?     Asked on 2/1/2012by Guest

I have a pool that is about 10,000 gallons but I am thinking of buying a salt chlorine system for pools up to 20,000 gallons. Would the larger unit be a problem?
 Reply

A  Answered on 2/1/2012 by InyoPools Product Specialist Patrick P.

It is not a problem to oversize a salt system.  It would take the larger unit less time to produce the necessary chlorine so it is actually more efficient.  When the pool volume is very close to the capacity of the salt chlorine generator (for example, the pool is 18,000 gallons and the generator is rated at a maximum of 20,000 gallons), we would recommend going up to the next size generator.
 Reply


?     Asked on 2/29/2012by Guest

Is the salt included with the salt chlorine generator?
 Reply

A  Answered on 2/29/2012 by InyoPools Product Specialist Patrick P.

No, salt is not included.  You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool.  Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized.  Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
 Reply


?     Asked on 5/21/2018by Marion Insabella

Does the Intellichlor IC60 and power cell come with a tranformer
 Reply

A  Answered on 5/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Marion. There is a transformer inside of the Power Center. 
 Reply


?     Asked on 6/25/2019by Russell Sparks

I have a 17,000 gal in=ground gunnite pool. If IC40 is better than IC20 for it would IC60 be even better?
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Hector F.

Technically yes, this would be a better-sized system however, you don't really need that much extra capacity. A 40k model would be more than enough. 
 Reply


?     Asked on 7/1/2019by Louis Kranyak

Is the power plant for the Pentair IC40 the same for the IC60?
 Reply

A  Answered on 7/1/2019 by InyoPools Product Specialist Lennox H.

Hi, Louis. Yes, the Pentair IntelliChlor Power Supply - 520556 is the same for both the IC40 and IC60.
 Reply


?     Asked on 7/1/2019by Louis Kranyak

Does a high salt level damage a Pentair IC40 Chlorine Generator?
 Reply

A  Answered on 7/1/2019 by InyoPools Product Specialist Lennox H.

Hi, Louis. A high salt level along with an unbalanced pool can cause damage to the cell and other pool equipment. Info can be found on pages 9-14 of the Intellichlor Owner's Manual
 Reply


?     Asked on 3/22/2020by Michael A Tomlin

What is the length of the power cord.
 Reply

A  Answered on 3/23/2020 by InyoPools Product Specialist Lennox H.

Hi, Michael. The cord from the cell to the power supply is 15 ft. There is an Extension Cord 15 ft - 520734 available. 
 Reply


?     Asked on 5/2/2020by Chris Mentone

My pool is around 50,000 gallons. Is the Intellichlor IC60 Cell and Power Center good for my pool?
 Reply

A  Answered on 12/10/2020 by InyoPools Product Specialist Hector F.

Hi Chris, for a 50k gallon swimming pool a Pentair model IC60 salt chlorine generator will be a good model for it. 
 Reply


?     Asked on 7/29/2020by Darrell Stafford

My pool is at 60,000 gallons. I've been told that the salt level is hard to maintain with larger pools. Is that true
 Reply

A  Answered on 10/27/2020 by InyoPools Product Specialist Hector F.

Hi Darrel, we would not necessarily say that however a leaking pool or a pool that loses a fair amount of water may make the maintenance of a saltwater pool a bit more difficult. Here is a guide that we put together called "How To Maintain a Salt Water Pool" that may further assist. 
 Reply