I have an AO Smith motor with a broken switch. Model nbr C48K2N143C1C. Number on the broken part is 627953. Will your part work?
Reply
Yes this is the proper replacement switch for the AO Smith 627953 switch.
Reply
I have a 1 horsepower hayward super pool pump with an a.o. smith motor. I broke this plastic part while replacing a seal in the pump. I believe this is the part I need. Is this part used on a Hayward 1 horsepower super pump?
Reply
Hayward has used a few different motors on there 1 HP Super Pump over the years, however this switch does work on many motors including most of which were used on the 1 HP Super Pump. I would double check your measurements of your switch vs. the measurements we have here 2"DIA X 1-1/4" OVAL X 3-1/8"H and if they match up than I would feel relatively confident this part would work for you.
Reply
I accidentally broke this part on the back of my motor and now it will not work. If I replace this saw-25 will that take care of my motor issue?
Reply
Yes, if this switch has broken then that very well could be the reason that you motor is not working any longer. Replace then test.
Reply
Have a 1.5hp ao smith motor that hums when turned on when i hit the backof it with a board it will kick on will this solve my problem
Reply
Hi Matt, Usually a humming motor is due to a capacitor going bad. Here is a guide showing you How to Select the Correct Capacitor For Your Pool Motor which may be of help.
Reply
How could I tell if this part is bad?
Reply
Hi Carl, You can tell if the Stationary Switch is bad if with 15 seconds you do not hear a click that would indicate that the switch has been activated making contact with the governor.
Reply
I was surprised at all the broken switch questions that there are so many. I also have a broken switch. Will this sw fit on my model C48L2N134B1 serial no35507FM
Mike
Reply
Hi Mike, This Stationary Switch can be use with the C48L2N134B1 motor that you have.
Reply
I'm looking for a replacement part for the Switch #614239. Is this it?
Reply
Hi Carly, I'm not able to confirm if this switch is a replacement for p/n 614239. If you can provide use with the motor PART, CAT or MOD # I can confirm if this switch can be used with with motor.
Reply
I have a pump motor Model ST1102, not sure of the brand, serial 00612CH0317508. Will this switch fit my motor? Thank You
Reply
Hello Stan, for an ST1102 motor is an A.O. Smith part number 627957-003 - Start Switch - Old Style - Upto 7.5 Amps. We don't sell these on our site.
Reply
I'm looking for a replacement part for the Switch #614239 mod # C48L2FC4 Will this fit??
Reply
Hello, Tommy. The Switch, Stationary Single Speed (saw-25) - 629002-001 should be the correct replacement for the C48L2FC4 that cross references to the 1 HP Single Speed Motor - R1102ES. The Stationary Switches for the A.O. Smith motors normally have the same styles but can vary. If you need further assistance you may contact us at 1-877-372-6038 or email us at upload@inyopools.com.
Reply
Is the product in question exactly what we get if we order it.
Here in Quebec, when we ak for this item, we receive a totally different type of AO Smith switch, a SS-32.
Which is not compatable or acceptable to our client.
Reply
Yes, it comes as shown in the picture. One of our distributors is A.O. Smith so it will be that A.O. Smith switch.
Reply
Will this part fit my A.O. Smth motor 1 hp Mod #C48L2D85 Ser 8J90
Reply
Hi, Paul. Unfortunately, I was unable to locate any info on the motor by the MOD number provided. However, if you can send use a photo of the motor and the rear end of the motor we can confirm if this is the correct switch.
Reply
Switch, Stationary Single Speed / saw-(25) #629002-001 / Part #5270-64 A.O. Smith. Will this work on my 1.5 HP Century (A.O. Smith) Motor. Part #USQ1152 / Model #C48L2PA103A3 / Serial #SK04 / 230-115 volts / AMPS 19.2-9.6 / Single Phase Code J / Type UAC. I have pictures I could send also if you need them. Thanks, Steve - Sent 4-9-17
Reply
Hi, Steve D. Based on the parts list we have this switch will not work with the USQ1152 motor. If you can send us some photos we can confirm.
Reply
Will this work on MOD. K48L2N100A1 - 1081 Design - CT1102 ? The plastic housing looks different but the underneath view looks pretty much the same.
Thanks very much.
Reply
Yes, that stationary switch you work for your motor.
Reply
Looking for this switch (*looks* identical) I have a partial number off the tag. Here's what I've got:
A.O. Smith
SQ1202 E25022
MOD K48N2PA------- SER 13711FM
230v 2 HP
CCWPE PH 1 Code H
RPM 3450 FR 48Y hz 60
11.2 amps
Thank you!!!
Reply
Hi, Diane. Yes, this Stationary Switch will work with the Century SQ1202 motor.
Reply
I have a B2983T Century pump. I needed to replace the bearings and broke this switch in the process (actually there was short when I turned it on and it blew it in two but we can get to that) Right now it is running without the switch. What does the switch do and what is the correct part? Thanks
Reply
Hi, Tim. This Stationary Switch makes contact with the governor letting the motor know that the shaft is spinning. This Stationary Switch - 629002-001 is the correct one for the B2983T motor.
Reply
I have a A.O Smith QC1102 1HP. Will this Switch, Stationary Single Speed (saw-25) - 629002-001 work on my motor? The part number on the switch is 627953. Thank you.
Reply
Hi, John. Yes, this Single Speed Stationary Switch - 629002-001 will work with your QC1102 motor.
Reply
Hi, I have a Century SP3215Z1BE and need a single speed switch. Will the A.O. Smith part#5270-64 Work
Reply
Hi, Roger. Yes, this Stationary Switch - 629002-001 will work with the Century SP3215Z1BE motor.
Reply
Hi, I have an AO SMith motor Model C48D48D72. Will this start switch fit my motor? Thanks.
Reply
Hello, Can you please send a picture of the motor label? Nothing had come up with part number C48D48D72 on my end.
Reply
I have an AO Smith 1.5 HP Motor (USQ1152) 220 Volts AC (3450 RPM). Will the Century Stationary Switch for Motor RE #629002001work? Thanks, Steve
Reply
Hi Steve, unfortunately, we do not currently carry the stationary switch for the A.O. Smith motor model USQ1152 however the manufacturer part number for it is 627957-003 that may assist you in your search.
Reply
Hi please confirm if this switch will work on a 2hp AO Smith C48M2EC11C3. THANK YOU
Reply
Hello Francis. The Century Motors Switch, Stationary Single Speed, part number 629002-001 is compatible with the AO Smith motor model C48M2EC11C3.
Reply
Is this switch normally open when not installed and then makes contact after goverbor spins up?
Also will this work for a 1.5 HP Century C48C53AO6?
Reply
Hello Michael. The Century Motors Switch, Stationary Single Speed - 629002-001 is normally open and closes when engaged by the Governor. This switch is compatible with the Century Motors motor model C48C53A06.
Reply
will this operate in a ao smith pool pump Motor UST1152
Reply
Hello Bob. The Switch, Stationary Single Speed - 629002-001 is compatible with the A O Smith/Century Motor UST1152. Attached please find the Century / A.O Smith UST Series UST1152 exploded parts diagram for reference.
Reply
