Does the 4610 O-ring fit the FNS Plus Pentair 48" Tank ? It's not clear to me.
Reply
Yes , the 4610-38 will fit the 48 sq ft FNS Plus tank. It will fit all the FNS Plus tank models.
Reply
is this the o ring that connects the 2 tank sections together via a SS ring on outside?
Please give part # for this. (quad 60 model) jimcha@sbcglobal.net
Reply
Hi Jim, This is the o-ring for the Pentair Quad D.E. Filter that goes in between the top lid and bottom tank. You can locate all the part via the Pentair Quad D.E. Filter Parts.
Reply
Is this O ring the correct part for my Nautilis NS-24 filter. They don't give a lot of dimensions except 1/2 inch thick. I need a 56 in circumference and 18 inch diameter.
Reply
Hi Clinton, The 18" Tank O-ring (PF15-2127) is the correct o-ring for the Nautilus NS Filter.
Reply
Does this o-ring fit Pentair FNS Plus 60 model #180009?
Reply
Hi, Kim. Yes, this Body O-ring - 071439 will fit the Pentair FNS Plus Filter.- 180009.
Reply
I have a purex triton fnsp 36 every time I type this in it goes to Pentair are these the same looking for big o ring for lid and few other parts but having trouble looking up is the 4610-38 the right one. thanks
Reply
The 4610-38 would be the correct o-ring.
Reply
Looking for an o ring, gauge - part number 15-4661. This is for a PAC -Fab Nautilus DE filter Model # NSS-48. This is from an older model service manual.
Reply
Is this the correct o-ring for a purex triton fns plus de filter? I found the bag of the one we're currently using and it says American o-497-9. When I compare the two, they are different diameters and thickness. Which one is the correct one? Thanks!
Reply
Hi, Teresa. This is the correct Tank O-ring - 071439 for the Triton FNS Plus DE filter. The o-ring p/n O-497-9 will not work.
Reply
Hi,
Can you please direct me to the Main "O-Ring" for PN DE4820? Manufacture is Hayward.
I need the Part Number to "Main O-Ring" PN______________________________?
I Also need the COMPLETE ASSEMBLED Part Number for filter 3620DE, The one "already to go" out of box and put inside the Filter Tank.This is where I would be be needing the main o-ring seal once I close tank and tighten with "Clamp Screw-On"
I will send photos if require. I think my desdription should be sufficient.
Reply
I Bought P24218 for Titan RPM. Its 1/2 inch , too thick. Is there another size lid Oring that may fit the titan?
Titan RPM Vertical
Model # 56623200.
60 Sq ft
Reply
Hi, Larry1. There is not another size o-ring that will work with the Titan RPM Vertical Grid D.E. Filter. This is the only size that will fit.
Reply
Will this item fit the pentair 4000 series?
Yes this is For Use With SMBW CF/4000 Series, Clean & Clear and FNS Plus Filters
Reply
Yes, this is the generic oring for the 4000 series
Reply
yes it is correct for the 4000 series
Reply
Will this fit CCP320?
Reply
Yes, the P24218 tank body o-ring is the replacement for the Pentair Clean & Clear 320 Sq Ft.
Reply
I have a Pentair 420 Model 178557 Rev E which I need to replace the 0-ring which has enlarged over time and hard to reassemble after cleaning filters. Please confirm the correct part # so I can order it from you. Thank, Dale D
Reply
Hello - if you have the Pentair Clean & Clear Plus Cartridge Filter, this is the correct replacement tank body o-ring. Unfortunately, I cannot verify that model number (178557) in our database or Pentair's catalog. Can you confirm on your end that the amount listed above is correct?
Reply
I have a 2003 pentair clean and plus cup 320 will this fit the old filters
Reply
I need O-Ring for Pentair DE filter housing (between cover and bottom) it has stretched badly. SYS ST50 DYNII N1 rest of numbers faded. S/N 0205067060027B
Hi Cher, For your ST-50 Pentair Star DE Filter you will require this ST-50 Tank Body O-Ring
Reply
Great! I would like to order that, where do I handle this?
Reply
Hi Cher, Please click this link here ST-50 Tank Body O-Ring and you can place your order online. Or give us a call at 407-834-2200 and let the representative know that you need to order part # 4610-26
Reply
Hi, Is this the inner O-Ring seal that goes between top, and bottom halves of filter body? Just outside the stainless steel inner retainer. I have a Pentair Quad D.E. 100 filter. Thank you.
Reply
Hi Peter, yes this is the correct body o ring for the Pentair Quad D.E. filter series.
Reply
I have a FNSP-60 P/N 190029 Rev.D (see Picture). Last year I ordered this O-ring and some others (see picture of order for part numbers) but they did not fit so I continued to use the old ones and the tank leaked all year. I thought I would get your input this time. Could you please provide the web links for those proper parts.
Thank you.
Hi Steven, please see the Pentair FNS Plus D.E. Filter parts diagram where all parts are listed for the FNSP60 model filter. Sometimes having a new lid or base with an older lid or base that has expanded over the years may not seal. Also, you may need to lubricate the o ring to help it seal.
Reply
Will this o ring fit for the Titan RPM Model 5663200?
Reply
Yes this o-ring will work on the Titan RPM Model. I would also suggest a tube of this Pool O-Ring Lubricant for the o-ring.
Reply
Does this o-ring have one side flat, and one side round? Thanks.
Reply
This o-ring is round and does not have a flat side. O-rings often develop a flat side after being installed for many years, which signifies that it is time to replace them. Be sure to clean the sealing surfaces well and put some lubricant on a new o-ring to help it seal well and last a long time.
Reply
Can you tell me if this O ring will fit my filter.
Hello Maggie. The Pool Filter Tank Body O-ring is the correct tank body o-ring for the Pentair Clean & Clear Plus Cartridge Filter.
Reply
