?     Asked on 9/3/2016by Inyo Visitor

can i install and echo star variable speed pump using the existing timer?
 Reply

A  Answered on 9/16/2016 by InyoPools Product Specialist Alan M.

You can install the Hayward EcoStar Variable Speed pump to your existing timer, but really the timer you have becomes obsolete. The VS pump has a built in timer. If your existing timer has the on/off pins, you can remove them and maintain continuous power to the VS pump.
 Reply


?     Asked on 3/21/2017by Inyo Visitor

I have a Hayward Ecommand 2 controller (5 years old) system with a 2HP standard pump for a 25000 gallon pool with water feature(six spitters on an Auxilliary Y valve)... The pump just went...I would like to upgrade to a variable speed pump. What is your recommendation (?tri-star 1.85 HP??) Does/will the pump interface with the Ecommand 2 system or just use all by itself? Perry PS, I have purchased heat pump and controller through your company as well.
 Reply

A  Answered on 3/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Perry. The TriStar VS pump can be wired to the Ecommand controller using the Relay Configuration which would provide limited options. You would need the SP3200VSP model rather than the SP3200VSPND.
 Reply


?     Asked on 4/17/2017by Tom

My pool pop-ups aren't cleaning very well with my new variable speed pump. What are the proper rpms for a pop-up cleaning system?
 Reply

A  Answered on 4/17/2017 by InyoPools Product Specialist Scott W.

What is the distance from your pump to your pop-ups so I can calculate the flow rate for you.
 Reply


?     Asked on 4/26/2017by mike

I have a Hayward SP3200VSPND Variable pump. I am having an air leak problem, I have replaced the drain plugs and o rings, the strainer cover and seals, the strainer basket as well. I have an air pocket that continues to build on the left side of the basket that turns into a cyclone spinning inside the strainer basket after a couple hours. It takes me about 5-6 minutes to bleed out the air each time. My question, can the strainer basket housing itself warp, or go bad.
 Reply

A  Answered on 4/27/2017 by InyoPools Product Specialist Scott W.

Yes, it is possible that the pump housing can warp, but if you are bleeding the air from the filter your leak may be coming from the filter.
 Reply


?     Asked on 5/7/2017by ASK

I am trying to decide on witch VS pump to get. I have been looking at Hayward, pentair and pureline. I would like a pump that has a built in timer so i can set turn on off times.
 Reply

A  Answered on 5/7/2017 by InyoPools Product Specialist Scott W.

I recommend part number PL2615. That pump has the capability to pump everything with your pump from your phone.
 Reply


?     Asked on 12/26/2018by Tom P

I have a 14,700gal inground pool with 1.5in pipes and 40ft of head. I'm also thinking of adding a solar water heating system on a roof which is 12ft above ground. I can upsize the pipes near the filter and pump as well as the solar heating system. Located in Florida. Would this pump be suitable for both the current and expanded system or do you recommend another? Thanks.
 Reply

A  Answered on 12/27/2018 by InyoPools Product Specialist Jamie H.

Hi Tom, the SP3200VSPND is the version of the TriStar VS Pump designed to connect directly to Hayward Automation Systems.  If you do not have a Hayward Automation system, the SP3200VSP has an Integrated, programmable digital interface with a 24-hour programmable clock and up to 8 custom timer functions.  Both models of this pump are suitable for your application.
 Reply