?     Asked on 5/17/2015by Inyo Visitor

Is this the one screw that is used to attach the Sta-Rite light fixture to the pool?
 Reply

A  Answered on 5/17/2015 by InyoPools Product Specialist Lennox H.

Sta-Rite Light screw for P/N 05101-0004.
 Reply


?     Asked on 6/29/2015by Edgar T Gunnery

What size tool needed to remove face plate screw. ? Thank you
 Reply

A  Answered on 6/30/2015 by InyoPools Product Specialist Lennox H.

Hi Edgar, A Philips screwdriver is needed to remove the face plate screw.
 Reply


?     Asked on 7/18/2016by Himanshu

I have the screw, though missing the Gum O ring, can i find this at the hardware store? or have to get a whole screw with gum ring.
 Reply

A  Answered on 7/22/2016 by InyoPools Product Specialist Lennox H.

Hi Himanshu, You can check but I can't say for certain if you can find one at your local hardware store. You can purchase the Gum Washer (98208500) separately.
 Reply


?     Asked on 11/2/2016by SB

Looking for the screws that hold the housing in the light niche. Are these the ones?
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Scott W.

I would need to know which niche you have to know if those are the correct screws. Do you have a model or part number? If not, please attach a picture so I can identify what you have.
 Reply


?     Asked on 6/7/2019by DB

Have an American Products pool light (model # M559351) that is coming out of it's housing in the side of my gunite inground pool. In looking closer, it's missing the one screw on the outside. Do you know the dimensions of a replacement screw? Also, is American Products out of business or did it get bought by another company?
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Patrick P.

Hi DB, American Products was acquired by Pentair quite a few years back. Here is a link to the view Parts Breakdown for The Amerlite you will need key #4 which can be found here Amerilite Locking Screw and Gum Washer sometimes the threaded port that the locking screw screws into gets stripped and if this is the case you will need one of these Pool Light Wedges
 Reply


?     Asked on 8/24/2019by Donnie Broom

Does this screw supposed to have the gum washer or does it work without one?
 Reply

A  Answered on 8/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Donnie. This Screw does not require a gum washer. 
 Reply