Part # PL0714
Dimensions 14" x 7-7/8"
Alternate Part #'s 26-253-1025, 5535100 SEA, HAY06221, PCPTM-12-H8, PRTM12H8, SP071113, SP0714T, SP704, SP714T, SW711T, TM-12-H8
The PL0714 Valve is a Replacement Valve for the Hayward SP0714T Valve which is Commonly Used on Hayward Pro Series Sand Filters
Is your backwash valve leaking?
Why spend 30% for the Hayward original when you can get an after market valve at the same quality!
This is a replacement top mount backwash valve which is a direct replacement for the Hayward SP0714T & SP711-13 valves as well as the Jacuzzi DVK7 valve.
The Hayward SP0714T & SP711-13 valves are commonly used on the following Hayward Pro Series Sand Filters: S166T, S180T, S210T, S220T, S244T & S270T.
The Jacuzzi DVK7 valve is commonly used on the following Jacuzzi Laser Sand Filters: 160L, 190L, 225L, 250L please note that the Jacuzzi Laser had two style valves a bolt on style and a clamp on style this is the clamp on style. The bolt on style valve is far more common and can be found here Jacuzzi Laser bolt on style valve
Will this valve fit my jacuzzi flo pro ss160hk6fp
Hi, Wayne. Yes, this valve will fit the Jacuzzi Flo Pro SS160HK6FP.
how much sand does a SP0714T1 hold?
Hello, The valve does not hold any sand, the filter tank does. We will need to know the filter tank model number to determine the amount of sand you will need.
Is this a direct replacement for the SPO714T1?
John, The PL0714 Valve is and aftermarket replacement for the Hayward SP0714T1 valve.
does this fit a hayward sand filter pro series s 144t
Hi, Patrick. Yes, this Top Mount Valve - PL0714 will fit the S144T sand filter.
I have a splash pak model SS-160, is this the right replacement?
Hi, Shannon C. Yes, this valve will fit your Splash Pak SS-160 model filter.
Will this fit the Hayward sp0714g11
Hi, Dara. This Top Mount Valve - PL0714 can be used to replace the SP0714G11 valve.
I have sand filter model 272526 /25717610 Will the sp714t fit my sand filter
Unfortunately no, these valves are only compatible for mostly Hayward sand filters and not Pentair.
I have a Sp0714g11 and I can’t find this anywhere. The handle broke. Is there a replacement handle or do I replace the whole thing. If I have to replace I can’t find this model can you suggest a replacement model?
Hi, I. Replacement parts and valve for your model is available on the Hayward Multiport Variflo XL 1 1/2" SP714T Parts Diagram page.
Will this work on model # sw256t?
Hi, Kim. Yes, this Top Mount Valve - PL0714 will work with the SW256T model filter.
will this replace the top for a swim pro model sw236t
Hi Alicia, Yes this valve does replace the valve on a swim pro model sw236t sand filter.
Why cant you buy handle only for spo714tx sand filter?
The handle is available for the SP714T and here you may purchase the SP0714T Replacement Valve Handle
Will this replace the Hayward SP0714TX?
Yes, this valve would be a compatible replacement valve.
S180t1580 high rate sand filter. The part num I have is spx071113 will this fit ?
Hi, Sharon. Yes, this PL0714 will fit S180T Sand Filter.
I have a " high rate sand filter " with model # S310T2. I do not see a model # on the valve itself. Will the PLO714 work?
Hi, Dan. The SP071621 - 2" Top Mount Valve is the correct replacement for the S310T2 filter.
I have old sand pool filter Flo Pro ss240. It is almost 18 years old now backwash valve is leaking. Do you still have any parts to fix the problem Thank you.
Hi, Urszula. Replacing your entire valve with this PL0714 Valve will fix the problem.
I have a old cascade SP-711,will this replace it and how many gpm is this.
Hi Bruce, As long as your Cascade SP-711 valve is mounted on the top of your filter and not the side of the filter then yes the PL0714 would be the proper replacement.
is this item the same as the SP0714T? and is it the correct replacement part for a SP711?
This is a direct replacement for the SP0714T and everything is set up exactly the same as the SP0714T. The SP0714T is made by Hayward and this valve is made by PureLine. This the correct replacement valve for a SP711 valve.
What is the difference between the 4627-23 & the PL0714? Will they both work on the SS185 Sand Filter?
Hi Buster, We are showing that the ports are in a slightly different location on each of these valves and our technical department has determined that the PL0714 is the best replacement for a SS185 Splash Pak Filter.
I have a old Splash Pak ss185 Sand Filter on a 24' round above ground pool. Will this work?
Hi. Yes, this PL0714 valve will work on the Splash Pak SS185 Sand Filter.
is there a warentee on Pureline s valve
Hi Lisa, Yes the PureLine Valve comes with a 1 year warranty compared to a 90 day warranty on the Hayward original valve.
Will this replace Dream Line S190TSCPE?
Hi Sissy, Yes this is the replacement valve for the Dream Line S190TSCPE sand filter system.
Would this replace Hayward Top Mount 1.5" - SP07122?
Jules, This is a replacement for the SP0714T. This will not replace the SP07122.
I have a s244t filter will this work
Yes this is the proper replacement valve for the Hayward S244T filter.
Does this work for a Hayward S245T ?
Yes, this valve will work for that model filter.
I have a SP714 Hayward, will this fit
Hi, Mike. Yes, this Pureline Valve - PL0714 is a replacement for the Hayward SP714T Valve.
I replaced my top mounted valve as well as the sand and the inner workings of the tank this afternoon. Everything went well, no leaks etc. however now my pump loses it prime. What did I do wrong or how do I fix this? It runs fine for about 30 minutes, then loses all compression. Please help.
Hi, Jim D. It sounds like you have a suction leak. To locate and correct the issue, you can use our How to Identify and Correct Air Leaks guide.
I have a Hayward sand filter system model SP714T. It is leaking continually out the backwash pipe. I would like to know if I can replace a part to correct this problem or if I need to replace the entire unit. Do you have any advice?
My valve is sp714tx .will the plo714 work?
Hi, Kenny. Yes, this PL0714 valve will work as a replacement.
will spo714t and spo 714g11 interchange
Yes, Both part numbers cross-reference back to one another.
Okay then, which is the right head for my tank
If you are referring to the valve at the top of the filter then you would need to know the model of the filter itself. If that information is no longer visible then you can always email us a picture of it at email@example.com so we can try and identify it for you.
First time pool owner! Does this part have a air valve to bleed when opening up the pool for the summer?
This valve model does not have an air relief valve.
Will this top mount valve work on my Hayward s21 sand filter, the incoming, return and waiste/backwash are all on different sides?
Jeff, This will work on a Hayward S210T filter. The pump and return ports are on one side and the waste port is on the opposite side .
I have a Hayward Vari-Flo XL pro series model# S166T and SP1515-2-1-ESC will this fit mine if not please tell me what will. Thank You Peggy
Hi Peggy, Yes this would be the correct replacement valve for your Hayward pro series model# S166T
Do you sell decals for the control valve?
Hi. The decals are not available as a separate part.
I have a Vari-Flo Control Valve 11/2 will this work on my Hayward pump . Part # SP0714T
Hi, Virginia. Yes, this Top Mount Valve - PL0714 can be used to replace the Hayward SP0714T valve.
I have an old SP0714D valve. Will this replace it for an old swimpro round sand filter that holds 250 pounds of sand?
Hi. Yes, this PL0714 valve will work as a replacement.
Will this backwash valve replace Purex Triton Tagelus TA40/400
No, this valve is specific for the Hayward series.
