1. Home
  2. Pool Parts
  3. Pool Pump Parts
  4. Hayward MaxFlo XE Pool Pump
  5. GOKIT1SALT

By PureLine

Details

Top

Part # GOKIT1SALT

Product Description

Standard tune up kit for the Hayward Max-Flo pump includes the shaft seal and all o-rings, gaskets and lubricant.

We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor.  If you use your old shaft seal, it will not mate up properly with the new motor and may leak.

This Tune Up Kit Works on These Pumps:

  • All Hayward MaxFlo Pumps 1/2 HP - 3 HP single and dual speed models.
  • This tune up kit does not work with the MaxFlo II Pump

Tune Up Kit Includes:

  • Diffuser Gasket
  • Pump Lid O-Ring
  • Housing Gasket
  • Motor Shaft Seal
  • Lubricant

For More Pool Pump Motors

Top
Ask A Question

?     Asked on 7/20/2016by Ed McDonnell

What is the difference (besides price) between GOKIT1 and GOKIT1SALT (tune up kits for Hayward Max Flo)? What makes one suitable for salt pools and the other not?
 Reply

A  Answered on 7/20/2016 by InyoPools Product Specialist Alan M.

Yes, you are correct, the salt version is more resistant and has a better quality pump seal recommended for salt pools.
 Reply


?     Asked on 3/23/2017by John

Will gokit1salt work on a pump Model #MP2607x10 Serial #21121310002029012? I am replacing motor with a UST1102.Yes I do have a salt pool.
 Reply

A  Answered on 3/24/2017 by InyoPools Product Specialist Lennox H.

Hi, John. The model number provided is not correct. If you have model # SP2607X10 you will need p/n GOKIT3SALT along with the UST1102 motor.
 Reply


?     Asked on 3/13/2018by pswitz

What is the difference between the CT 1102 and UCT 1152 pump motors? Are these the replacements for Hayward Super Pump II motors? I have the round trap basket which go kit will i need? only 2 wires to the motor does it matter which is which for the power?
 Reply

A  Answered on 3/14/2018 by InyoPools Product Specialist Lennox H.

Hi, Pswitz. The difference between the CT1102 and the UCT1152 are the Total HP (THP), the amp rating and the internal design of the motors. These motors are interchangeable and will fit the Hayward Super II Pump. You will need to get the Hayward Super Ii Pump Tune Up Kit - GOKIT2 or GOKIT2SALT. You can follow the steps in our How To Wire A Pool Pump Motor and also use the wiring diagram located on the motor for wiring instructions based on whether the motor will be wired for  115 or 230 volts.  
 Reply