Pool Motor Round Flange 1 HP Full Rate Dual Speed w/ Digital Controller - B975T

THIS PRODUCT IS OUT OF STOCK FOR THE SEASON

Part # B975T

By Century Motors

  4.8 Average  

Details

Top

Part # B975T

Warranty 1 Year

Alternate Part #'s 177060T, B2975T

Product Description

Premium-Efficiency 2-Speed Pool Motor with Integrated Timer

A. O. Smith’s new 2Green two-speed premium efficiency replacement pump motor with integrated timer packs tremendous value into an easy to- nstall package. Energy efficiency continues to drive the needs of the pool market, from legislation to increased awareness of energy costs and environmental impact. And thanks to the 2Green’s energy efficient high and low speed windings paired with an onboard timer interface, energy consumption can be reduced by as much as 58% over single speed motors. The all-in-one integrated motor and timer means less work for an installer and maximum energy savings for pool and spa owners. A. O. Smith’s 2Green is Title 20 compliant** and best of all, there is no additional wiring required for new construction or retrofit installations!

*California’s Title 20 legislation states that pumps > 1HP (total) must be 2-speed or variable speed, and must have a control to default to low-speed (i.e. timer)

Features Benefits
All-in-one design with integrated motor and timer as one unit No additional wiring required! – other aftermarket
timers require external leads and can be wired
incorrectly
Rain-proof timer enclosure Other aftermarket timers require a secondary enclosure
for outdoor use of the electronics
On-screen motor status updates Unique feature that provides user feedback (if the shaft
is locked for instance) which can reduce motor failures;
shows the mode (high, low, off) and time remaining
Built-in battery backup protects
programming for 7 full years
No need to replace battery (unlike other timers) or
reset time/settings during a power outage or off-season
Integrated LCD backlight and
adjustable contrast
Ensures the display can easily be viewed in dark, shady, or direct sunlight conditions
Intuitive step-by-step screen instructions Step-by-step instructions make initial setup and any
future programming changes simple
Manual override User can instantly change motor parameters for cleaning or maintenance without adjusting permanent settings

Product Specifications

Commonly Used On:
Hayward Super Pump, Super II Pump & Max-Flo Pumps
HP:
1.0/.12 HP
Speed:
2 Speed
RPM:
3450/1750 RPM
Amps:
6.3/2.3 amp
Service Factor:
1.40
Total HP:
1.40 HP
Frame:
56J
Stock #:
B2975T
Shaft:
Threaded
Volts:
230 V
Flange:
Round
Timer:
Digital
Notes:
California Title 20 Compliant
Top

?     Asked on 2/4/2019 by Tom Martens

What would be the correct 2-speed motor replacement of a single speed century c48ab47a01 ? I would also need a gasket and shaft seal i guess. Anything else? The impeller looks good. Thanks
 Reply

A  Answered on 2/5/2019 by InyoPools Product Specialist Lennox H.

Hi, Tom. This B975T is a suitable replacement for the C48AB47A01 motor. We will need to know the pump housing model in order to locate the seals. 
 Reply


?     Asked on 12/11/2018 by Manny Gonzalez

I have a AO Smith Century Centurion pump motor used in a Pentair pump. The motor died and needs to be replaced. The motor part # 7-177451-03; Serial BZ06-16; type CX; Frame Y56Y; 208-230V; 9.6-8.8 amps; 1081 pool pump duty mount w/ vent holes down71315. I would like to replace this with a 2-speed pump, what do you recommend as a replacement.
 Reply

A  Answered on 12/12/2018 by InyoPools Product Specialist Hector F.

The replacement dual speed motor would be model B983 and you could use one of two switches for the dual speed. One is a manual toggle switch being part number 2512558-001 and the second is a timer part number T106R that you would wire to the main timer assuming that you currently have one. 
 Reply


?     Asked on 9/25/2018 by John H

I recently installed model B2975T 2 speed motor to replace a 3/4 hp motor. Do I need to upgrade my current Hayward filter model C250 (the filter is 20 yrs. old)? Will my old filter handle the increase?
 Reply

A  Answered on 9/25/2018 by InyoPools Product Specialist Lennox H.

