1. Home
  2. PHK2RAY6E102L
  3. Q & As

?     Asked on 8/23/2013by Guest

What is the voltage and amp rating for the Sta-Rite PHK2RAY6E102L?
 Reply

A  Answered on 8/23/2013 by InyoPools Product Specialist Patrick P.

The PHK2RAY6E102L is listed as a 230v pump. It runs at 6.0 amps on the high speed and 2.3 amps on the low speed.
 Reply


?     Asked on 3/27/2015by joe

what rpm or gpm does high and low speed produce
 Reply

A  Answered on 3/30/2015 by InyoPools Product Specialist Robert M.

Hello Joe - The RPM's on high are 3450 and 1725 on low. At 40' of head, this pump would push 65 gpm on high and 30 gpm on low.
 Reply


?     Asked on 6/24/2015by Ted

how many GPM in each speed
 Reply

A  Answered on 6/24/2015 by InyoPools Product Specialist Hector F.

Please click here to view the pump's manual. Page 12 shows the pump curve including the gpm rates.
 Reply


?     Asked on 8/29/2017by Ray M. Thompson

Can you buy a rebuild pump kit for a Model 2 SP PHK2RAY6E-102L? And what does it cost?
 Reply

A  Answered on 8/29/2017 by InyoPools Product Specialist Lennox H.

Hi, Ray. You can use the GOKIT78 which includes the pump seal, o-ring, and gasket for this pump. There is no other kit available for this pump. 
 Reply


?     Asked on 8/18/2018by Richard

If I get a 1 HP 2 speed pump for a 5000 gal pool, is there any trouble with using the Hayward filter designed for the 1.5 HP pump?
 Reply

A  Answered on 8/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Richard. Yes. You can use a filter that has a higher flow rate than what your pump can generate.
 Reply


?     Asked on 9/30/2019by Inyo Visitor

Do you have a part number for the capacitor on this pump I need a new one?
 Reply

A  Answered on 9/30/2019 by InyoPools Product Specialist Michelle B.

Hello, I can look into this for you. Can you please send a picture of the motor label?
 Reply


?     Asked on 5/5/2020by John Harris

Does this 2 speed pump come with a toggle switch to change between hi and lo speed? If not can one be purchased?
 Reply

A  Answered on 1/20/2021 by InyoPools Product Specialist Hector F.

Hi John, this unit does not come with a toggle switch. You would need to order Bracket With Black Toggle Switch (17590450)
 Reply


?     Asked on 6/15/2020by Shawna

Hi, I have a sta-rite (Pentair) PHK2RAY6e-102L pump (HP 1.0/0.12), SF HP 1.25/.015, self priming 230 v dual RPM (3450/1725) pool pump and I need to replace the run capacitor. Do you happen to know what the capacitor type I should buy to replace it with?
 Reply

A  Answered on 6/15/2020 by InyoPools Product Specialist Lennox H.

Hi, Shawna. You will need to provide us with the Part, MOD, or CAT number from the motor. 
 Reply

  • Commented on 6/15/2020 by Product Owner

    Hi, not sure if this provides what is needed. I called Pentair and even they could not tell me the run capacitor type.

     Reply

    • Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.

      Shawna, Thank you. The replacement Run Capacitor is P/N 195662-25 which is out of stock at the moment. 
       Reply


Back to Details Got a Question?