Reply
Unfortunately we are currently out of stock on this sand filter. We do have a similar version of this filter in stock by Pentair and you may view that sand filter by clicking this link here - Pentair Side Mount Sand Filter
Reply