Hi, John H. You will not need to replace your filter if the pump's impeller was not changed also. 
 Reply


?     Asked on 9/15/2018 by Brock

Will this work as a replacement for Hayward pump #C48K2N143B1. If so which model do I need the B975T or B2975T.
 Reply

A  Answered on 9/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Brock. Yes, this B2975T motor can be used to replace MOD C48K2N143B1.
 Reply


?     Asked on 9/11/2018 by

Do i need a new gokit/seal kit also or does this come with new seals etc to match to an sp3015eeaz pump. Thanks.
 Reply

A  Answered on 9/11/2018 by InyoPools Product Specialist Hector F.

So in order to cross reference the correct seals or the seal kit, you will need to provide the front pump housing model number or name that the motor bolts to. If that information is no longer legible then you can always email us a few images of them to upload@inyopools.com so we can try and identify that for you. 
 Reply


?     Asked on 4/3/2018 by Phil

What is the warranty on this unit? Are spare parts readily available? Has this model been discontinued?
 Reply

A  Answered on 4/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Phil. This motor has a (1) Year Warranty. Replacement parts are not available for this unit and these are being phased out. 
 Reply


?     Asked on 11/4/2017 by Larry

Will this motor replace a CT1102 Design 1081 Model #K48L2N100A1
 Reply

A  Answered on 11/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Larry. This 2-Green - B975T Motor can be used as a replacement for the CT1102 motor. 
 Reply


?     Asked on 10/17/2017 by Nick

I'm replacing a Century Centurion Part #7-193985-04 with whining bearings. Want to use a two speed w/timer. Mating to Jandy STEALTH model SHPM1.0. Which is the right replacement motor?
 Reply

A  Answered on 10/17/2017 by InyoPools Product Specialist Lennox H.

Hi, Nick. You can use either the B2980T or B2982T dual speed motors. The B2982T will give you a higher flow rate on low speed. 
 Reply


?     Asked on 6/25/2017 by Christopher

I want to downgrade my current pump. I have a Hayward super 2 pump with a 2 Hp motor. SP3020. My pool is only 10,000 gallons with a 2" connection and 18 ft head. Can i change to the 1 hp two speed and change the impeller. 80 gpm is plenty I think and the current pump is overrated. Original owner got sold this setup. Is this the right idea?
 Reply

A  Answered on 7/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Christopher. You can downgrade the pump to match this motor. You will also to replace the Impeller - SPX3010C, Impeller Ring - SPX3005R, Diffuser - SPX3021B, and Seals GOKIT2 or GOKIT2SALT which will add up.  
 Reply


?     Asked on 6/16/2017 by Peter Stewart

I ordered and received the "1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T, B2975T)" as replacement motor for my Hayward Super II pump. I plan to install it tomorrow but am concerned since my current motor is a 56J style flange and this motor is a 56C and want to ensure this style will bolt up to my pump! Can you verify this for me before I take my pump apart that this will bolt right up to my pump?
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Alex V.

Peter, This motor is a 56J frame. A 56C is a keyed shaft and does not have a threaded shaft. 
 Reply


?     Asked on 5/29/2017 by Roy

I have a flotec model AT251001-01pump with a 1hp A O Smith motor (# C48J2PA105C1), 1 1/2" plumbing in ground 15000 gal pool. Wanting to go to a 2 speed motor. Found your B987T. Is this the right one? Also what is the difference between B975T and B2975T? and what is price of each? What estimate of energy savings between my single speed and the B975T/ b2975T?
 Reply

A  Answered on 5/29/2017 by InyoPools Product Specialist Patrick P.

Hi Roy, The B2982T is the correct replacement motor for your pump. The B982T and B2982T is the same motor, the B2 model is the model that is currently being shipped out and the 2 designates it is the new model which has a few internal upgrades to the motor. We still notate the B2982T motor as people may have that motor on there pool currently and this motor is the replacement for that model #. Normally we estimate that you would see a 40% - 50% operational cost savings by using the dual speed motor vs. a standard single speed motor.
 Reply


?     Asked on 5/16/2017 by Paul

I have a Super Pump SP1500Z1 and a 1 HP C48K2N143B1. I want to replace the motor with the B975T, B2975T but will I need to buy a new impeller along with the tune up kit?
 Reply

A  Answered on 5/17/2017 by InyoPools Product Specialist Hector F.

If you would like to get the full strength out of the motor then yes you should replace the impeller to the part number 5110-10DA. But if your filter model can not handle the extra water flow you would be getting since you are technically using a stronger motor then I would not advise to use this model motor and yet use the model B973T which only uses 110 volt.
 Reply


?     Asked on 4/30/2017 by

Ok so what is the shaft p/n and cost
 Reply

A  Answered on 4/30/2017 by InyoPools Product Specialist Scott W.

