$23.99

Qty:

By Aladdin


Details

Top

Part # 4202-10

Manufacturer Code 25141-440-000

Dimensions 8-3/8" W x 5-1/4" H x 1-1/8" D

Alternate Part #'s 08650-0022, 20-0010-1, 240067, 25141-440-000, 8650-0022, 938, R240067, SPX1070KHR, 51-555-1040, CMP25141-440-000, CMP25141440000, CTM-251-1210

Product Description

This universal replacement weir is spring loaded. This spring is compressed inside the weir with a plastic line retaining the spring in place. Do not pull plastic line until weir is in place. This package does include foam.

Applicable Models:

  • Swimquip U3 Skimmer
  • Hayward SP1070 Series Skimmer

Dimensions:

8-3/8" W x 5-1/4" H x 1-1/8" D

Product Specifications

Width:
8-3/8 in.
Length:
8 - 3/8 in.
Thickness:
1 - 1/8 in.
Height:
5-1/8 in.
Manufacturer:
Sta-Rite (Swimquip)
Top

?     Asked on 5/28/2009by Guest

I have the standard Kafko weir that snaps onto u-shaped holders on the skimmer. The door keeps popping off. I ordered the 4202-10 Universal Spring Loaded, however the diameter of the rounded part of the weir that snaps into the u-shaped holder was ¾”; the size of the u-shape holders on the skimmer will hold ½”. Do you carry this same weir with a rounded part that fits into the u-shape holder that measures ½”?
 Reply

A  Answered on 5/28/2009 by InyoPools Product Specialist Patrick P.

It appears the skimmer has already or was made originally with the weir that requires a plastic rod. You can either remove the blocks from the inside of the wall of the skimmer and install the spring loaded weir shipped, or order the weir conversion 4070-09 and you won’t need the glue or the blocks to glue to the wall. If you still have the rod order you can order 4070-06 weir without rod. The Kafko company now uses Hayward skimmers!
 Reply


?     Asked on 5/25/2012by Guest

Part 1 - What is the difference between the 3 Kafko Equator weir doors you carry? There seems to be a lot of questions around this topic. (Continues Above)
 Reply

A  Answered on 5/25/2012 by InyoPools Product Specialist Patrick P.

The history of the Kafko Equator Skimmer. The 4070-09 is the complete weir replacement kit, It’s called a conversion kit, but it’s a complete replacement. There have been 2 versions of this kit the original version which is no longer available included a weir, a weir rod, and 2 rectangular pieces of plastic with a small round hole in each. The rectangular pieces of plastic were glued to the sides of the skimmer mouth with rubber cement, the weir rod was then inserted into each round hole to keep it in place and the rod was inserted through the hole in the weir to keep it in place. The current version of the conversion kit part # 4070-09 uses the same weir but in this version (2010 and later) the rectangular plastic pieces each have a short circular male extension, the extensions are the same diameter as the original weir rod, which is no longer used.
 Reply


?     Asked on 5/26/2012by Guest

Part 2 - What is the difference between the 3 Kafko Equator weir doors you carry? There seems to be a lot of questions around this topic. (Continues Below)
 Reply

A  Answered on 5/26/2012 by InyoPools Product Specialist Patrick P.

Continuation of post below - The 4070-06 is the original weir by itself. The 4202-10 is a universal weir which is spring loaded. You put the weir in place and pull the tabs and the spring loaded rods pop out to hold the weir in place, this one is my choice. Either way, 4070-09 or 4202-10 will work, and the small rectangular pieces will need to be removed from the skimmer first.
 Reply


?     Asked on 6/19/2016by Joe

Will this weir work on an old Hayward SP1070 skimmer? The original weir was SP1070-K and after a remodel cannot get the old bracket out.
 Reply

A  Answered on 6/24/2016 by InyoPools Product Specialist Lennox H.

Hi Joe, This SwimQuip Weir can be used to replace the Hayward Weir SPX1070KHR.
 Reply


?     Asked on 3/31/2019by Will

I have the 8 1/4" http://www.inyopools.com/Products/07501352028765.htm#reviews I am on my second door and it falls off. Worried about spending another $30 or so for a door for it to just fall off as well. Not sure if it will or not. I see spring loaded options but I am not sure how they work or if they will work with my setup. Any advice is welcome. Thanks
 Reply

A  Answered on 3/31/2019 by InyoPools Product Specialist Lennox H.

Hi, Will. The Weir, Universal Spring Loaded 8-3/8" - 25141-440-000 will work as a replacement for the Kafko / Equator Skimmer. It has built-in spring-loaded swivel hinges that locks into place allowing the weir to operate.
 Reply

  • Commented on 3/31/2019 by Product Owner

    I don’t understand what it locks into. There are just the two u shaped connectors on the bottom of the skimmer that the flapper snaps into. What do the spring loaded pierced attach to?
     Reply

    • Commented on 3/31/2019 by InyoPools Product Specialist Lennox H.

      WW, The weir will use the skimmer body to keep it in place.  
       Reply

      • Commented on 7/30/2019 by Product Owner

        Do the spring pins push out to the skimmer wall to provide a friction fit?
         Reply

      • Commented on 3/31/2019 by Product Owner

        Thanks
         Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

2     0

Pool did not have a weir gate

Written on 7/2/2020 by Guest

When we moved to our new house, the pool didn’t have a weir gate or jets in the deep end of the pool. I measured the skimmer and purchased the spring-loaded weir gate. Once it arrived, I installed it and now there is water movement in the deep end of the pool and any debris that finds its way into the skimmer stays there - thank you, weir gate!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.6  out of 5 stars)
5 Rating
5 star:
 
(3)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews