Shaft Seal PS-201V, 3/4" Shaft Size (PS-201V-CMS)

$27.99

IN STOCK
FREE SHIPPING

Part # 35-423-1096

  4.5 Average  

Details

Top

Part # 35-423-1096

Manufacturer Code PS-201V-CMS

Dimensions 2.5" L x 2.5" W x 4.5" D

Alternate Part #'s 15693, 354001, PS-201, PS-3868, PS201, PS3868

Product Description

THIS IS AN EXTRA HEAVY DUTY SHAFT SEAL
THIS IS MADE WITH A CARBON GRAPHITE, STAINLESS STEEL
AND VITON RUBBER
THIS IS THE LONGEST LASTING SEAL AVAILABLE AND IS DESIGNED
FOR USE WITH OZONATORS AND SALT CHLORINE GENERATORS AS WELL AS REGULAR POOL AND SPA USE

Top

?     Asked on 2/27/2019 by Evgeniy

hello. Which shaft seals for pumps? we have an aggressive environment (sea water, chlorine, ozonation) 5P6R6G3-212 5P6R6F3-211 5P6R6E3-210 5P6R5D3-209 PENTAIR EQK500
 Reply

A  Answered on 2/27/2019 by InyoPools Product Specialist Lennox H.

Hi, Evgeniy. This PS-201V-CMS - Shaft Seal will work with the 5P6R6G3-212, 5P6R6F3-211, 5P6R6E3-210, and 5P6R5D3-209 model pumps and the PS-1909 for the EQK500 model pump. 
 Reply


?     Asked on 6/4/2016 by Marc

I have a Starite P6E6E-206L Max E Pro standard. I am buying a ECM16SQU replacement motor and GOKIT 79 seal kit. The seal kit includes a shaft seal, but I have a salt chlorination system, so how important is it that I buy an additional generic, heavy duty shaft seal because of salt system? Do I need any other parts to make this new motor work on my Max E Pro? Thanks.
 Reply

A  Answered on 6/10/2016 by InyoPools Product Specialist Lennox H.

Hi Marc, The saltwater shaft is not extremely important it will just offer you more protection. Aside from the Tune Up Kit you do not need any other parts if the impeller, diffuser etc is in good condition.
 Reply


?     Asked on 1/25/2012 by Guest

How do I change the shaft seal on my pool pump?
 Reply

A  Answered on 1/25/2012 by InyoPools Product Specialist Patrick P.

Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Old motor needed replacing.

Written on 5/16/2018 by Guest

After taking impellor housing apart all I had to do was pop out the old shaft seal and bearing and install new. Took maybe 20 minutes. The old seal is merely pushed into the plastic shaft hole. The old shaft bearing was the easiest. Grab ahold of it and just pull

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
6 Rating
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(1)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews