Part # S210T93S
Power-Flo Matrix Above-Ground Pump With Pro Series Sand Filter
The Big news in above-ground pumps is the PowerFlo Matrix by Hayward. It features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance. The high-quality Noryl impeller offers wide openings to prevent leaf and debris clog. While this pump is impressively equipped, the PowerFlo Matrix is also very efficient. It has a heat-resistant, double-size seal and a protected rear-mounted switch for high-energy efficiency. Plus, its heavy-duty, high-performance motor provides years of trouble-free operation thanks to an integrated automatic thermal overload protector. PowerFlow Matrix clearly the superior choice in above-ground-pool pumps.
The Power-Flo Matrix has been engineered as a uniquely superior above-ground pool pump. With a single push of a button, this truly versatile pump changes from a veritical to a horizontal discharge and back again. Its large profile and integrated styling makes the Power-Flo Matrix a swimming pool pump like no other.
Pro Series sand systems are designed and equipped to offer the ideal combination of energy efficiency and outstanding water clarity. A broad selection of filter sizes, pumps, and accessories allows you to choose and merchandise the system(s) that best suit your above-ground pool program.
Click here for more Hayward Pump and Filter
My filter keeps going off. Runs about 10 minutes and shuts off. What could cause this? It just started doing it.
Hi, Raeh Ann. The motor could be overheating. Check out our Why Is My Motor Running Hot? and How To Troubleshoot a Pool Pump Motor - Motor Overheated guides for more info and troubleshooting tips.
Does this come with all parts necessary to hook up the filter or are additional parts needed. Also, is the sand ordered seperately? I have a 12 x 24 Kayak pool that is 48 inches deep.
Hi Melissa, This does come with all of the hoses and fittings necessary for installation. The sand is purchased separately.
How much sand do I need for a Hayward Sand Filter model 711?
Hello Lynn - The 711 number is the number of the filter valve. That valve is used on several filters. In order to recommend the correct amount of sand, we'll need to know the make and model of the filter. The model of the filter should be on the side of the tank on the filter label.
I have a 33 ft round above ground pool. The wall is 54", I have dug out about a 26 diameter circle where they pool is about 72". I have figured the gallons are around 33,000. I'm trying to find out what size sand filter and pump I need.
Hi Michelle, this Hayward S210T Filter with 1.5 HP Matrix Pump would be the proper pump and filter system for your 33' round above ground pool.
Hi i have a hayward power flo matrix sp550072 how much sand do i need my pool is 24x52
The Hayward S210T requires 200 pounds of sand.
Hi my s21ot does not have the sticker for filter backwash ext.. Just from playing with it.I face the back of the Handel away from the pressure have it dumps out water. I rotate it to back of Handel is on top of pressure have no water dumping out and it does it thing. On pictures I seen the filter is by the pressure have and back wash opposite direction is there something wrong with my valve?
Hi, Jason. From you description it does not seem like there is an issue with your valve. You just need to replace the decal p/n SPX0714G.
I have a 33' above ground pool. I need a pump/sand filter combination. Which do you recommend?
Hi, This pump and filter combination is sufficient for a 33' above ground pool especially if the equipment would be station within 4 feet of the pool.
Hello, I have a 33 ft round pool (above ground) ...52 inches deep. My DE system is failing and is very high maintenence so I'm looking for a sand filter. The electrical is set-up 220 volt. I'm also using Baquacil.....what would you reccoment for a pool system?
Hello Brian Hayward S210T Filter w/ 1.5 HP Matrix Pump would be fine in your 33 round pool.
I have a 13,000 gallon above ground pool with a Hayward S210T sand filter. How many horse pump do I need?
Hi Randy, A 1 hp pump can provide adequate water circulation for a 13,000 above ground pool. A 1.5 hp pump is more than you need but will do the job plus some.
I looking for a side motor to go with my filter cartridge system. My motor has to be on the side for my cartridge to work with the pump.
Hi Char, The Hayward Matrix Pool Pumps discharge can be rotated for horizontal applications.
What is the current draw(amps)
The amp draw on the Hayward Matrix 1.5 HP is 15 amps.
How much sand do I need for my S210T93S system?
Hello Greg, The S210T filter will hold 200 lbs of filter sand.
I've purchased S210T93S what type of sand and how much do I need.
You would require #20 Silica Sand.
