Looking at the ECO3 retrofit cartridge kit and description i see the 2 filters but what is the black disc leaning against the large filter? Does it come with the filters?
Reply
Hi Randy, The Black Disc is the manifold and it's included with the filters.
Reply
Hello, my System 3 does not have a manifold. What is the purpose of a manifold?
Thanks
Reply
Hello, Ron. The manifold is required for the ECO3 Retrofit Cartridge Kit for System3 S7M120. The manifold is an updated part used in seating the cartridges into the bottom tank assembly.
Reply
When I tried to install the manifold, I found that the water inlet inside my tank was blocking it. I could not get the part to fit in the bottom of my tank. What do you advise?
Reply
Hi, There is a right and a wrong way to installed the manifold into the tank. If you're still having issues installing this kit you can contact Filbur at (888) 424-9185.
Reply
Reference ECO3 Retrofit Cartridge Kit. When purchasing an OEM System 3, S7M120 cartridge from Sta Rite there is no manifold device. What is the purpose of the manifold and does it create any back pressure from the restricted flow. It obviously redirects a greater amount of water through the filter vanes, I suppose for maximum cleaning. Is this endorsed by Sta Rite?
Reply
Hi, JStaz. The purpose of the manifold is to maximize water flow utilizing the filter square footage. This product is not endorsed by Sta-Rite.
Reply
what replacement kit do i need to order for a system 3 model s8m150
Reply
Hello, You would not need a retrofit cartridge kit. These are the cartridges you will need, http://www.inyopools.com/Products/04200978001019.htmhttp://www.inyopools.com/Products/04200979001020.htm
Reply
