I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
what does the (slip only) par of the description mean on the Valve Multiport Hi-flow Kit Wg for 261142.
https://secure.inyopools.com/Cart/ViewCart.aspx?utm_source=Barilliance&utm_campaign=EmailMyCartPopUp&clkeid=6760633&clkrid=4210&clkuid=694175196&clket=1
Reply
Jim, That means that the ports are not threaded. PVC pipe would be glued directly into the valve.
Reply
It is called a 2" but the valve that is on the side of my DE filter seems to ave a few different sizes of pipe going in and out ??
Reply
Hi, Jim. The actual plumbing could be different; however, at the valve, you will need a 2" pvc connection or adapter.
Reply
My filter and pump are piped with 2" PVC. I plan on reworking and replacing the valve and pump housing soon.Do I need a special type of 2"PVC pipe and glue or is the PVC from HomeDepot/Lowes sufficient ?
Reply
Hi, Jim. No special glue or pvc is required which can be purchased at your local hardware store.
Reply
Why can't a multipart valve be used with a Pentair cartridge filter
Reply
Certain Valves are made for Certain Filters. They will vary in size and pressure rating. So you cannot put any valve on any filter.
Reply
Can you just get the internal parts, not the whole case and pipes.
Reply
Hi Ray, Many people just replace the upper handle assembly which can be seen here Pentair Valve Upper Handle Assembly further detail of this part can be seen as Key #17 on the Pentair Valve Parts Diagram we would also suggest replacing your Pentair Valve Spider Gasket Key #10
Reply
Do you need to glue down the multiport spider gasket?
Reply
Gluing the spider gasket in place is not required. However, gluing it in does help keep the gasket in place. If you do glue it down, use an RTV Silicone. Do not use a standard glue.
Reply
I want replace my push pull valve with this one, but my FNS 60 filter has the outlet on top and inlet on the bottom. Will this still work?
Reply
Hello Mickey. The Pentair Pool Products Multiport Valve 261142 is compatible with Pentair DE Filters models FNS, FNS Plus and NSP.
Reply