That is going to depend on your pump model not your motor. If you provide your pump model or attach a picture of your complete pump so I can identify your pump and recommend the correct shaft seal.
 Reply


?     Asked on 4/30/2017 by

I have a humming pump B228SE 1HP I opened pool 3 weeks ago and it started right up. This is a 2 year old pump. I am now considering upgrading but have few $ what do you recommend
 Reply

A  Answered on 4/30/2017 by InyoPools Product Specialist Scott W.

Are you looking to direct replace your motor, upgrade to a dual or variable speed motor? Whatever you choose you need to replace the shaft seal as well.
 Reply


?     Asked on 4/14/2017 by Jim T

Hi I have an older Hayward superpump that is getting quite loud and wanted to explore my options. The motor at present is a Century B228SE 1hp. running on 220vac. Thoughts?
 Reply

A  Answered on 4/14/2017 by InyoPools Product Specialist Scott W.

You can either do a direct replacement with the B228SE, go to a dual speed replacement with the B973T, or go to a variable speed replacement with the ECM16CU. The best energy efficient option is the variable speed motor. With any option you will need the seal kit, part number GOKIT3.
 Reply


?     Asked on 4/13/2017 by

I have a Jandy JHPU 1.5 with (I think) the B229SE (#7-193632-24). Will this B975T work as a drop-in replacement?
 Reply

A  Answered on 4/13/2017 by InyoPools Product Specialist Scott W.

The B975T is a suitable replacement motor and the shaft seal for your motor install is part number 5020-009.
 Reply


?     Asked on 3/7/2017 by

I currently have a century HST110 TWHP 1.10 13.6 amp 115/230-what's a good replacement in a 2 speed or variable speed?
 Reply

A  Answered on 3/8/2017 by InyoPools Product Specialist Lennox H.

Hi, You can use this B975T 2-Green Motor or the ECM16CU V-Green Motor as a replacement for the HST110 motor.
 Reply


?     Asked on 2/20/2017 by Robert

I am looking to replace my pool pump. i have a AO Smith. Model K48L2N104. SerNo. 8L05. 1 HP. FR 56J, Amps 14.6/7.3. Volts 115/230. AMB 50. I want a more energy efficient pump. Should i replace the pump motor or the whole pump. please let me know the best situation. i want to save on my bill..
 Reply

A  Answered on 2/20/2017 by InyoPools Product Specialist Alan M.

The replacement motor for model #K48L2N104 is the Energy Efficient A.O. Smith Round Flange 1 HP Full Rate Motor - CT1102. The only better motor that this one would be a 1.65 HP Variable Speed Pool Pump Motor Round Flange - ECM16CU or a 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T). You can always replace the whole pump, but the most cost effective way to go would be to replace the motor and seals.
 Reply


?     Asked on 12/10/2016 by gene spruill

MY TIMER SAYS FAULTY TIMER. WHAT IS WRONG? can I fix it. This is my second pump w/timer
 Reply

A  Answered on 12/12/2016 by InyoPools Product Specialist Lennox H.

Hi, Gene. Unfortunately, there is no way to fix a faulty timer within the motor. You will have to replace the entire motor.
 Reply


?     Asked on 12/3/2016 by Tom

I made a mistake on my previous question. I am running a C48K2N143B1 motor on a Hayward pump with a SP2607C impeller. What is the best 2 speed motor without having to change the wiring.
 Reply

A  Answered on 12/5/2016 by InyoPools Product Specialist Stacey M.

Hello Tom, based on your impeller it shows you have a Hayward Max-Flo Parts for your seal kit it would be GOKIT1 and the b975t is hooked for a 230v for 2 speed. Please let us know if this is worked for you, if you are not hooked for 230v then this motor will not work.
 Reply


?     Asked on 12/3/2016 by Tom

I have a C48k2n143B1 motor running on 115V. on a Hayward SP 1600 pump housing with a SP2600C impeller. What is the best 2 speed or variable speed replacement motor without having to change the wiring and what impeller should be used?
 Reply

A  Answered on 12/5/2016 by InyoPools Product Specialist Lennox H.

Hi, Tom. Since you're using 115 volts the 2-Green Motor (B973T) along with the SP2607C impeller are the parts that you can use. The variable speed motor is 230 volts only.
 Reply


?     Asked on 10/13/2016 by Matt S.