I have a Hayward S180T sand filter. Will this be a direct replacement fit for that?
Hi. Yes, this PL0714 Valve will fit and is a direct replacement for the Hayward S180T valve.
Is this a replacement for Model# SP714TX? i have not been able to find anything on this model.
Hello, yes the PL0714 will work for your situation.
does this fit a variflow control valve xl 1 1/2 ports
Yes this valve will replace the Hayward VariFlow XL with 1-1/12" ports.
The # on valve on my pool filter says it is a sp714a, I am not coming up with any info on that number is the sp714t the same?
Hi Karen, Yes this valve will replace your valve that has the # SP714A listed on it.
Will this work in the place for this part Hayward part #SPO714TX serial #21120811001352009.
Hi Sheryl, yes this is the proper replacement valve for your Hayward SPO714TX
Will this fit a meteor type filter?
Hi. This Top Mount Valve - PL0714 will not fit a Meteor Sand Filter.
what setting is for cleaning pool yes first time pool owner
Hi. The Filter position is the setting used for pool cleaning.
Will the plo714 replace the model 715 Vari-Flo?
Hi, Mike. This PL0714 will not replace the 715 valve. You can select from these available Hayward Multiport Valve - SP715 options.
I have a waterco model T600 sand filter. what valve assembly replaces my valve assembly. Thanks
Will a bad spring on the valve cause a decrease in the return water flow when it is set at filter
Hi, Laurie. A bad spring will not cause a reduction in water flow on the return side of your pool. Our How Do I Correct Low Water Pressure? Blog has useful info that you can use to help diagnose this issue.
When I back washed my pool it worked fine but now it want stop no matter what setting it's on and my handle stays loose like the spring is not coming back updo you have any thoughts on what could be wrong
Brian, It sounds like it can be a bad spring or bad gasket. You will have to remove the key/handle assembly and inspect those parts.
I need to replace my praher tm 12 multiport valve but I do not see it listed. What is the replacement number? I do not know what type of sand filter I have . cannot read the label on it anymore. It is a 2007 Ultima 15 foot round pool. The only number I got was off of the packing list for the purchase it is SPT 450 with filter. Can you help me please.
Hi Sue, There are a few different TM12 valves, could you supply us a few photos of your filter and valve as this would help us determine the proper valve for you. To send photos simply reply to this email with the photos or you may send to firstname.lastname@example.org
Will this valve replace a my current Hayward Variflo XL SP0714G11 Valve?
Hi, Ron. Yes, this PL0714 Valve will replace SP0714G11.
Why so many settings on the valve and how do each one work?
Hi Don, here are the valve functions and their different uses. 1. Filter - For normal filtering and regular vacuuming. 2. Backwash - For cleaning filter sand bed of accumulated debris. 3. Rinse - Use after completing backwash cycle to ensure all dirty water is rinsed out of the filter to waste. 4. Waste - By-passes the filter for draining or lowering pool water level and for vacuuming heavy debris directly to waste line. 5. Recirculate - Water is recirculated through the valve, by-passing the filter. 6. Closed - Shuts off the flow from the pump to the filter.
what are the top positions on the sand filter adjustments for?
Hi. This valve has the following positions; Filter, Waste, Closed, Backwash, Recirculate, Rinse and Winterize.
Is the PLO714 compatable with SPO714T1
Hi, Donald. The PL0714 Valve is and aftermarket replacement for the Hayward SP0714T1 valve.
will this unit replace the model 704
Yes this valve does replace the Hayward SP0704 Valve.
what is the dimension of the valve ..? 7"or8" to sit on top of the sand filter.
Hi. The Flange of the valve is 8".
sp714on the collar is their a gasket or oring required
Hi Tom, If you have a Hayward top mount sand filter then yes there is a collar o-ring and you will need this Hayward Sand Filter Collar O-Ring
Is this a direct replacement for an old Ester Williams SP 711 G W .
Yes this is the correct replacement for a SP711GW valve.
I need to buy the clamp for this filter. Do you sale it and how much is it?
You will need this Hayward Filter Valve Clamp which secures this Hayward Valve to a Hayward Pro Series Top Mount Sand Filter.
Does it come with the clamp or do you sale the clamp separate?
Clamps do not come with this valve so those are sold separately.
Will this fit a Hayward E Series model E100 sand filter. Also will it come with the plastic screw in connecters that the hoses connect to?
Yes this is the correct replacement valve for the Hayward E Series model E100 sand filter.
I have a Hayward pool filter and my return lines have no pressure, could the sand filter head be bad and can I get the whole housing that sits on top of the sand filter, it is a sp714 a all i see is 714t
Mickey, When is the last time the sand was changed? If the valve was bad, it would typically leak out of the waste port or the by the handle. The SP714 and the SP714T are the same valve.
I can not fine a Diffuse Assy with gasket for s300 where can i get that part or what subsutue part can i use will sp714t stop water from leaking when the pump is on.
Hi, Susan. The PL0714 valve will not replace the S300 valve. The Sand Filter Valve Diverter w/ Spider Gasket - 47304003080 will fit that valve and other replacement parts for the S300 valve are listed on the Above Ground Pool Sand Filter parts page.
Will this fit a swim pro SP-711SW?
Hi, CC. Yes, this valve will fit the Hayward Swim Pro filter replacing the SP-711SW.
Will this replace an astral top mount model 22358 ??? If so I am willing to order one...I need a quick response please tks
Will this work for a s180 hayward? or does it need to be 2" vs 1.5"?
Yes this does work on the S180T filter and the valve on that filter is a 1.5" valve, so this will be the valve you need.
water flow directions for spo714t
Hi. The ports are labeled PUMP, RETURN, and WASTE so that installation is done correctly.
Are the spo714 and spo714T the same and will It fit a s200 series filter what are the diferrences
Yes, those are the same valves and they are not compatible with that model filter. Please view the parts diagram here and view key 15 for the compatible valves for that model.
Will this replace Hayward SP0704T Vari-Flo Control Valve 1 ½”
HI Bill, Yes this valve will replace a Hayward SP0704T Vari-Flo Valve
I have a Hayward pri series xl variable flow. The only number i can find forr what I call"filter head" us sp714 there is no other numbers. What do I need to replace tge unit that gies into the fikter and then yoy "collar" clamp it in?
Hi Nancy, This would be the correct valve for you. You will also need this Hayward Valve Clamp to secure the valve to the filter.
Is this unit compatible with 261124 or the TM12D?
Hi, Ron. This PL0714 will not replace the 261124 or the TM-12-D valves.
Will this fit on a Flowpro SS240 sand filter??
Hi, Jake. This PL0714 valve will fit the Flo Pro SS240 sand filter.
WILL THIS VALVE WORK ON AN OLD PROLINE SANDFILTER.
Hi. This valve will not fit any of the available Proline sand filters.
Does this valve fit the AT3120 filter
Hi, Rick. This PL0714 valve will not fit the AT3120 filter, you will need p/n 261186.
I need to replace a SP0714T Vari Flo XL Control Valve - 1 1/ 2". What is the correct number for the replacement?
Yes, the PL0714 is the correct valve for your current valve.
will this valve work on an aquatool AT3120 filter
The correct replacement top mount valve for your AT3120 is part number 4600-1186.
will this valve work on a dream line mod s170tscp?
Hi, J Mann. Yes, this valve will fit the DreamLine S170TSCP filter.
i have a swim pro model SP-7115W valve will this model replace this thank you
Hi, Scott. Yes, this valve can be used to replace the SP-7115W valve on the Hayward Swim Pro filter.
I believe my mult port Dirverter valve is a is a HAYEARD -SPO714T ( it has a winter position). I need only what I believe to be called a "KEY COVER and HANDLE ASSEMBLY REPLANEMENT. Can I buy just this part?
Hi, Stephen. The p/n for that item is SPX0714BA.
I don't know much about my backwash valve. I know its a Hayward veri flow. The model so is 710/82. What is a replacement for tha? I have some pictures of it that I can email also
Hello Dustin- The SP710x82 is not a Hayward valve model, but the Vari Flo Multiport Valve 1.5 for S200 Sand Filter - SP0710X32 is similar to the part number you provided. Do you know the model of the filter and can you send pictures of the valve and filter please?
I have an American products 26" Eclipse TM high rate sand filter with a Praher TM-12 multiport valve. Will this work as a replacement valve??
Hi, John. This valve will not fit the American products 26" Eclipse Sand Filter, you will need p/n TM-12-S8 valve.
My valve has SP714-A on he side of it. Will this valve replace mine? PL0714
Hi, Tim. Yes, the PL0714 valve will replace the valv that you have that is labeled as SP714-A.
is the Hayward spo714t the same as the spo714t1 ? thanks
Yes the two are the same.
I have a s244t filter and water leaks thru waste line as pump is running
Hi, Roger. To resolve the issue of your leaking valve, you can replace the entire valve (PL0714) or the Diffuser w/ Gasket (SPX0714CA).
Will this valve fit the Swimpro Sand filter Model SW236TPAKS ? I currently have a Hayward Variflo XL Valve Model SP0714TX.
Hello Jerry, Yes the PL0714 will work on SW236T HAYWARD FILTER.
i have a swimpro sand filter sw144T they say it is obsolite is there a replacement top mount valve i beleive it is a multi port 6 way control valve fits a tank holds 100 pounds sand
Hi, This Top Mount Valve (SP0714T) will fit the SW144T sand filter.
Hello! I have a very old filter - SP0711-A13. The valve and lateral assembly is just now in need of replacement. I've read that the SP0714t valve is the correct model number, but I'm not sure about the lateral assembly. Would you happen to know what lateral assembly would fit this? Thanks!
Hi Brian, This SP0714T valve will replace the SP0711-A13 valve, but we will also need to know the model of the tank that in order to locate the lateral assembly.
WHAT IS DIFFERENCE BETWEEN A HAYWARD VALVE SP0710, SP07122 & SP0715
The SP0710 and the SP0715 are for DE filters and are almost identical except for one having 1.5" ports and the other 2" ports. The SP07122 is for sand filters.
Will this replace a w. cooper 1.5 inch 6 position valve part # 2080?
Hi Joseph, The TM-12-L is the correct valve used with the W. Cooper Sand Filters.
I have Hayward pro series model s166t. Will this top mount work on my model? Thanks.
Hi Jim, Yes, the SP0714T valve will fit the S166T filter.
I have a Hayward filter sp 711 a13. After I backwash and put it back on filter it doesn't return to strictly filter. I am losing water still back washing. Any suggestions. Will this part work and fit?
Hi Rob, The SP0714T is the correct replacement for the SP711A13 valve which will resolve the problem that you're having.
Does this valve replace MODEL S244T
Hi, This Valve can be used with the Hayward S244T filter.
will this fit a hayward filter model number s180t1580s
Hi Linda, Yes, this valve will fit the Hayward S180T filter.
Does the a sp0714T replace the sp0714A for a Hayward Vari-Flo XL valve?
Hi JS, Yes, the SP0714T valve is the replacement for the SP0714A.
Does the current sp0714T replace older SP0714T models? Does it include gauge, o ring and installation clamps?
The SP0714T is the same model Valve assembly. The valve assembly includes the pressure gauge and the o-ring. It does not include any clamps.
The filter does not always work no matter what setting I put the control valve handle in, e.g. filter, backwash, rinse, etc. If I play the handle back and forth a bit around a setting it will eventually work but that can take a long time to happen. The control valve is very hard to move as well.
My pump seems to be working well, but I hear a "gurgling" sound inside the key cover and handle assembly (Hayward SPX714T). The pool heat pump will not turn on and it is indicating a FLO problem. Do I need to replace the key cover and handle assembly?
You have an air leak somewhere which is reducing your flow rate. Is anywhere on your pump leaking water? You will hear a gurgling sound in your filter if your pump is leaking as well. If your pump is leaking, I'd change the seals in it which is a cheap fix. Less expensive than changing the key assembly on your filter so that would be a place I'd start first.
Will this work on an AquaTools sand filter model number AT3123?
The correct valve for that filter is part number 4600-1186.
Do you think there is plenty in stock of this item I need to wait until Aug. 1st. to order this part, but don't want to lose out on this item. Sincerely Vicki Leo
We currently have a number of these available and I do not foresee you having an issue ordering one.
Will this fit a 22"Proline high rate sand filter
Yes that will fit the proline sand filter.
I have a SM1915SHG filter but the sticker shower where the back wash and everything are located is gone. Will it be the same as the labor on this one?
Hi Clayton, This Top Mount Valve (SP0714T) can be used with the SM1915SHG filter.
Will the SP0714T work on the S144T filter? To replace the SP0704TX that is currently on there with no sight glass. Thank you, Dana
Hi Dana, Yes, this SP0714T valve will fit the S144T filter.
part # for muti port gasket for this valve
Hi, If you're needing to replace the diverter gasket, it's not sold separately only available with p/n SPX0714CA.
bought used Hayward sand filter/pump. serial nr/model nr wore off filter. . Valve is vari flo xl 75gpm/284lpm sp0714t1. Pump is century 295c73m bn35ss 1.5hp part 186886 .o1. Hope this info will help. I need to know what size the filter is and how much sand it holds.
Hi Daniel, Unfortunately, the info provided in not enough to find out what size filter you have. If you can provide the width and height of the tank with the valve I can find out how much sand is required.
I currently have the Hayward Vari-Flo SP-711-TXC. Will this one be the right replacement?
Hi, Yes, the SP0714T will replace the Hayward Vari-Flo SP-711-TXC valve.
will the sp0714t work with the Hayward model S244T
Yes, the SP0714T is compatible with the Hayward S244T Pro Series.
Will this fit a High Rate sand Filter SS240?
The SP0714T is a correct replacement valve for the Splash Pak SS240.
I need a replacement valve for Hayward SP 0704, do you carry these?
Here is a link to the Hayward Multiport 4 Position 1 1/2" Vari-Flo Model SP704 Parts diagram. The handle Cycolac (spx0710xf) is showing in stock at this time.
Can the valve handle be lubricated? It is extremely hard to turn to the different positions.
Hi, The handle does not require any lubrication. The Non-Metallic Bearing (SPX0710Z16) that is located under the handle may need to be replaced.
Will this fit my Model S190TSCP?
Tammy, Yes, this valve will fit the S190TSCP.
Does this valve fit Hayward Pro Series, model S-166T
Yes this is the correct replacement valve for the S-166T Hayward Sand Filter.
I have a Hayward s-245t filter system. what top mount hi-flow control valve will work on my system? thanks! z
Zack, The SP0714T valve will work on your filter.
I have a proline ww2215P sand filter. Will this fit?
Hi, This valve is not compatible with a Proline WW2215P filter.
Is Hayward model SP0714T the same as (on my Vari-Flo XL Valve's data plate) SP0714T1? Just checking to ensure order of correct parts. thank you.
