Is this the correct part for model s244t?
Reply
No this is not the correct lateral assemby for the Hayward S244T filter, you would need the Hayward S244T Lateral Assembly here.
Reply
I have model number sm1915shg. What lateral and pipe center do I need. We ordered sx164-da and center pipe not long enuff
Reply
Hi Dawn, The Lateral Assembly With Pipe (SX180DA) is the correct assembly you will need for the SM1915SHG filter.
Reply
I have a Hayward filter model S190TSCP.
What model lateral does it use?
Reply
Hi, Mike. The Lateral Assembly With Pipe - SX180DA is the complete assembly that can be used with the S190TSCP filter. The replacement laterals only are part number SX200QN and SX200Q (Pre-2005).
Reply
I have a hayward pro series model S166T what lateral do I need to buy?
Reply
Hello, this would be the correct lateral assembly for your sand filter. If you are looking for individual laterals, the old threaded style can be found here, while the new pivot style can be found here.
Reply
I have filter model S190TSCP will this fit?
Reply
Hi, Billy. Unfortunately, this Lateral Assembly with Center Pipe - SX164DA will not fit the S190TSCP model filter. The lateral assembly for that model filter has been discontinued.
Reply
The label has worn off of my filter except a small piece that has (I guess) the model number S--180T anyhow I'm trying to get a new stand pipe and laterals. I was at first advice that the SX210DA would fit ,I ordered it but the center pipe and the laterals are all to long. After doing more research I think the SX164DA is the one I need, could you confirm please.
Reply
The lateral assembly for the S180T is SX180DA
Reply
You may want to double check your filter, we list SX180DA for folding lateral ASSEMBLY WITH CENTER PIPE (S180T1997-ON) HAYWARD DIRECT IS 1888-HAYWARD
Reply
The lateral assembly for the S180T is SX180DA
Reply
the correct part # should be mfg # SX180DA ( 31-150-1300 )
Reply
I have a Hayward variflow valve # SP714G11M which Lateral Assembly with Center Pipe do I need?
Thanks,
Don
Reply
Hi, Donald. You will need to provide us with the tank model. We're unable to use the valve to locate the Lateral Assembly.
Reply
I have a Sta-Rite T-240BP-1 sand filter and I need to see if this is the correct part to replace my laterals. I have sand in my pool after I just changed the sand.
Thank you
Reply
Hi, Paul. The correct parts you will need based on your filter model are P/N WC137-519P and 24600-0003 qty of 8.
Reply
I have a Hayward S230T 23" sand filter. i need to replace the lateral assembly with the center pipe. What is the correct part number?
Reply
I have a Hayward High Rate Sand Filter, Model S220-T. I need the inside assembly with fingers. the length of my assembly is 26-1/2", with just the length of the pipe being 20-1/2". None of the online sites give the length of the pipe. Please tell me the part number for the assembly to fit this pump.
Thank you.
Reply
Hi Gary, Please click this link for the Hayward S-220T Stand Pipe Assembly that you will require. You can also click this link for the Hayward S-220T Stand Pipe Assembly Dimensions.
Reply
we have a Hayward filter model number S180T. We are needing a lateral assembley with pipe but want to get the correct one. There is a number on the bottom of the old assembley S202-01. Can you please let me know the correct lateral assembley with pipe to order
I need a Lateral for Hayward S210T will this work?
Reply
Hi Brandon, you can use two laterals for the Hayward sand filter model S210T. Please see the two options on this parts diagram at key number 8.
Reply