Is the appropriate method of shutting down for the winter season simply to cut power to the motor? (I can't seem to find any permanent "Off" or Winter Mode in the controls, so I assume the timer will be attempting to cycle things On/Off each day)
 Reply

A  Answered on 10/13/2016 by InyoPools Product Specialist Alan M.

Hello Matt- Here is a great link on How To Winterize Your Swimming Pool. This should answer the majority of your questions. As far as turning off your pump, let me first assume you have a timer on your pump. If you want to completely shut the pump off you can either flip the breaker off or you can turn the timer off and remove the on timer pin. If you want to gradually reduce the run time, you can adjust the timer to reflect shorter run times.
 Reply


?     Asked on 9/29/2016 by Gary

I have an ao smith 1hp K48l2n104 motor and hayward sp3010eeaz pump withan sp3010c impeller, will the B2975t work with this or will i need a bit smaller impeller for the lower speed?
 Reply

A  Answered on 9/29/2016 by InyoPools Product Specialist Megan C.

Hello, Gary. The 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T) is safe to use with the impeller installed on the SP3010EEAZ pump. I do recommend replacing the Tune-up/GoKit for the Super II pump, when replacing the motor.
 Reply


?     Asked on 9/24/2016 by Steve

I have an AO Smith UST1102 Frame 56J Model C48K2N143C1C 1 hp capacity start, what is a direct fit 2 speed green motor replacement? Thanks
 Reply

A  Answered on 9/30/2016 by InyoPools Product Specialist Scott W.

The replacement dual speed motor you would replace the UST1102 is the B973T, which has the same total horsepower.
 Reply


?     Asked on 8/16/2016 by Eddie

I need to replace my pump motor on my pool pump Hayward sp2610x15. I am wanting the 2 speed integrated timer more efficient motor. Is this the motor I need? Thanks
 Reply

A  Answered on 8/19/2016 by InyoPools Product Specialist Lennox H.

Hi Eddie, This B975T is the correct motor that can be used with the SP2610X15 pump. I will also recommend getting the Hayward Super Pump Tune Up Kit GOKIT3 or GOKIT3SALT.
 Reply


?     Asked on 8/12/2016 by Michael

How many gallons per minute on low and high settings does this pump pump?
 Reply

A  Answered on 8/12/2016 by InyoPools Product Specialist Scott W.

That is going to be the motor. I'll need to know what model pump you have (Super Pump, Super 2, etc) as well as your total resistance, which is the distance in feet from where your pump is to your main drain. This is how I figure out the estimated flow rate of a pump.
 Reply


?     Asked on 7/8/2016 by Ted

Looking to replace my Hayward C48K2N143B1 that is currently hooked up 115v. Do I have to use this, or could I get away with the B973T instead which can be hooked up to 115v. Otherwise I'll need to get an electrician out to run a new circuit.
 Reply

A  Answered on 7/13/2016 by InyoPools Product Specialist Lennox H.

Hi Ted, The B973T is the motor you will need based on the info provided.
 Reply


?     Asked on 5/26/2016 by Rob

I want to replace my Hayward superpump motor (3/4hp, 230v, SF 1.0, 56j frame, 60htz). It powers a pump model Hayward SP2605x7. Can I replace with 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T)? Thanks.
 Reply

A  Answered on 5/26/2016 by InyoPools Product Specialist Dennis R.

Rob - Actual or Total HP (THP) of a motor is calculated by multiplying its stated HP by it Service Factor (SF). You will be going from a 3/4 HP uprated motor with a THP of 3/4 (3/4 x 1.0 SF) to a 1 HP full rated motor with a THP of 1.4 (1.0 x 1.4 SF). That almost doubles the size of the motor. The impeller in your current pump needs to be replaced with a larger one - spx2610c. The current diffuser will accommodate the larger impeller. You will also want to replace the motor shaft seal and gaskets - GOKIT3.
 Reply


?     Asked on 5/26/2016 by Rob

I want to replace my Hayward superpump motor (3/4hp, 230v, SF 1.0, 56j frame, 60htz). It powers a pump model Hayward SP2605x7. Can I replace with 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T)? Thanks.
 Reply

A  Answered on 5/26/2016 by InyoPools Product Specialist Lennox H.