Hi, The SP0714T valve will replace the SP0714T1.
i have a hayward sand filter , how often do i change the sand,and what kind of sand ? my water has starting to pulsate, i dont know if my pump is getting weak, or if the problem is in the filter thanks;sam
The sand in your filter is recommended to be completely changed every 5 years with Pool Filter Sand.
i have a hayward vara flo valve on my sand filter, the handle has become loose i dont feel like it is locking in to position,my water is pulsating, do in need to repace it ???????????? thanks; sam
Sam, The valve shoudl not make the water pulsate. I would recommend checking the pump and filter.
Will this replace a waterway port. I cant find a model number on the valve. When I keyed in the number on the split-nut, this came up.
Hi Cliff, no this valve does not replace a Waterway valve. Could you email us few photos as this will normally allow us to pinpoint what valve you need.
I have the Hayward Pro series S210t filter assembly and the valve assembly marked sp0714a but after doing research on it I keep finding the sp 0714t is that the valve I need and are they interchangeable with my filter? They look exactly the same to me
Hi Darren, The SP0714T is the current replacement valve for the Hayward Pro series S210T filter.
Hello Patrick I have a S166Tfilter i change the sand a few days ago when I turn the pump the pressure in the return is fine for about 12 minutes then it drops considerably I then back wash it runs well and after about 12 minutes the pressure drops again could you help please
Hi Bally, You may want to check and replace the seals on your pump, it sound like you have a suction leak.
I have a poolco filter of which the multi port valve needs to be replaced I can send a picture if need be What brand would I use poolco is out of business.
Hi Lori, Here is the Top Mount Poolco Valve you would require.
the valve handle is very hard to switch positions on my sp 0714c valve, I took the valve top off and checked the gasket and it doesn't seem to be damaged...what might the problem be?
Al, If the handle is hard to turn, I would recommend lubricating the gasket with a non petroleum based lubricant to see if that helps.
Can sp714a be replaced with sp714t
Hi Howard, Yes SP714A can be replaced with a SP0714T valve.
is this the same as the sp0714c
Hi Randy, The SP0714T valve will replace the SP0714C valve.
Is a SP0714T vari-flo valve the same as a SP0714TC
Yes this would be the same valve.
where can I get a replacement valve for my sand filter it is about 25 years old and american products 987109?
Hi Ron, Could you email us some photos of your filter, filter label, and valve? This would help us determine the correct valve for you.
I have a Hayward Pro Series High Rate Sand Filter S-220T and need to replace the gasket between the vari-flo control valve and the filter. Can I purchase just the gasket or is this whole unit what I need to purchase? Is this the correct unit for my model?
Hi Harold, If you just need the o-ring that goes between the valve and filter for your Hayward S-220T then you will need this Hayward S-220T Valve O-ring. If you did decide to replace your entire valve then the SP0714T valve is the correct replacement valve for your S-220T filter.
I have a sp714 vari-flo, can I replace it with a sp0714t
Yes, the SP714T is the correct replacement for your current valve.
I have a 150 lb. sand filter with no name tag the diverter valve has a number 27-2599 which maybe a Pentair valve I want to know if this Hayward Pro Series valve SPQ714T would fit this filter which is 19 inches in diameter
Hello, Unfortunately, this will only fit Hayward filters. The only way to find the replacement valve would be with the valve model number or the filter model number.
What makes sand go into pool through eye return
The most common reason sand enters into the pool is one of the laterals or the lateral assembly pipe is broken or has a crack.
I have an Aqua Tools filter AT3125 and I was looking for the label ring on the multi port valve. The one that says rinse, waste, close, etc. Do you sell just the label and if so, what would I order? Thank you
Shannon, Unfortunately, we don't sell the label. You may be able to contact Pentair for a replacement label. You can reach them at 800-831-7133.
The internal rubber gasket failed on my sand filter. Went to local store to buy a new one. Found that I could not just get the gasket, & had to buy the gasket & the plastic internal piece that it fits into. I had to remove the rod & spring mounted handle to replace the entire part. Very difficult to reassemble!! When I put it back together, it to leaks around the handle. Am I missing a gasket or do something wrong in putting back together. Is there a gasket above the spring I am missing.
Hi Alan, I would take a look at this guide on How to Replace a Mulitport Valve Spring as well as this Video on How to Replace a Multiport Spider Gasket These should help you determine if you missed anything in your re-assembly of the valve.
I have a Swim Pro filter. What filter head would replace a SP714-A filter head?
Hi Tim, This valve will replace the SP714-A and work with a Hayward Swim Pro Filter.
Will this replace the S244T 1.5 in thanks?
John, This is the correct replacement valve for the 1.5" Hayward S244T.
I have a Vari-Flow 711, and see I need to acquire a 714 to replace it. But how do I determine if I have a 1.5 or 2"?
Hi Steve, If your valve says 711 then you would have the 1-1/2" model and the SP0714T is the correct valve for you.
sand is getting into my above ground pool, and i already replaced my and my whole lateral assembly and all the laterals. what could be the problem?
Hi Marianne, Here is a good article on How to Stop Sand from Returning to your Pool I think you will this article to be helpful.
I have a Hayward vari flo sand filter. SP711 TXC. The head is cracked and it is leaking under the gauge. Does the SP714 replace this?
Hi Dee, Yes the SP0714T valve would be the correct replacement valve for you.
Does the 714 T replace the hayward vara a flow 711 top mount filter head 1.5 inch
Hi Albert, Yes the SP0714T valve does replace the Hayward Vari-flow SP711 top mount valve.
Would you know what would be the correct replacement valve for a 19" Proline sand filter. The only numbers I could find on the valve is 718-1960
Hi Peter, You would require this Waterway ProLine Filter Valve The SP0714T would not be the correct valve.
I have a spo714t Hayward sand filter and broke two of my lateral fingers. Is there a replacement for them? I have been searching but found nothing the looks like them
Hello. The part number you provided is for the multi-port valve used on a variety of Hayward sand filters including the Pro Series, Swim Pro, Sand Master and E-Series. To correctly identify the laterals or other parts needed you will need to identify a part number or model name/number off of the sand filter and search for replacement parts for that filter. If the part numbers are not available on the sticker of the filter, you may email us photos of the equipment via email to email@example.com.
Just installed a new hayward series var-flow XL and new pump and sand filter system. Love the system. Have one problem, when I switch it to back wash. nothing happens. The pump is running, you can see the water moving in skimmer basket, but no water is coming out the back wash port. Any suggestions to fix this?
Hi Jane, I would recommend making sure that you your hose connecting are in the correct port on the filter.
whatever setting I have my multi port valve on I get water leaking from the waste line.Do I need a new valve or just a new gasket?
Hi Mark, In most cases this issue is due to a bad spider gasket. I would suggest replacing your Hayward SP714T Spider Gasket & Diverter (the gasket is only sold with the diverter).
How do you replace the multi port valve(SP0714T)?
Hi, We do not have instruction for installing just the valve but our How To: Install a Pool Sand Filter guide will instruct you on how to install this valve.
I have a SP711A13 will this SP0714T be a direct replacement and can I use the old collar to attatch it? And is the anthing else I need to get going. Can you recommend a good oil or grease for the large O ring gaskets.
Al, The SP0714T will replace your existing valve. You should be able to re-use the existing clamp. I would recommend any non petroleum based lubricant to lubricate the gasket.
would this fit a sand filter model # SM1915SHG?
Angie, That model # does not show in my system. The SP0714T valve will fit most Hayward top mount sand filters.
I have a hayward S144T, will this control work? I keep comming back to this one but it does not show the right model number.
Robbie, Yes this fit on the S144T filter tank.
