$739.00

Qty:

By Hayward Pool Products


Details

Top

Model # W3S180T92S

Alternate Part #'s HAYW3S180T92S, HPPW3S180T92S

Product Description

Power-Flo Matrix Above-Ground Pump With Pro Series Sand Filter


The Big news in above-ground pumps is the PowerFlo Matrix by Hayward. It features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance. The high-quality Noryl impeller offers wide openings to prevent leaf and debris clog. While this pump is impressively equipped, the PowerFlo Matrix is also very efficient. It has a heat-resistant, double-size seal and a protected rear-mounted switch for high-energy efficiency. Plus, its heavy-duty, high-performance motor provides years of trouble-free operation thanks to an integrated automatic thermal overload protector. PowerFlow Matrix clearly the superior choice in above-ground-pool pumps.



The Power-Flo Matrix has been engineered as a uniquely superior above-ground pool pump. With a single push of a button, this truly versatile pump changes from a veritical to a horizontal discharge and back again. Its large profile and integrated styling makes the Power-Flo Matrix a swimming pool pump like no other.

Pro Series sand systems are designed and equipped to offer the ideal combination of energy efficiency and outstanding water clarity. A broad selection of filter sizes, pumps, and accessories allows you to choose and merchandise the system(s) that best suit your above-ground pool program.

System Features:

  • Systems are designed for quick assembly and precise alignment of components
  • Pumps and filters are performance-matched to provide maximum flow and energy efficiency
  • Filter bases are molded of rugged ABS for long lasting, all-weather performance
  • 6 position PermaGlass XL™ Vari-Flo™ valve provides maximum flow at low pressure drop.
  • All models are one carton systems and UPS shippable up to the 16" systems

Click here for more Hayward Pump and Filter

Product Specifications

HP:
1.0 HP
Filter Type:
Sand
Tank Diameter:
18 in.
Cord Type:
Standard
Pump Model:
Hayward Matrix 1 HP Pump
Speed:
Single
Manufacturer:
Hayward
Pool Type:
Above Ground
Filtration Area:
1.75 sq. ft.
Flow Rating:
35 GPM
Top

?     Asked on 6/8/2006by Guest

How much sand is needed for this filter?
 Reply

A  Answered on 6/8/2006 by InyoPools Product Specialist Patrick P.

150 lbs.
 Reply


?     Asked on 7/4/2006by Guest

What is the voltage on this unit? How long is the manufactures warranty? If the system requires repairs during warranty, what do I do?
 Reply

A  Answered on 7/4/2006 by InyoPools Product Specialist Patrick P.

This pump runs on 115V power. This unit comes with a 1 year manufacturer's warranty. If the pump needed repair, you would call Hayward directly and they would put you in touch with a warranty service station in your area.
 Reply


?     Asked on 9/24/2006by Guest

What is the flow rating for this filter? Are the connections 1 1/2" or 2" and is it a 2 speed pump?
 Reply

A  Answered on 9/24/2006 by InyoPools Product Specialist Patrick P.

The designed flow rating for the S180T filter is 35 GPM the pump and filter both have 1.5" connections and this is a single speed pump 
 Reply


?     Asked on 1/27/2012by Guest

When should I change the sand in my filter?
 Reply

A  Answered on 1/27/2012 by InyoPools Product Specialist Patrick P.

You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
 Reply


?     Asked on 3/1/2012by Guest

How often do I have to replace the sand in my filter? What is normal operating pressure?
 Reply

A  Answered on 3/1/2012 by InyoPools Product Specialist Patrick P.

On a "fresh start-up" a filter would operate anywhere between 10-20 psi. As a general rule of thumb you only want to backwash when the pressure increases 8-10 psi. You want to make certain that the pump is being turned off whenever you move the handle on the valve. Once backwashing is complete (3-5 minutes), you can switch to the rinse option to re-settle the sand bed. Sand will typically last 5-7 years. Premature backwashing will wear down the size of the sand which will cause difficulties such as cloudy water and higher operating pressures.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)