PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
By Hayward Pool Products
Model # AQLCOLORMODLV
Alternate Part #'s AQL-COLOR-MODHV
ColorLogic LED Communication Module, Low Voltage 12v.
The ColorLogic Network Module is used with the Pro Logic to fully control the color, speed, motion and brightness of pre-set light shows in a compatible Hayward ColorLogic pool/spa light(s). After installing the ColorLogic Network Module and enabling the function in the Pro Logic, the user can program various parameters to fully customize their pool/spa light(s) operation.
The ColorLogic Network Module can be used to control up to 32 pool or spa lights simultaneously. This method of control features 2 user defined programs; five fixed colors and eleven color-changing shows. All fixed colors and shows can be modified or changed. The factory set colors and shows are listed in the Program Table below and can also be found on the color laminated card included with the Network Module. A color chart can be found on the same card and will help when programming colors for the ColorLogic lights.
The AQL-COLOR-MODLV is compatible with all Goldline Controls Pro Logic PS controls operating with software version 4.00 or greater and whose enclosures provide a cutout for installation.
What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
Do i just need the light and my current prologic controller which runs my pool filter and spa etc.. or do i have to have a separate controller for the colorlogic led pool light?
Reply
You can use just the ProLogic to control the ColorLogic light but you will only be using a fraction of the overall control capabilities. To get the complete control capabilities you would need to order the ColorLogic Gen. 4.0 light here http://www.inyopools.com/lights_colorlogic.aspx along with the ColorLogic Communication Module here http://www.inyopools.com/Products/02200000040136.htmWhen using the ColorLogic Communication Module with the ProLogic the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement.
Reply
What is the difference between this and the 120v version. Does it come with the signal coupler for the transformer?
Reply
Hi. The voltage capacity is the difference. The Coupler - LKBUN1000 is not included.
Reply