I have a pro series vari-flo control valve serial # 320, sp714, model h. is this your updated or substitute
Hi Bill, This Valve is the current replacement that will replace the SP714 valve for the Hayward Pro Series filter.
thank you for your help. If I order the Hayward vari flo valve today how long is the mailing time?
Hello, Due to the upcoming Holiday, orders will ship on Tuesday May 31st (the earliest) and will take 3-6 business days for delivery (not including weekends).
I have a Hayward vari flo valve sp711-A-13 which I am having trouble finding. Is there a compatible vari flo valve?
Hello , The SP0714T valve is a replacement valve for the sp711-A-13 Vari-flo Valve you currently have.
I hooked up my valve backwards for a couple of days and now I'm getting sand in my pool do i need a new valve
Tim, You may/ may not need a new valve. Usually, if sand is shooting back into the pool, the lateral assembly may be damaged.
i need to replace the valve on my pool filter. it is a Hayward.Model SP 711 13. What is the part number for the replacement valve. Thanks is advance.
Hi Cy, The SP0714T valve will replace the SP711 valve.
My model num is S170TSCP will this SP0714T work with my sand filter?
Hi Adam, Yes this is the correct filter for your Hayward Dreamline S170TSCP sand filter.
Would this be the right replacement for the Hayward Vari-flo SP 710 multi-valve port? I don't see any other letters or numbers after 710 in the model label of my current valve. Thanks, Greg
Hi Greg, Could you let us know the make and model of your filter, there should be a label on the side of your filter that give this information or if you wanted to email us a photo showing the complete filter then that would help us determine the proper valve for you.
I have a sp714 value and I am experiencing water leaking through the waste line when 'i have the setting on circulate. 'do 'i have to replace the entire value?
Hi Steve, the most common culprit for leaking out of the was port is a bad Spider Gasket & Diverter replacing this part should do the trick. The only other part that sometimes causes leaking out of the waste port is the Valve Spring.
I have a Hayward pro series sand filter. I have the sp ;714 model valve on the top of it. When I switch from back flush to regular filtering, I still have water leaking from the backflush outlet. Do you have any answers on what might be causing this probalem?
Hi Ron, The key seal gasket is bad and will need to be replaced, p/n SPX0714CA is the part needed or you can replace the entire valve.
I have a Dream Line Sand Filter Model #S190TSCPE and am needing the Filter Control Valve. Are these still available?
This valve here (SP0714T) would be the correct replacement valve for the Dream Line Sand Filter Model #S190TSCPE. This valve is in stock and ready to ship.
Can I just replace the gasket ?
Which gasket are you attempting to replace on the SP714T valve?
I have a Heyward Pro Series Model S144T... I need to replace the entire valve assy... I keep seeing model# Spo714 as the proper replacement... The original was # Spo704... Is that the right replacement, for model #SP0704TX? I just want to make sure it fits the "Pro Series" Model S144T, before I Gamble $100. on the difference between the "704", and the "714", in the model #`s... Any help would be much appreciated, Thank You.
Yes originally the S144T used a SP0704T valve which was discontinued and the SP0714T is a direct replacement for the SP0704T valve so you should be all set with this valve.
how much is a spider gasket and o rings for part #sp0714t
Here you may View Pricing on SP0714T Valve Parts
I broke off the black handle ... Do I have to replace the whole unit
Hi Carmine, The Handle (SPX0710XF) is the replacement handle for this valve.
Hi, The plastic port where my pressure gauge screws In has a crack. My filter is model SP714TC. Is this the correct part to replace it with?
Jenn- Yes, you would need to replace the entire valve, and the SP0714t Top Mount Valve for Sand 1.5" would be the correct valve.
Will this valve work on a Hayward Swimpro S196T filter?
Michael- The Sp0714t Top Mount Valve for Sand 1.5" will work on your hayward swim pro filter.
Does this valve fit a s196t filter?
which value will work on a Sta-rite cristal-flo hi rate sand filter T-180wf??
Hi Tom, This valve with not fit the T-180WF filter, the Sta-Rite Multiport Valve (261186) will.
Is part number SP714 still available?
Pam- The sp0714t Top Mount Valve for Sand 1.5" is the sp714 valve.
The model number on my control valve is not readable. The number on my sand filter is S-190-TSCP. In my manual, it says that I need part no SP-711-13, can I use the SP714T part for this part. Also, how long is the warranty on these parts. Do they come with an o-ring? Thanks!
Hi Pam, This valve will work with you S-190-TSCP model filter and will also replace p/n SP-711-13.
the number on my valve body is SP714A I want to replace the entire head
Hi Henson, This valve will be the correct complete replacement valve you'll need.
Will the sp714t be the replacement for an older sp714?
Hi Mike N., The SP0714T will replace an older SP417 Top Mount valve .
Is Hayward Part #SP0714T the complete top valve assembly?
Hi Ed, This is the complete valve, it does not include the Clamp Assembly.
I have an SM1915shg filter system with a 1 1/2 hp pump. I need a multiport valve. Is the SP0714T the replacement I need?
Hi Lynn, The SP0714T Valve is the correct replacement valve you will need.
Will this fit model sm 1915Z1?
Hi Steve, I was not able to cross reference model # SM1915Z1 to any specific filter manufacture, so I can confirm if this valve would work. If you can send more info to firstname.lastname@example.org we can look into it.
I have a Hayward vari-flo xl tm valve you are showing the same valve but does not say tm picture looks identical. Is this the same valve. Greg
Hi, This would be the same valve as the Hayward Vari-Flo XL TM valve.
I have a S190tscp sand filter . Is this the correct replacement valve? Can I replace just the top piece?
Yes this valve will also work for that model filter. You can view that filter's part diagram here.
Is the 1.5'' plumbing inside diameter or outside diameter?
Hello, The 1.5" measurement is referring to the size of the pvc fitting thread that would fit inside of the valve.
my multiport valve part # SP714TI and serial #140G35. the one I looking at is part #SPO714T . Are they the same
Hi Kenneth, The 1.5" Top Mount Valve for Sand (SP0714T) would be the correct replacement valve.
my serial number on my Hayward filter is s210t93s which valve do I need also I an leaking water out my waste could this just be spider gasket
Hi, The 1.5" Top Mount Valve (SP0714T) would be the correct complete valve. If you replace the complete valve you will not have to replace the Key/Seal Assembly (Diffuser w/ Gasket Glued In) (SPX0714CA) for the SP0714T valve.
I am looking for a spider gasket for an SP07614T valve on a Hayward S166T filter. Is it available, how much does it cost, and how long to ship to 08094 area code? Thank you
Hi Red, The Hayward S166T Filter uses a SP0714T valve which would require using the Key/Seal Assembly (Diffuser w/ Gasket Glued In) (SPX0714CA). I was not able to find a SP07614T model valve.
I would like a spider gasket for Hayward SP711-TXC. I believe this is a "NO GO" so will the whole head mentioned here bolt on to that filter?
Douglas, You can find the spider gasket for the SP711 valve here.
I have an I ground pool with a Jacuzzi sand filter. Model #is DV ASSY 7-POS 1-1/2 NPT. 2002 I need a new top mount valve. I think. It is sending water through to the outside ground when it is on filter. The pool place said the valve cost $60 but wanted $150. To put it in. Do you have what I need and how much?
Will this part replace part SP-711-13? THANK YOU
Hello Perry - The SP0714T will replace the SP-711-13.
The vari-flo control valve on the Hayward S180T has slipped the bolt on the top and water leaks through the backwash hose. Can the bolt be reinserted to the proper position?
