Neverlube 2 Way Valve 1 1/2 Inside / 2 Outside - 4724



Part # 4724

By Jandy

  4.56 Average  



Part # 4724

Product Description

Jandy NeverLube Valves are designed for durability and backed by a lifetime guarantee.  Rigorous quality control checks are used to ensure these valves will not leak, break, melt, lose pressure or slip.


  • Maintenance free
  • Never requires lubrication
  • Designed for easy automation
  • Can be used with a number of valve actuators
  • Innovative 2-port design
  • Ports accept 1-1/2" pipe inside and 2” pipe outside
  • Constructed of temperature and chemical resistant CPVC material

Click here for more Jandy Valves

Product Specifications

Inside Diameter:
1 1/2 in.
2 Way
Outside Diameter:
2 in.

?     Asked on 10/24/2015 by neil

how to switch off actuator

A     Answered on 10/26/2015 by Lennox H.

Hi Neil, If you have the Jandy Actuator, you'll have to move toggle switch located on the bottom of actuator to the OFF (center) position.

?     Asked on 9/23/2014 by Guest

I have this valve installed at my pump. I have a lot of air coming out of the pool jets and it doesn't stop. If I rotate the valve to vacuum and back to skimmer, it clears the air immediately. Do you have any suggestions?

A     Answered on 9/23/2014 by Patrick P.

I would recommend checking the gaskets/o-rings on the valve and pump housing. They may be letting air into the system.

?     Asked on 1/23/2012 by Guest

Why do the Jandy valves list ID and OD for each valve?

A     Answered on 1/23/2012 by Patrick P.

Each Jandy valve is designed to connect to two different size pipes. For example on a valve shown with ID 1 1/2" and OD 2", a 1 1/2" pipe can be glued inside the port or a 2" pipe can be glued on the outside of the port.

?     Asked on 4/9/2007 by Guest

What is the overall length of this valve, from inlet to outlet?

A     Answered on 4/9/2007 by Patrick P.

The length is 6.5" from end to end.


Review Summary

  (Average 4.56 out of 5 stars)
9 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

3     0

 (5 out of 5 stars)  Jandy Valve

from Anthony, NM ()

Pros: Eaxctly as described

Cons: None

I needed a replacement for some internal parts and the Inyo Pool price for the ENTIRE valve was less than the total for the indiidual parts!

Was this review helpful to you? 

The Most Recent Reviews

 (5 out of 5 stars)  Jandy never lube valve

from Lockport, iIlinois ()

Pros: easy to operate, and easy access to valve body

Cons: none

Excellant product, I have been installing inground swimmming pools for over 30 years. These two port valve allows you to isolate each line while winterizing at the end of the season

Was this review helpful to you? 

 (5 out of 5 stars)  Jandy valve

from Grand Prairie, TX ()

Cons: none

Well, it's a Jandy valve and it works as expected.

Was this review helpful to you? 

0     1

 (2 out of 5 stars)  Jandy valve

from Copperopolis, CA ()

The product is good but was poorly marked on the wensite resulting in a return that cost a 15% stocking fee plus shipping. It would have been cheaper to run over it in my car. The actual valve I wanted and bought on round two is very good.

Was this review helpful to you? 

 (5 out of 5 stars)  

from Jacksonville, FL ()

Pros: Easy turn

Cons: none

As always INYO pools delivered quickly at a great price. The neverlube valve is awesome because it never gets tough to turn so you don't have to worry at all!

Was this review helpful to you? 

 (5 out of 5 stars)  The Only Way To Go

from South Florida ()

Pros: Ease of use and installation

Cons: A little pricey

While Jandy valves may be a bit pricey compared to other alternatives, you get what you pay for. They are very easy to install yourself, and are very smooth and durable to operate.

Was this review helpful to you?