I lost the plug that holds the air in for the ring on top it is on the side of the pool will this work
Reply
Lisa, In the Intex Easy Set manual, this is listed as the STRAINER HOLE PLUG FOR 16' & BELOW AGP POOLS, but nothing is listed for the top ring. I would double check with Intex first.
Reply
Will these work in the place where the filter hoses would go if I were to not use the pump and want to plug the holes.
Reply
Hi Terri, The Intex Wall Plug Replacement Fittings (4554) can be used to plug the ports for the pump and return for the Intex Pools.
Reply
Will this work to winterize intake and outtake hole on a 24' x 52" metal frame Intext pool? Thanks
Reply
Hi, The Pool Plug Cap (4562) is the correct part that you will need according to the Intex 24' X 52" Metal Frame Pool Parts.
Reply
We have an 18' round intex pool, will these fit for winterizing where the hoses for inlet and outlet were when we remove the hoses and the pump?
Reply
Hi Kristi, The Intex Wall Plug Replacement Fittings (4554) can be used to plug the inlet and outlet for the Intex pools. I'm not sure if it can be used for winterizing. You can contact Intex at (800) 234-6839 to confirm.
Reply
I lost the screw on plug for the air intake for my pool, Intex model 57481. Will this item fit that or do you have something else I can use. Thanks.
Reply
Hi Alan, This wall plug will fit most Intex inflatable pool. I was not able to find model 57481 on their website to confirm.
Reply
I need a plug for intex plastic pool58484 size 120x72 I called intex and was told item number 11538
Reply
Unfortunately we do not carry this item from Intex. I checked on their website and was unable to locate it there as well.
Reply
I need to plug one of the two inlet holes in my 12 x 24 x 52 intex pool. Will these plugs work to plug the smaller holes in the side wall? Also do you carry the caps that secure the plug to the side wall both inside and outside? What would be the part numbers if you do carry them?
Thanks
Reply
Hi Ray, The Intex Wall Plug Replacement Fittings (4554) can be used to plug the inlet and outlet for the Intex pools. The smaller plug portion is about 1-1/4" outside diameter. The large section designed to hold the plug in place is 2-1/4" diameter. You can contact Intex at (800) 234-6839 to confirm.
Reply
We have an old inflatable pool, 2000 Sportsstuff Watertank and we have misplaced the cap to hold the air in after we inflate the pool. I cannot find the replacement part anywhere. Do you have something that would work? Tracy
Reply
Tracy, Unfortunately, we do not any parts that would fit a Sportsstuf Watertank. I would recommend reaching out to the manufacturer directly.
Reply
I was looking for plugs for an inflatable pool to hold in the air (we inherited the pool with 2 missing plugs) and saw your question. Did you ever find plugs for your pool as it sounded like you needed the same as mine? Thank you
Reply
How does this item work? I'm assuming you screw it onto the main sidewall attachment that is used to hold hose and handles in place. I'm using it for winterizing intex 21' round pool. Thx
Reply
Hi. This plug is inserted into the black filter pump outlet which is done from the inside of the pool so that water will not run out.
Reply
I have a 22'x52" Intex Pool. I want to plug and cap the second port in the wall where water comes in from the pool. Which parts do I need to do this?
Reply
Hi. Unfortunately, we do not have a plug that you can use with an Intex 22' x 52" pool. This plug is used with their smaller pools 16' or under.
Reply
Do you carry a replacement air plug for Intex model# 58480NP? This is the hole used to inflate the pool.
Reply
Hi, Chris. I was not able to locate a specific plug for your Intex pool. However, this Plug can be used.
Reply
what type of plugs do i need for my 27" round intex above ground pool? would these work? I Have already drained my water below the outlet but need to cover the other two inlets so i can cover my pool
Reply
Hi, Natalie. I will need to what style Intex Pool you have. Please provide pictures if possible.
Reply
