Part # S166T92S
Power-Flo Matrix Above-Ground Pump With Pro Series Sand Filter
The Big news in above-ground pumps is the PowerFlo Matrix by Hayward. It features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance. The high-quality Noryl impeller offers wide openings to prevent leaf and debris clog. While this pump is impressively equipped, the PowerFlo Matrix is also very efficient. It has a heat-resistant, double-size seal and a protected rear-mounted switch for high-energy efficiency. Plus, its heavy-duty, high-performance motor provides years of trouble-free operation thanks to an integrated automatic thermal overload protector. PowerFlow Matrix clearly the superior choice in above-ground-pool pumps.
The Power-Flo Matrix has been engineered as a uniquely superior above-ground pool pump. With a single push of a button, this truly versatile pump changes from a veritical to a horizontal discharge and back again. Its large profile and integrated styling makes the Power-Flo Matrix a swimming pool pump like no other.
Pro Series sand systems are designed and equipped to offer the ideal combination of energy efficiency and outstanding water clarity. A broad selection of filter sizes, pumps, and accessories allows you to choose and merchandise the system(s) that best suit your above-ground pool program.
Click here for more Hayward Pump and Filter
Hello I have a 17' round above ground pool, just under 7,000 gallons. Is the Hayward S166T92S 16" sand filter system sufficient, or do I need to go up to the S180T92S 18" system? Thank you!!
This pump filter system is more than enough for that size of a swimming pool.
Can I get this with a salt system?
Hi Karen, Sure, you can use this pump and filter in conjunction with a salt system.
Hi, I have a 12x24 x 54" deep hard wall oval pool.I need to replace sand filter & pump.Is this item suffecient? I previously had a 1.5 dual speed pump.Can I filter & vaccuum w/a 1hp? Or would I need a dual speed 1hp ? Was told the 1.5 pump was reason I had sand in pool.Any help or steering me in right direction is much appreciated.
Is the S166T92S good enough for a 12' wide x 24' long pool?
Kyle, Yes, the S166T92S is good for a 12'x24' above ground pool.
Will Hayward S166T92S be adequate for a 30 ft round above ground pool?
Hi, Lrraine. I would recommend the S210T93S unit.
Does this system come with the hose?
This system comes with the hose connections between the pump to filter.
How much media do I put in my SW166 TPAKS sand filter
The S166T or the the SW166T will take 100 lbs. of sand.
Do you give Military discount
We offer a $10 reward code for military, BECBJAGVZ.
What system would you recommend for above ground 21000 gals pool
For a pool with 21000 gallons you will want the 18in sand filter, the pump/filter combo is part number S180T92S.
my pool is 28cubic meter. is this the right system for it
Yes, that system would do great for your 7400 gallon pool.
Does this unit come with a cord and plug for the motor? Do you have a video showing how to remove the old filter and replace it with the new?
Hello Gene, S166T92S Hayward Pump and Filter unit doesn't come with a cord, you would use your previous cord. Unfortunately, we don't have a how to guide on replacing the cord.
Is this pump large enough for 24 foot diameter pool?
Yes this system is sufficient for a 24 ft. round above ground pool.
I just pulled out my hayward s166t92s the valve on top of the sand filter has six positions plus "winter" . My sticker is torn almost off. I know where the backwash setting is. Could u tell me the settings that follow "Backwash" in a clockwise direction? I have Backwash , blank, blank ,blank, waste ,"winter" , closed .
Bobby, Take a look at the images for the Hayward SP0714T valve. We have an image of the valve setting that will help.
How often do I have to replace the sand in my filter? What is normal operating pressure?
On a "fresh start-up" a filter would operate anywhere between 10-20 psi. As a general rule of thumb you only want to backwash when the pressure increases 8-10 psi. You want to make certain that the pump is being turned off whenever you move the handle on the valve. Once backwashing is complete (3-5 minutes), you can switch to the rinse option to re-settle the sand bed. Sand will typically last 5-7 years. Premature backwashing will wear down the size of the sand which will cause difficulties such as cloudy water and higher operating pressures.
When should I change the sand in my filter?
You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
What is the voltage on this unit? How long is the manufactures warranty? If the system requires repairs during warranty, what do I do?
This pump runs on 115V power. This unit comes with a 1 year manufacturer's warranty. If the pump needed repair, you would call Hayward directly and they would put you in touch with a warranty service station in your area.