Hi Rob, You can replace your 3/4hp motor with a 1hp full rate but I would not recommend doing that unless you confirm that you system can handle the additional water flow. Going from a 3/4hp up-rate motor to a 1hp full-rate motor you're doubling the hp. You will  also need to replace the impeller diffuser and the seals or you can replace you pump with the PureLine PL2607.
 Reply


?     Asked on 5/25/2016 by

can this pump replace c48l2n134b3
 Reply

A  Answered on 5/25/2016 by InyoPools Product Specialist Patrick P.

Yes this motor as well can replace the c48l2n134b3 motor.
 Reply


?     Asked on 2/27/2016 by DAVID

can i use this motor to replace a 1 hp U.S. Motor model #K63CXEPY-4766 with a 56J frame
 Reply

A  Answered on 2/29/2016 by InyoPools Product Specialist Lennox H.

Hi David, This motor will the U.S. Motor model #K63CXEPY-4766.
 Reply


?     Asked on 9/26/2015 by CARL JEFFRIES

Can I replace my single 1hp motor #C48L2N134C2 WITH THIS 2 SPPED MOTOR? WHAT MODEL NUMBER WOULD I USE? CAN I REPLACE MY EXISTING SINGLE MOTOR WITH THE $399 VS MOTOR? Which modle # would I use?
 Reply

A  Answered on 10/1/2015 by InyoPools Product Specialist Lennox H.

Hi Carl, The 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T) or the 1.65 HP Variable Speed Pool Pump Motor Round Flange (ECM16CU) will be suitable replacement for your single speed 1 HP Motor # C48L2N134C2.
 Reply


?     Asked on 9/13/2015 by Tim

I have a Leslie's Hydramax II Magnetek Century Centurion Motor SP1610-Z-1-BEP (part no. 10.182260-04). Will this pump work for my application or would it be a better move to go with the direct replacement? Thanks in advance! Tim
 Reply

A  Answered on 9/17/2015 by InyoPools Product Specialist Lennox H.

Hi Tim, The 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T) would replace the current motor that you have. I would also recommend getting the Hayward Super II Pump Tune Up Kit, which can also be used for the Leslie's Hydromax II Pump.
 Reply


?     Asked on 8/24/2015 by Chris

Need to replace motor on an SP1607X10, is this the right one? Current motor looks to be: a Leland-Faraday M-584
 Reply

A  Answered on 8/25/2015 by InyoPools Product Specialist Lennox H.

Hi Chris, In order to use the 1 HP Full Rate Two Speed Motor W/ Timer you would need to get the 1-1/2 H.P. Drive Train Upgrade (SPX2610CKIT) because you have a 1 hp max rated SP1607X10 model pump, the 1 HP Full Rate Two Speed Motor (B975T) is a full rated motor so the total HP is 1.4. The impeller for the SP1600 Series is not available so you will need to upgrade to the SP2600 Series. 
 Reply


?     Asked on 8/17/2015 by david

I have a k48l2n104 will the 2 green motor work for my rs1000 pump
 Reply

A  Answered on 8/17/2015 by InyoPools Product Specialist Hector F.

Yes this 2 speed motor will replace the current motor that you have.
 Reply


?     Asked on 7/31/2015 by

I need to replace a Hayward Super Pump 1hp motor. Model C48K2N143B1. Will this motor work for me?
 Reply

A  Answered on 8/3/2015 by InyoPools Product Specialist Lennox H.

Hi, The 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T) will work but you will have to change your impeller to the Hayward Impeller (SPX2610C) and you will need a Hayward Super Pump Tune Up Kit.
 Reply


?     Asked on 7/27/2015 by JanGG

Hi, I have a Hayward Super 2, 1hp pump. Would I have to change the impellor size with this pump? Thanks
 Reply

A  Answered on 7/27/2015 by InyoPools Product Specialist Hector F.

This would depend on whether you have a full or uprate model pump, diffuser and impeller. Its wisest to check all of these part numbers to make sure they are compatible with this two speed motor.
 Reply


?     Asked on 6/19/2015 by Cathy

Hi, what is the difference between the B975T and the B2975T? I read another person's comments that the B2975T was more efficient. How do I specify I want the B2975T over the B975T.
 Reply

A  Answered on 6/19/2015 by InyoPools Product Specialist Dennis R.

Hi Cathy - B975T and the B2975T are alternative part numbers referring to the same motor. There is no difference.
 Reply


?     Asked on 6/9/2015 by Thomas

I'm looking to replace my ST1102/56J (Motor Mod C48L2N134C2) 1 HP Motor. Do you know if this is a perfect replacement? If you need anymore info, please let me know.
 Reply

A  Answered on 6/9/2015 by InyoPools Product Specialist Patrick P.

