1. Home
  2. Lighting
  3. LED Pool Lights - LED Spa Lighting
  4. Color Changing LED Pool & Spa Light Fixtures
  5. Hayward ColorLogic 4.0 LED Pool & Spa Lights
  6. W3SP0527SLED100
  7. Q & As

?     Asked on 4/21/2013by Guest

Do you sell a replacement bulb for the Hayward ColorLogic LED light?
 Reply

A  Answered on 4/21/2013 by InyoPools Product Specialist Patrick P.

Unfortunately there is no replacement bulb for the Hayward ColorLogic lights, they are sealed units. You would need to replace the entire light itself.
 Reply


?     Asked on 10/6/2014by Guest

Will light SP0527SLED100 work with a Jandy Aqualink remote?
 Reply

A  Answered on 10/6/2014 by InyoPools Product Specialist Patrick P.

As far as turning the light on and off you would be able to control the light, but you will not be able to change the colors using the remote.
 Reply


?     Asked on 5/12/2015by bILL

With just the color logic light and no additional controller, using the light switch how many colors, shows, etc. can I get.
 Reply

A  Answered on 5/12/2015 by InyoPools Product Specialist Patrick P.

Hi Bill, This light has 7 light shows and 5 fixed colors.
 Reply


?     Asked on 5/3/2017by Josh

what is the measurement around the out side of the light
 Reply

A  Answered on 5/3/2017 by InyoPools Product Specialist Scott W.

The outside diameter is 10-1/8".
 Reply


?     Asked on 7/25/2017by Inyo Visitor

Can the bulb be replaced in SP0527SLED model light? And if so, what is the item #
 Reply

A  Answered on 7/25/2017 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, replacement bulbs/engines are not available for this fixture. 
 Reply


?     Asked on 10/29/2021by Jeff Slack

I currently have 2 of the SP0525SLED100 in my pool, one has failed. The replacement light is SP0527SLED100, do I have to replace both lights?
 Reply

A  Answered on 10/29/2021 by InyoPools Product Specialist Rich N.

Hi Jeff, you do not have to change your old light, but, when installing a Universal ColorLogic Gen 4.0 light into a pool with other existing lights, the desire is to match the color and intensity with the other lights in the pool for consistency.  Click here for how to do that.
 Reply


?     Asked on 3/24/2022by Robert Stein

I have an 18 by 36 inground which I would like to illuminate. It has 3-6 foot panels at the 18 foot end. (Heldor, I believe) That means a fixture cannot be installed center of the 18 foot end. I wouldn't want it off center. Is 2 lights at 6 feet from the 18 foot end better? I see the long end (36 feet) shining away from the house has become popular. How about 3 at 9 feet spacing. Is that too much? Thanks
 Reply

A  Answered on 3/24/2022 by InyoPools Product Specialist Rich N.

Hi Robert, 2 lights is probably plenty, but we would not recommend putting them next to each other.  There are a lot of options these days - review our guides on How Many Lights Do I Need For My Pool? and How To Understand Pool Light Options to get a better understanding of what is available.  
 Reply


?     Asked on 2/1/2023by BILL

IS IT POSSIBLE TO JUST REPLACE POOL LIGHT UNIT ONLY SND NOT THE WIRE? POOL LIGHT TRIPS AFTER ABOUT 4 HOURS OF USE…SEEMS ITS THE UNIT BEHIND THE LENS AND NOT THE WIRE. IS THIS POSSIBLE?

 Reply

A  Answered on 2/1/2023 by InyoPools Product Specialist Rich N.

Hi Bill, unfortunately, some pool lights are not particularly serviceable.  You will need to replace the light and the cable if there is an issue with your model of pool light.  Check our guide on Troubleshooting Your Pool Light to be sure there is no other issue with it.
 Reply


Back to Details Got a Question?