no question--I had sent questions already and sent pics and was told this was the correct one. Thanks to all.
Reply
Thanks so much for the kind words, we are glad we could track down these parts for you.
Reply
I am looking to replace all the top rails on my seaspray allure. It is 18' x 33' x 52". I would like resin if available. Can you supply them? The pool was installed in 2010.
Reply
Hi Jeffrey, Unfortunately, We do not have resin top rails that will fit the Allure 18' x 33' x 52" pool. Click link > Allure 18'x33' Oval (Steel Top Rail, Steel Upright) Parts for available parts.
Reply
is this rail available in 41 1/4" length? I need some for a 12' x 24' oval. They look exactly like these just shorter
Reply
Hi, We have several Top Rails that is 41-1/4" long. We will need to know that make and model of your pool in order to locate the correct top rail. You can also send photos of the pool wall, upright, top caps along with the pool size to upload@inyopools.com so we can try to identify your pool.
Reply
I found this part on your website, I am certain they are correct. Key 149, Part # 19922 Allure Top Rail. 52 7/8" long and 6 1/2; wide. All the measurement are exactly as what I have. I need 8 but was thinking of ordering all 17. However I may order just 1 to make sure of the fit. could you offer an discount if I were to buy all new?
Reply
Hello, I apologize, but these only come in single units and there are no discounts on this part number 19922 for Top Rail.
Reply
Do the caps and screws come with the rail? If not, which caps would fit the top rail with part # 19922?
Reply
Hello, I apologize, but these rails go with several different pools, if you could send pictures and measurements of the part needed to upload@inyopools.com
Reply
Do the caps and screws come with the rail? If not, which caps would fit the top rail with part # 19922?
Reply
Hello, I apologize, but these rails go with several different pools, if you could send pictures and measurements of the part needed to upload@inyopools.com
Reply
The listing for PN 19922 states the top rail is for Allure Seaspray 24' & 27' pools. I have a 21' Seaspray. Can you tell me if 19922 will work or if not, what part number should I be looking for?
Reply
Hello Joe - The 21' Seaspray Allure would require the 19921 top rail.
Reply
i need a 52 inch top ledge rail for a 27 ft round pool. it is 8 in wide. the only part number i have are the cap numbers which are 26990 26991
Reply
Hello Henry - Could you email us a picture of the outside pool wall (top to bottom), a picture of where the top rail meets the upright and a picture of the top cap? Include the size of the pool and what you need in the email. You can email upload@inyopools.com
Reply
This part will fit a sea spray allure 24’ round?
Thanks
Reply
Hi, Michele. Yes, based on the info I've gathered. However, to confirm please send us pictures of the Pool Wall, Uprights, Top Rails and Top Rail.
Reply
It's a 27' round. Bought from Blueworld pools in 2014. It is called "classic" . I need the top rails (seats). Some are rusted. I have uploaded pictures. Do you carry them. Thank you
Reply
Hello, Can you please send pictures of your above ground to identify it for you? The e-mail address is agparts@inyopools.comWe will need pictures of the wall,top cap,up right, and the top railing.
Reply
27' round. Bought from Blueworld pools, 2015. Called "classic" I need some top rails. I have uploaded pictures. Do you carry them? Thank you.
Reply
Hello, Can you please send pictures of your above ground to identify it for you? The e-mail address is agparts@inyopools.comWe will need pictures of the wall,top cap,up right, and the top railing.
Reply
I need 17 top rails,19922. Is there a price break for multiple pieces?
Reply
Hello Robert, we do have a discounted rate for the 4 packs under part number 19922-PACK4.
Reply
