Details

Top

Model # 94027210

Product Description

PureLine Prime Pump

  • Exclusive Ring-Lok access to remove motor from the pump's wet end.  No Tools needed!
  • Quieter operation, Energy Efficient Motor
  • Built in base, Built in Influent Check Valve
  • Patented air-cooled heat sink allows pump to run dry without damage!
  • Floating eye seal between closed pump impeller and diffuser maximizes efficiency.
  • One-piece case with two convenient drain plugs for winterizing. Built in unions for easy installation.
  • Higher suction port for faster self-priming.
  • 180 cubic inch strainer basket allows longer intervals between cleaning. Clear lid allows view.

Dimensions of the Jacuzzi Magnum Force pump
             jacuzzi_magnum_dimensions.jpg (11973 bytes)

Performance of the Jacuzzi Magnum Force pump

Gallons per Minute vs. Resistance to Flow (Feet to Head)

Horsepower

30ft.

40ft

50ft

60ft

70ft

80ft

90ft

100ft

3/4 HP

55gpm

46

34

15

-

-

-

-

1.0 HP

74

68

62

54

45

33

-

-

1.5 HP

85

79

72

65

56

43

-

-

2.0 HP

-

108

99

90

80

69

51

31

2.5 HP

-

120

111

102

92

80

67

52

Click here for more Jacuzzi Pumps

Product Specifications

HP:
1 HP
Speed:
Dual
Volts:
230
Port Size:
2 in.
Service Factor:
1.5
RPM:
3450/1725 RPM
Amps:
6.5 - 2.5
Top

?     Asked on 7/8/2017 by

i need to replace a pool motor plus pump. The motor is a Century Centurion and the pump is a Jacuzzi - Magnum Force. The manufactures label for the motor shows 2.0 HP, but there is also a label that shows Total HP = 2.4. Question - what actual HP do i need? Thanks

A     Answered on 7/10/2017 by InyoPools Product Specialist Joe S.

Yes if you have a 2hp motor with a higher Service Factor then you would go with this unit. You can also go with Magnum Force V Series 2.7HP Variable Speed Pump (VMF-S2) - 94026140

?     Asked on 6/8/2015 by

Does this pump have a switch on the back of the motor to control the hi/lo speed? Would it be a good replacement for my jacuzzi magnum # 1mf-s 94026110 with an a.o. smith 1.5 hp 1.30 sf single speed pump? This is for a 13k gal in ground vinyl pool. Thanks

A     Answered on 6/9/2015 by InyoPools Product Specialist Patrick P.

The Jacuzzi Magnum dual speed pump does not come with a manual hi/low toggle swith as it is designed to be controlled remotely through a timer. If you have standard yellow dial timer then you would install a T106R Dual Speed Pump Timer. Your current timer would power the pump on and off and the T106R timer would do the switching between the high and low speeds. This would be a great replacement for your current Jacuzzi Magnum pump. Another option would be to just replace your current motor with a Dual Speed Motor W/ Digital Timer, the nice thing about this approach is that there is a digital timer built right on top of the motor meaning the extra T106R timer is not required.

?     Asked on 1/21/2013 by Guest

Do you sell unions for the Jacuzzi Magnum Force pump?

A     Answered on 1/21/2013 by InyoPools Product Specialist Patrick P.

The unions would be key #26 on this parts breakdown.  The difference between the two is the pipe size (either 1.5" or 2").

Top

Review Summary

  (Average 0 out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)