What is included with this pump system?
Reply
The following accessories are included: 3 Connecting nuts (1/4" or 3/8"); 3 Ferrules w/ 1/4" & 6 mm OR 2 ferrules w/ 3/8"; 1 Injection check valve (100 psi) OR (1) injection fitting (25 psi); 1 Weighted strainer; 1 20' Roll of suction/discharge tubing 1/4" or 3/8" white or UV black OR Europe 6 mm white; 1 Spare pump tube; 1 Mounting bracket; 1 Installation and maintenance manual
Reply
Can this pump be used to deliver liquid chlorine to my pool? I would like to make sure that the pump tubing and pump head can tolerate non-diluted liquid chlorine.
Reply
The S1G85MJL1A2S Stenner Pump w/ 15 Gal. Gray Tank System can be used with liquid chlorine if the strength of the sodium hypochlorite is less than 15%. You would have to check with the supplier of the sodium hypochlorite to find out the strength.
Reply
Can this pump w/ tank system work standalone? I have Auto Pilot nano salt water chlorination and need to feed acid to lower PH. I do not have any type of pool automation or controls. thanks.
Reply
Hello Fabio- To use the Stenner Pump w/ 15 Gal. Gray Tank System - S1G85MJL1A2S you will need at the very least a Chemistry Kit 1, pH and ORP Sense, ORP Dispense - AQLCHEM.
Reply
I see the parts list in above post but am a little confused. I am trying to plumb this into my existing 2 inch pvc plumbing that is going into pool. Are the parts needed for that included, as I do not see any type of saddle clamp or seals for which to use to plumb in the tubing?
Reply
Hi, Joe. This system includes the pump pre-mounted, along with accessories (connections) for an initial standalone application. It does not include saddle clamps but the injector fitting assembly. You can reference the Installation Instructions and Spec Sheet.
Reply
I have already submitted a question about 4 days ago but did not receive any type of reply. I see where there is a parts description about the fittings that come with this but I do not see any type of saddle clamp or seals that seems like would be needed to plumb into my existing 2 1/2 inch pvc plumbing? Please advise if the included parts will allow to plumb straight into my existing pvc plumbing?
Reply
Hi, Joe. This system includes the pump pre-mounted, along with accessories (connections) for an initial standalone application.
Reply
The parts description listed in one of the questions describes 1/4" OR 3/8" tubing and nuts/ferrules? Also, it is not specified as to whether the tubing will be clear or UV Black? Please specify EXACTLY the parts that come with this before I order and spend this kind of money. Thank you.
Reply
Hi Joe, Sorry for the confusion on the product description. This system will come with 1/4" UV Black Tubing made out of Santoprene. The nuts/ferrules are included.
Reply
I will be removing my Rainbow Chlorinator 320. Is that where the Stenner tube gets installed? Are necessary fittings included with the pump and tank? Lastly, what is the rate of chlorine dispensed? (GPD)
Reply
Hi, Andy. Yes. This system will be installed as the last piece of equipment on the return side. This unit can dispense 0.3-5.0 gallons of chlorine per day.
Reply
Eexactly how does the feed tube from stenner connects into the chlorinator manifold? Is there a diagram showing the connection? What spare parts are recommended with the unit. Thanks
Reply
Hi, Andy. It will not connect into the chlorinator manifold. See the Stenner STS Tank & Pump System Installation Instructions for details.
Reply
I want to use this pump as an acid injection system for my pool. Can I wire it directly to my Pentair Easytouch control panel so I can utilize the Easytouch scheduling?
Reply