Hi, Our How To Replace a Pool Multiport Valve Spring guide can provide you with the correct information to properly position the cover for installation.
Hi Everyone, I have sand im my pool. Is there something broken in the filter. Thank you for your response.
Guy- It sounds like there could be an issue with your laterals or your lateral hub assembly on the inside of the filter.
I need the lock ring that holds the valve on tank.
Hello Patrick - The clamp for this valve and Hayward sand filters is part number GMX600NM (4802-03D).
I have a S-244T sand filter. I have a slow leak from the waste line when the filter is running. What part do I need to replace to fix this leak? Also, is this something I can do myself if I can get the part? What would be the problems I could encounter replacing it myself?
Hi Cindy, You will need to replace the Key/seal Assembly (Diffuser w/ Gasket Glued In) (SPX0714CA). You can follow our How To Replace a Pool Multiport Valve Spring for step-by-step replacement instructions.
We have a S166T sand filter, however the valve position diagram has come off the unit. What diagram is compatible with that filter?
I have a dream line S170TSCP sand filter, need replacement part for top mount valve? Thanks
Hi Nathan, The 1.5" Top Mount Valve (SP0714T) will be the correct replacement valve for your Dream Line S170TSCPE Sand Filter.
does this come with the pressure valve also, the guage?
There is no "pressure valve" on this multiport but if you are referring to the pressure gauge then yes it does comes with the valve.
Hello I was looking at my valve . SP714 is all I can still read on . Can you tell me what valve parts will fit it
Hello Mark, parts for the Hayward SP714T valve can be found on the Hayward Multiport Variflo XL 1 1/2" SP714T Parts Page
my model number for my top mount valve is spo714tx, is there a new replacement part for this one type?
Yes this would be the proper replacement valve for your Hayward SP0714TX valve.
I have a Hayward GM245 filter with a SP711-13 valve. It looks like the SP0714T is the correct replacement but the ports are not one above the other like the old one. Is this the only valve available as a replacement?
Hi Betty, the SP0714T would be the proper replacement valve for the SP711-13 valve being used on your GM245 Filter. This would be the only replacement valve and you may have some slight re-plumbing due to the change in port location.
Will this valve work on a S166T sand filter?
Hello Ken - The SP0714T is the correct valve for the Hayward S166T sand filter.
Is this the right valve for the S 245 t high rate sand filter.
Yes this is the correct multiport valve for that model filter.
Looking for a replacement valve assembly for a 1.5hp sand filter model S230T. Can you help?
Hello, The Hayward SP0714T valve is the correct valve for the S230T filter. Please note that this is a 1.5" valve.
Hello, I have a very old Hayward top mount sand filter (22inch, 2.64 Sq Ft filter area) and the only P# still visible on the Vari-Flo valve is SP711 (50psi and 60gpm). Could you provide me with the modern replacement valve(s) P#'s. Thank you in advance
Hi, The Top Mount Valve for Sand 1.5" (SP0714T) will be a modern replacement for your SP711 valve.
Is the sp0714tx the same as the sp0714t valve?
Hi Stephanie, The 1.5" Top Mount Valve for Sand (SP0714T) is the same as the SP0714TX Valve.
my sp0714t filters and backwash at the same time while handle is in filter position the pressure shows 0-2 lbs help I replaced the top piece with handle, it eithers trickles out or some times is about half the flow out of the back wash pipe, no pressure but good floe to the pool line...help
I have a Hayward S-166T high rate sand filter. When I have the valve in any position the water still goes out the wast line. what do I need? does it have a gasket or O ring in the top??
Hi Marnie, Sounds like you need a new spider gasket for your filter valve. The spider gasket is not sold seperately and is only available as part of the Hayward SP0714T Diverter. See our guide on "How to Replace a Spider Gasket on a Multiport Valve" for more information
Hi, I have a SP071113 would this mount fit my filter?
Hi Shirley, Yes the SP0714T is the direct replacement for your SP071113 valve and will mount your filter.
I have an old SP 711 A 12, What would the replacement part be?
Hello LJ - The SP0714T is the correct replacement valve.
I have model sp0714t1 and when it's running on filter ihave water returning to the pool and at the same time water is flowing out the waste line. ihave to put the waste line in the pool so my pool doesn't empty. turning the selection lever has become more difficult. what do I need?
Jim, You will need to replace the Key/seal Assembly (Diffuser w/ Gasket Glued In) (SPX0714CA). I would also recommend replacing the Cover O-ring (SPX0714L). You can follow these step on How to repair a leaking Hayward backwash valve.
I have a SP0714T1 and I need a new gasket for the Valve up where you turn to different setting. How can I order one?
This spider gasket comes in a key/seal assembly. Please click here to go to the page where you can add the item to a cart to place your order.
I need to replace the filter valve on my Hayward system. It's old and the model and serial number is no longer readable. Can you tell me any other ways to determine the replacement valve I need to purchase. The only identifying info i can find is Vari-Flow XL Valve. Thanks
Hi Phil - If you have a Hayward Multiport Valve top Mounted on a Sand Filter with 1.5 " ports, it is most likely this MPV. It is a Variflo XL Valve and is the most common of these valves. Lool at the pictures in this link and compare them to your Valve in appearance and dimensions.
is part #4700-14 still available ?
Yes the 4700-14 Hayward Valve Label is still available.
I need a new sticker/label for my valve. Do you sell them?
Yes, the decal label part number is 4700-14.
Can I replace my above ground Valve SP0714D with SP0714T1?
HI Jane,Yes this valve would be the correct replacement for the Hayward Vari-Flo XL Valve with model number SP714d.
Why is air being generated thru my multi port valve
It is possible the oring is not seated or you will need to apply lube to the oring to create a tight seal.
The handle on our valve is not fitting into place when turning it to the different positions. After taking it apart we found the spring to be corroded and broken. We need to replace the spring...do you sell just that part?
Yes we do carry the Spring Only for the Hayward Multiport Valves.
Is there a replacement spider gasket for a Hayward Vari-Flo XL Valve bearing the ID code SP 0714 C on the underside of the valve assembly?
Hi Edward, the spider gasket is not sold seperately and is only available as part of the Hayward SP0714T Diverter.
Is this the correct replacement valve for Hayward sand filter model S244S?
Hi Sandrad, the last digit of "S" on the S244S filter indicates a side mount filter and this valve is for a top mount filter. The S244S would require the SP0710X62 Valve if you have 1-1/2" plumbing and the SP0175X62 Valve if you have 2" plumbing.
I have an SP714-A model. Will this valve replace it?
Hi Charles, The sp714-t will replace your sp714-a.
My valve isnt working . The spring is rusted and wont let the handle lock in the slot.
Tom - It sounds like the top assembly of the valve needs to be replaced. Part number SPX0714BA is the top assembly.
Did you miss type SO0714T for SPO714T to replace valve #SP0704TX
The SP0714T is the replacement for the SP0704TX
What valve replaces Sp0704TX
The SO0714T is the replacement for the SP0704TX
i use a self contained pool cleaner to clean my pool,but when i turn my filter on after cleaning im getting dirt on the floor of my pool, my filter has new clean sand, could my valve be bad. thanks.
Hi Kris, Yes this is a sign of a bad filter valve. We also have an Article on Getting Sand Back in Your Pool which lists other common culprits.
does this fit a S210T?
Yes, part number SP0714T will fit onto a SA210T. Please look at the parts explosion of the Hayward S210T for any other pieces you may be needing.
The handle on my filter SP714T1 is not locking into place and my "filter" is also leaking water into my backwash hose and I am losing inches of water. The "ring" just inside the handle mechanism looks broken and does not lock tightly into place. Do I need to replace the entire Veri-flow XL Valve or is it a gasket replacement or something else?
Hi Marlo, Based on the situation you explained I would suggest replacing the complete SP0714T valve.
I have a Hayward pro series sand filter model S-180T, with a SP714 TC valve. Is the SP0714T the correct replacement?
Hi James, Yes the SP0714T would be the correct valve for your S180T Hayward Sand Filter.
Does this valve replace Hayward SP-704 valve?. It will be going on a Hayward GM142-6 Sand Filter.
Hi Brad, Yes the SP0704 valve was discontinued and the SP0714T would be its correct replacement.
i have a S-244T that just started leaking around the flange clamp, directly beneath both the waste line and pool return lines. It only does this in the filter position immediately after I back washed. Is it likely the o ring or does the entire valve assembly need to be replaced?
Hi Kevin, The most likely problem is a bad spider gasket and you would need to replace your SP714T Difusser & Spider Gasket here.
Does this model #SP714t replace the Hayword Vari-Flo XL Valve motor with model number SP714?
Hi David, Yes this valve would be the correct replacement for the Hayward Vari-Flo XL Valve with model number SP714.
I have an s210t sand filter. Is this the right multi port to replace my current one?
Hi Mark, Yes the SP0714T valve is the correct valve for the Hayward S210T sand filter.
What should the normal circulating pressure be fire this valve? My father used to maintain the pool and passed away so this is all new to me...pool store says 20 yet on the side of my filter it looks to me like it says 35...just checking!
Hi Erica, All plumbing set ups are a little different so there is no "normal" operating pressure. What you would want to do is backwash your filter to clean the filter, once this is done note your clean filter PSI rating. Once your pressure reaches 6-10 PSI over your clean PSI reading then it is time to backwash the filter. Normally we see the clean PSI readings in the 10 - 15 PSI range. Most likely the 35 PSI you see on the label is the max PSI in which the tank can handle.
Does this replace the sp-711-13?
Richard, The 1.5" Top Mount Valve for Sand is the replacement for your SP-711-13 valve.
We have had our pool for years now. The Handle to the Filter on top of the pump broke, can we get a replacement handle for our SP714 filter system????
Jerry, Handle SPX0710XF is the replacement handle for the SP714 Multi-Port vale.
I have a Hayward S180T sand filter. The current vari-flo valve is a SP711. Which model of vari-flo valve will I need to replace the SP711?
Bobbie, Top Mount 1.5" Valve for Sand SP0714T is the replacement for the Vari-flo SP711.
I have an SP714 T1. When the filter is running, there is a fare amount of water running out the discharge hose. I took off the top part of the housing and it appears that the "gasket" material that separates the chambers have deteriorated to the point that it also appears that water could be bypassing each of the chambers. Can I get by with replacing the top half, or do I need to replace the whole valve housing etc.?
Hello David - The cost of the top assembly is as much as a complete valve. We would recommend replacing the entire valve. You could always use the top assembly from the new valve and save the bottom half.
I have a Hayward SP711 Vari Flo Valve that sits on top of a S244T Sand Filter. I know the valve is old is there a newer model that replaces the SP711. I read somewhere that the SP0714T replaces the SP711. I'm just checking before I order a new one. Thanks for your time
Hi Doug, you are correct the SP0714T valve would be the replacement valve for the older SP711 valve.
Hello, Are the Hayward SP714T and the SPO714T valves the same or interchangeable? Thanks
Yes that is correct.
I have the sp0714tx valve and is leaking when in filter position do I need to replace the whole assembly or is there a gasket/o ring I can replace?
Hi David, If your valve is leaking from the upper half of the valve, then I would suggest the SP0714T Handle and Cover Assembly. If your valve has a leak on the lower half of the valve then I would suggest replacing the entire valve with the SP0714T valve listed on this page.
i have a sp0714t the handle broke on the valve where pin fastens the handle to the valve on the valve side can you just replace that part if so how does it come apart it is not two weeks old
Hi Johnny, Can you email us a photo of the crack? If the crack is on the valve body then most like you will need to replace the entire valve. If it is just the Handle which is cracked then you would need the SP714T Valve Handle. You may also view all of the Hayward SP714T Valve Parts here.
I have a Haywood SP714T valve, can you tell me what the pressure gauge should read?
Yvette, The pressure reading on your valve varies. The HP of your pump, size of your filter, plumbing size all will determine what your pressure should be. Usually when the filter is first installed or when the sand is changed you can get your ideal pressure level.
Want to replace my harward vari-pro serial 120b28, modèle sp-711-txc, 50 p.s.i, 60 g.p.m.
Ghislain, The 1.5" Top Mount Valve for Sand Filter p/n SP0714T is the replacement for your old SP-711-TXC multiport valve.
I purchased a sp0714t valve not more than 2 years ago. It now leaks through the threads on the in and out ports. I replaced the plumbing and used Teflon tape. Is my value shot and might it be under warranty.
It does sound like you may have a crack somewhere in the valve unfortunately after 2 years the valve would no longer be under warranty.
WILL THIS VALVE WORK ON SP-712 SERIES OR IS THIS ITS REPLACEMENT THANKS
We would suggest the Hayward SP07122 Valve as the replacement for the Hayward SP-712 valve.
Can this also be used with salt, instead of sand?
Jacie- The SP0714T Hayward Top Mount Valve 1.5" is meant to be used with sand filters. Sand is referring to the type of filter this is used with, Salt would be the sanitizer.
My sand filter is model # S-166T. And my Vari Flo Valve says its model # SP071113. Would this be the replacement for it?
Hi Jennifer, Yes this valve is the direct replacement for the Hayward SP071113 valve.
will this fit spo704tx
Connie, SP0714T will replace SP0704TX.
I have a Hayward Pro Series model S220T. Will this valve fit my filter?
Hello, Yes it will work if you have 1.5" plumbing.
Will this work on a Poolco Model # 246RT-XL150SDBH2?
Will this valve work on a 256 t swimpro sand filter?
Yes this is the correct valve for a Hayward 256 t swimpro sand filter.
I have a s166t when I open the pool it filters great then it rains a lot I put it to waist to lower it after I noticed that I am getting sand and what ever else in pool does this mean I need to replace the spider gasket as I already replaced the lateral assembly or would you suggest replacing the valve assembly ?
Hi Kevin, Yes i would recommend changing the gasket/ Key Assembly ot the entire unit to make sure that Valve is completely sealed with no chance of leak
I have a hayward s210t pro series. Where the pressure gauge screws in is leaking. Is the sp0714t the replacement top housing I need?
Hello Bryan - The SP0714T is the correct valve for the Hayward S210T.
I have a new top mount sp0714t, when I installed it ,sand came through the input hose and into the pool, put it on backwash nothing came out,any idea's Thanks J.C
Hello, You may have plumbed the valve incorrectly. Please double check that the ports are plumbed correctly.
Is this SP0714T a replacement for a SP0714C? The waste line leaks when in filter mode.
Hi Francis, Yes the Hayward SP0714T valve is a replacement for a SP0714C valve.
my valve model # is SP0714TC. Is the SP0714T a good replacement?
Hi Jeff yes the SP0714T would be a direct replacement for your pool filter valve.
I have an older Hayward sand filter, model S170TSCP, and was wondering if this valve will work on it?
Hi Vickie, Yes this would be the correct valve for the Hayward Dreamline S170TSCP sand filter.
I have a Hayward Top Mount Valve for Sand 1.5" (SP0714T). It is leaking from the waste and I think it's the spider gasket after researching the issue. I can't seem to find the gasket. Do you sell the gasket?