I am currently using a cartridge filter and want to change to sand. I have a 3/4 hp pump. Probably borderline. I want to know what is the minimum size I should go with and should I go with a 1 hp or 1 1/2 hp. I know bigger is better but I don't want to over do it. I have approx 12,500 gallons , and I do fight algae somewhat. From what I hear the sand is much easier to deal with
Hi Richard as long as your pool is an above ground pool then for a 12,000 gallon pool I would recommend a Jacuzzi 19" Sand Filter W/ 1 HP Pump I agree that sand is pretty easy to maintain.
I have a 28' round above ground pool would this pump/filter work for that size pool?
Hello, Wendy. The S210T93S Hayward S210T Filter w/ 1.5 HP Matrix Pump is a great fit for a 28'-Round Above Ground swimming pool. It offers a turnover rate of 21,120 gallons in 8 hours and 26,400 gallons in 10 hours.
I need to replace my pool pump and filter for an above ground pool. I know it is a Hayward pump (1.5HP) and sand filter that requires 150LBS of sand. Serial # on the sand filter is 0518185070165M. I see that you have different size and filters. One for 150lbs and 250lbs. Which pump and sand filter should I replace it with?
Hi, A bigger filter is always better so I would recommend this unit. The S210T filter requires 200 lbs of sand not 250 lbs.
This is referred to as an "above ground pool" filter system. I have a 16 x 32 in ground "sports" pool. (approx. 18,000 gal) It currently has an s210t system that I'm replacing. It has worked fine for years, but the tank has split and the multi port valve is leaking. Why does this say "above ground pool" system?
This is referred to as an above ground pool system because the Hayward Matrix pump is specifically designed for above ground pools. The filter can be used on either but not the pump hence making it fit for an above ground pool.
I can't get the top off the pump basket off. Is there a trick to this. The O ring has been greased and I can't get it to budge. Thanks for any advice.
Tom, Try using a large strap wrench to twist it off. Then clean the O-ring grooves and replace the old O-ring with a new one - lubricate.
What is the maximum size pool that this pump and filter would work with? I have a 15x25 oval and want to make sure that this would work well. thanks
Hi Dan, this system would be more than adequate for 15' x 25' aboveground pool. This filter system could handle up to a 21' x 43' oval aboveground pool.
When should I change the sand in my filter?
You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
what size hoses does this take and does it comes with hoses, clamps? does it include everything to just hook up to the pool? also, is this a 21" sand filter and how much sand does it take??
Yes this comes with all the hoses and clamps needed to just hook up, the hoses are 1.5". This is a 21" sand filter which requires 250 Lbs. of sand.
What is the voltage on this unit? How long is the manufactures warranty? If the system requires repairs during warranty, what do I do?
This pump runs on 115V power. This unit comes with a 1 year manufacturer's warranty. If the pump needed repair, you would call Hayward directly and they would put you in touch with a warranty service station in your area.
(5 out of 5 stars) Great Swimming Pool Cleaner
Reviewed By: Steve from McDonough GA ()
Pros: Valve system. Powerful motor
Cons: The set up instructions were vague. Only a 1 speed motor
Excellent system. My pool is crystal clear and the motor is quiet and powerful. I was able to change my system from a cartrridge filter to my new sand filter system in about 1 hr. I love the ease of turning the valve to back wash the system instead of the time consuming chore of cleaning a cartridge. I should have changed my system a long time ago.
(5 out of 5 stars) Hayward pump & filter
Reviewed By: Designerman from Kingsport, Tn. ()
This is an awesome product, it works great! Moves water great and cleans water much better & quicker than cartridge systems. Less expensive to operate even if you have to change sand it's half the cost of an cartridge. Had this pool 18 years and look forward to using it several more years.
(5 out of 5 stars) Excellent, Low Maintenance System
Reviewed By: Lindy from New York ()
Pros: Low Maintenance
Excellent system - very easy to maintain! INYO pricing was EXCELLENT and product was shipped VERY quickly. I switched from a D.E. system to this sand filter and would never go back. Keeps water very clean with a handful of backwashes per season.
(5 out of 5 stars) great pool pump and cleaner
Reviewed By: gary from Carnegie, Oklahoma ()
Pros: pump will clean poor quicker and quiter
I was very pleased with the low cost of the hayward 21 inch sand filter and 1 1/2 horse pump.It was shipped quickly and im very pleased with the whole process of the order.