Part # BN24
Alternate Part #'s 158272, 158273, 159793, 159842, 159849, 159862, 159966, 164159, 164246, 164247, 164921, 164952, 165375, 165376, 165965, 168363, 168364, 168478, 173118, 173135, 176166, 176507, 177613, 177719, 177733, 177746, 177893, 177954, 177954PJ, 177960, 182267, 182519, 182717, 182832, 184394, 186111, 186127, 186533, 186883, 187610, 18889, 193261, 193389, 193425, 193769, 196034, 1D158, 1D161, 310P144, 310P170, 317P125, 317P236, 317P291, 317P357, 317P394, 317P397, 317P409, 317P478, 35-6471, 5KC39JN2895X, 9010-1189-R, 90100625, 90101197, agl75fl1, B024, B028, BN-24SS, BN24, BN24SS, BN24V1, C1453, CBT2072, H639, H666, H909, JBT2072, M-197AG, MTG-H639, S48AA10A01, S48B73A03, S48B83A15, S48B83Z01, S48B88B95, S48E48A04, S48J2A14A1, S48J2A18A1, S48J2A5A4, S48K2A1, S48K2A12, S48K2A2, S48K2A2A1, S48K2A2A2, S48K2A3, S48K2A30, S48K2A30A1, S48K2A30A2, S48K2A38A1, S48K2A4, S48K2A45, S48K2A45A1, S48K2A45A2, S48K2A45E1, S48K2A4A2, S48K2A5, S48K2A5A2, S48K2A5A3, S48K2A5A4, S48K2A5A7, S48K2A7, S48K2A8, SP1510Z1E, SP1510Z1ET, SP1510Z1T, SP1510Z1TBK, SPL75FL1, SPX1510Z1E
Application: Above Ground Pools & Spas Replaces: Sta-Rite, Hayward, American Products, Hydra Bath, Pac Fab, Jacuzzi, Doughboy, Etc... Features: All copper windings, Auto protector, Open drip proof, Stainless steel threaded shaft, Thrubolt pump mount, "1081" design, 60 HZ , 115V, Full load Amps = 9.8, Frame 48Y, Threaded Shaft
I have a dyna-mite #dynt-n1-3/4 and I need an air pump, pres:ait-trol21a 250 vac,m 1hp 125vac 2 hp vac tva111a Would you have one in stock, or be able to obtain one for me? Thanks. Sydney
Hi, Sydney. The Air Switch, Maintained, Spdt - TVA111B can be used as a replacement.
is this the correct replacement for a hayward model S48E48A04
Good day Denis, Yes BN24 will be the replacement for S48E48A04.
Is this the replacement motor for: Teel 4RJ90 S/N S48B73A03
HI, Adan. Yes, this BN24 motor will fit the Teel 4RJ90 pump.
what is the correct replacemnt motor for an a. o. smith westinghouse haward motor SP1500-Z-1. thank you
Hi, Alan. Based on the info I've located, the replacement for the SP1500-Z-1 motor is the BN23 motor.
Is this the right pump to replace my Hayward model c48j2n131b1
No, the correct replacement motor model would be the UST1102.
is this a replacement for a Waterway HI-FLO motor Serial Number SD 0906107677 part no. sd-10-1n11cb
Hi, Joe. The BN24 motor is the correct replacement motor used with the Waterway SD-10-1N11CB pumps.
is this the correct replacement motor for the magnetex b024 3/4 h 115 volt motor
Hello Jay, Yes this is a correct replacement for Magnetex b024 3/4 h 115 volt motor, this model is just a AO Smith.
Will this motor work as a replacement for a Ultra Jet PUUFSCAS1098GR (GE motor 5KH36JN3632BX)?
Hi Jay, The BN24 is the correct replacement motor for the Ultra Jet PUUFSCAS1098GR pump.
Does this motor come with a power cord?
No, this motor does not come with a power cord. You may remove the cord from your old motor and install on this one.
When replacing the motor, what else do I need to replace with it? Do I need a new shift seal, etc.?
We do recommend for at least the shaft seal to be replaced but would need the model of the front pump housing that the motor is bolted to in order to cross reference that seal.
Need a motor for Dynamo 340103. Motor part number S48AA47A03R. Pretty sure the BN24V1 is the right replacement?
Hi KB, The 3/4 HP 115V Thru Bolt Motor will be the correct replacement for your Pentair Dynamo Pump 340103. BN24V1 is also one of the many alternate part #'s that would cross reference to this replacement motor.
I am looking for a 3/4 HP Century Pool Jetted tub Motor The brand is MagneTek Cat # B024 volts 115 part 7-159966-25
The replacement motor that you would need is this BN24SS.
It seems that I need to remove the motor from the housing to possibly remove the capacitor . Is this so ?
You should not have to. The capacitor should be accessible just from the back. It will, however, make it much simpler to work on if removed from the housing.
does model ezbn24 have a capacitor
This motor does not have a run capacitor. If it has a start capacitor, you will see it by taking off the electrical cover in the back of the motor.
Do I need to replace the impeller as well
It is only needed to replace the inpeller if it is cracked or worn. It is how ever recommend to replace the motor shaft seal.
I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help.
Why should I purchase a Tune Up Kit?
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Why do I need to purchase a new shaft seal?
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
What is Service Factor?
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
(4 out of 5 stars) pool pump motor
Reviewed By: granny annie from kimball, mn ()
Pros: Easy to order and reasonable delivery time.
Reasonable delivery time. It would have been helpful if there had been suggestions that we needed to also change seals and gaskets. When we got into replacing the motor, there were more parts that we needed to get--so more down time on our pool pump.
(5 out of 5 stars) A perfect replacement
Reviewed By: Dawn H. from Kathleen, GA ()
Pros: Bolt-for-bolt match to the old motor.
Perfect replacement for the existing motor. Pump housing bolted off the old and onto the new. Drilled a hole in the rear plastic cover to accomodate the pneumatic switch from the old motor and wired it in easily.
(5 out of 5 stars)
Reviewed By: brownj from York, ME ()
This company has provided us with quality parts for our pool pump over the years with consistently good prices and quick, reliable service to meet out needs. We always start with Inyo when looking for what we need. The website is easy to use and helpful by suggesting other parts that we may need as well when replacing the motor or other major part.