Hi Tara, On the Hayward SP0714T valve the spider gasket is only sold glued into the diverter assembly. We do carry the Hayward SP0714T Spider Gasket and Diverter Assembly here.
Hi, I have a Vari-flo XL Valve, model SP714 that I need to replace because it won't turn. I'm wondering if the model "SP0714" is the same since it doesn't match exactly. Mine says it has rated pressure of 50 PSI/3.6 BAR, and Rated flow of 75 GPM/284 LPM. Is this the same model? Thanks!!
Hi Jeannie, Great question we get this one a lot, yes the Hayward SP714 and SP0714T valve would be the exact same model.
does valve assembly on hayward part Sp07141 fit Hayward model S-210T filter.
Hi Frank, Yes the SP0714T valve does fit the Hayward S210T Sand Filter.
My sand fillter motor cracked over winter. can you tell me which one I can use for a 24ft above ground pool. I currently have a hayward s-166T model on motor says tm-12 but can't find that anywhere.
Hi Tinker, You would require the TM-12 Valve for the Hayward S166T Sand Filter The TM-12 valve is a generic valve used on the Hayward S166T filter. You may also use the SP0714T valve on this page for a Hayward S166T filter. The SP0714T valve is the OEM valve made by Hayward and the TM-12 valve is a generic valve made by Praher, both valves will work.
I have a Hayward ser# 120C30 model SP714TA part number SP0714d and it is cracked can i get a replacement part for this valve instead of having to buy the whole valve assembly? Thank you.
Hi Jessica, Yes we do carry all of the Replacement Parts For The Hayward SP0714T Sand Filter Valve here.
My valve is leaking when it is in the closed position. Can I just replace the handle part or does the whole valve need to be replaced. Thank you
Hello Robert, If your valve is leaking 9 times out of 10 its going to be the spider gasket. To find the correct gasket for your valve we would need the model number of the valve or filter.
I have model number SP0714T, what adapter do I need that the hoses clamp onto, that screw into the 3 hose outlets? Do you sell them, and what size? What are they actually called?
Do u have the stricker on top of the value for replacement. Mine is faded and I can't read it.
Gail, The label for this valve is not sold separately, you'll have to replace the Key Cover And Handle Assembly in order to get a new label.
I have a SP711TXC filter valve. What would be the right replacement for this?
Frank, The Hayward SP0714T is the replacement valve for model SP711TXC.
I have a Hayward S166T sand filter. I need to replace the vari flo valve assembly. Is this the correct assembly for my filter? Does it come complete or are there other parts I need (gaskets etc.)?
The SP0714T is the correct valve for the S166T. You will not need to purchase additional parts for the valve.
Does the Hayward SP0714T come with a pressure gauge ?
Hello Michelle - The SP0714T does come with a pressure gauge.
Will the SP0714T work on my Hayward tank model S244T?
The SP0714T valve will work with the Hayward S244T filter.
Is model SP0714T the replacement valve for the Hayward S190T? Mine has "split mounting rings" which bands to the filter housing. I noticed the complete value you offer doesn't show the split rings. Not sure if its relevant or if new ones were included in the kit. BTW what is included?
The Hayward SP0714T is the correct valve for the S190T. The valve does not include the split clamp. However, it does come with the tank o-ring and pressure gauge.
My valve needs to be replaced. Is the part SP0714T correct?
The SP0714T would be the correct valve for the S210T.
My problem is that the pump is leaking at the backwash hole and now it appears that it does not do it if it is running only when it is off. I would like to see if you could help me fix it then replace it right now. Please help me attempt to fix it!
From what you've described, you will need the diverter assembly: http://www.inyopools.com/Products/07501352020282.htm
Is the Hayward Vari-Flo Valve model no. SP714 the same as your Hayward Vari-Flo Valve model no. SP0714T?
Yes, both the SP714 and the SP0714T valves are the same.
I am replacing a Hayward SP0704 valve with the SP0714T, will all the ports be in the same location?
The ports on the SP0714T are positioned differently than the ones on the SP0704 valve so will have to move the locations of the hoses.
For Hayward multi-port valve model # SP0714T, is the handle sold separately as a replacement part?
Yes, the handle is sold by itself, which is part # 4700-01X.
Does the Hayward SP0714T valve replace an older Hayward SP0704SW?
Yes, the SP0714T would replace the older SP0704SW valve
Is this the correct replacement for the Hayward S244T sand filter?
The SP0714T would be the correct valve for the Hayward S244T sand filter.
Is the Hayward model SP0714T the correct replacement for the SP711 valve?
Yes, model SP0714T is the correct replacement for the SP711 valve.
Is model SP0714T the correct replacement for the Hayward SP711 valve?
Yes, Hayward model SP0714T is the replacement valve for model SP711.
I have a leak in current multi valve near the sight glass, and want to replace it. The # on my valve is SP714A what is the direct replacement? Is it SP0714t?
Yes the direct replacement for your SP714A valve would be the SP0714T valve listed here
Is the SP714T the same as the SP0714T?
The SP714T and the SP0714T are the same exact valve.
I have a Hayward S-180T model sand filter and my owner's manual states that a SP-711-13 is the proper vari-flo control valve. I do not see this item listed anymore. What do I replace it with?
The SP711-13 which was used on the Hayward S180T has been replaced by the SP0714T listed here on this page.
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
How do I bleed air for a top mounted Hayward multiport valve? They have no air bleeder valve.
Hayward TOP mounted multiport valves do not require an air bleeder valve. They self purge air in the system through the return lines.
My Sand Filter is a Hayward S160T is the is the proper replacement valve the S160T filter?
No this is not the proper filter valve for the S160T. You may view the proper valves here >http://www.inyopools.com/pool_parts_hayward_s_160t_filter.aspx The 4707-0 is the Hayward Original valve and the 4707P is the generic replacement which will work as well.
Less than 1 hr
We removed the screws on both sides on the bottom we pulled up on it and the white Pole needs to stay in Sand filter so be careful not to pull it up with top valve we put the new one on making sure the white Pole goes inside the open hole on new valve and the hose holes are lined up where they need to be. This part has been compatible just like the customer service stated it would be. Works great no problems.
(5 out of 5 stars) Exactly the correct part I needed to put my pool filter back in operation.
Reviewed By: Superman from Clarksville, Tn ()
Pros: Easy to find the part I needed
I looked all over for this part. Many places have the part number listed, however, I was no longer available. My filter system is in its 13th year of operation and needed some updating. Happy you could help me in that mission.
(3 out of 5 stars) Top Cover Plate Failure and Modification
Reviewed By: ()
Price is good, however after running for 72 hours or so the top cover plate lifted up and exposed the top o-ring and was spraying. The problem was the six top cover plate screws are installed directly into the plastic housing and they stripped out. System was operating at 21 psi with the S166T sand filter. Removed all screws except for the one directly over the pool return port since it must be a blind bottom insert because of clearance and then after reinstalling the o-ring I used 10-24 round head machine screws 1 12" long along with flat washers top and bottom along with locknuts and nuts. Worked perfectly afterwards. I highly recommend the company to consider using machine screws with nuts instead of screws directly into the plastic housing or use metal screw inserts. I would pay a few dollars extra for this modification.
(5 out of 5 stars) Top mount valve 1.5 HP great product
Reviewed By: ()
This match's up to my Hayward Vari-Flo XL just like customer service told me it would. Works great, no problems, great price, easy to change by yourself and I'm a woman. And you receive the part immediately. The best customer service ever. God bless this company.