Hi Thomas yes this would be a perfect dual speed motor replacement for your ST1102/56J (Motor Mod C48L2N134C2) 1 HP Motor.
 Reply


?     Asked on 6/6/2015 by Cliff

Will this motor work with a Jacuzzi Magnum Pump? Current motor is Emerson EB228 1hp, 56J, 115/230. Also, is a separate switch required to be installed to change speeds?
 Reply

A  Answered on 6/6/2015 by InyoPools Product Specialist Joe S.

yes this motor will fit your Jacuzzi Magnum pump. The motor comes with a built in timer and has controls to go between high and low
 Reply


?     Asked on 6/5/2015 by andrew

can this motor be wired for 110 GFI outlet
 Reply

A  Answered on 6/6/2015 by InyoPools Product Specialist Matt S.

Hello Andrew, No it can not be wired for 110 voltage, this is a 230 voltage only motor.
 Reply


?     Asked on 5/28/2015 by Jenna

Do you have this motor available with a Square Flange?
 Reply

A  Answered on 5/28/2015 by InyoPools Product Specialist Patrick P.

Hi Jenna, Yes we do have this 1 HP Dual Speed Motor in a Square Flange here.
 Reply


?     Asked on 5/28/2015 by Jenna

Is this motor for an inground pool & can it be hardwired? If not, do you have a similar one available for an inground pool. Thank you.
 Reply

A  Answered on 5/28/2015 by InyoPools Product Specialist Patrick P.

Hi Jenna, this motor is designed for an inground pool and can be hard wired.
 Reply


?     Asked on 5/27/2015 by Marcos

Hello, I have the common 1 HP Hayward Super Pump, which has been making a high pitch noise for the past few years. This year it was seized up and I had to take it apart. Inside the pump housing a found a colony of ants (and uncles) that had to be evicted. I unfroze the shaft with a state-of-the-art water pump pliers, and it is working, but its still noisy. I wish to upgrade to a more efficient pump. Will this pump fit my current setup? Thank you.
 Reply

A  Answered on 5/27/2015 by InyoPools Product Specialist Patrick P.

Hi Marcos yes this dual speed motor would be a great energy-efficient upgrade to your current motor. I would also suggest a Hayward Tune Up Kit when you do this motor replacement.
 Reply


?     Asked on 5/27/2015 by Del

I have a Hayward super pump 1.5 HP single speed. Would like to replace the motor only, no timer, with the same super pump, but with a 2 speed. Will this fit my current pump housing? Any special wiring modification? Special 220 power cord? I have separate 110 & 220 outlets by my pump. Current pump is plugged to 220. Thanks.
 Reply

A  Answered on 5/27/2015 by InyoPools Product Specialist Patrick P.

Hi Del, I would suggest the 1 HP Full Rate Dual Speed Motor W/ Digital Timer the reason I suggest the 1 HP and not the 1-1/2 HP is because... the Hayward Super Pump uses a 1-1/2 HP uprated motor which would be identical to a 1 HP full rate motor.  The dual speed motor referenced above will fit your current housing and you should be able to use your current 220V plug. When replacing your motor I would suggest a Hayward Super Pump Tune Up Kit. This motor would not need a special timer as it has has a built in digital timer right on the motor.
 Reply


?     Asked on 3/21/2015 by JOE

WHAT IS THE WARRANTY? IF NEEDED WHO SERVICES THE PUMP IF IT FAILS? HOW LONG DOES IT TAKE TO RECOUP THE EXTRA MONEY SPENT ON THIS PUMP.
 Reply

A  Answered on 3/23/2015 by InyoPools Product Specialist Robert M.

Joe - The warranty is one year. If the motor fails within the first year because of manufacturer defects, we will replace the motor. You can take the motor to an electrical repair shop if it is outside of one year.  The time it takes to recoup the money depends on your kwh cost. This guide will help you calculate the cost to run the motor.
 Reply


?     Asked on 4/24/2013 by Guest

Can the timer on the motor be removed to mount on a wall?
 Reply

A  Answered on 4/24/2013 by InyoPools Product Specialist Patrick P.

Unfortunately the timer control on the motor is permanently attached to the motor and can not be removed.
 Reply


Top

Review Summary

 (Average 4.8  out of 5 stars)
10 Rating
5 star:
 
(8)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews