Part # B852
Warranty 1 Year
Manufacturer Code B2852
Dimensions 12" L x 8" W x 6.5" D
Alternate Part #'s 0-193984-25, 10-177214-24, 1103645400, 168451, 16858, 177214, 17721400, 177842, 177970, 1863580J, 187331, 193266, 193984, 196232, 196237, 196248, 54002, 5KC36MN2533BX, 5KC36MN2533X, 7-177214-24, 7-186236-20, 7-193266-20, 717721424, 8-177214-24, 8-177970-20, 8-193266-20, 90106915, A0104800, A100DL, A100DLL, B2852, B691, C1244, C48J2EC105, EB852, F56AA36A01, P716, SQ107U, SQD75UP1, USQ1072, V54002
Century and Magnetek replacement motors for your swimming pool pumps. INYOpools.com is one the largest pool pump replacement motor retailers in the world. Our replacement pool motors are made to all of the top manufacturers specifications. We stock thousands of motors which are designed to work on pool and spa pumps from manufactures like: Sta-Rite, Pac Fab, Hayward, Purex, American Products, Jandy, Jacuzzi, and more. If you need assistance choosing the proper replacement motor for your pump then feel free to Call us at 1-877-372-6038 and we will find the correct motor for you. Call 1-877-372-6038 for expert advice.
do i need a start capacitor to run this motor for pool
Could you please tell me if the B852 is the same thing as the B2852. Also, could you tell me if you have the shaft seal kit to. The only difference I see is the Code J and the serial number.
We have a an automatic pool cover since 2004. Seems the motor went out to close and open the cover. The motor is
AC Gear Motor
909 IN. LBS.
Please tell me which motor will replace this motor. With so many motors to choose from and to find the exact specs has proven to be a difficult task. Please advise.
Hi, Madeline. Unfortunately, we do not have a replacement for that motor.
Can you tell me which replacement motor I need? Do I just remove the old and bolts on the new?
I’m not positive on what motor I need as I keep finding small differences in each one I look at. I hope you can help because it’s far too loud right now to relax at the pool. I have this picture (best I could do as the label is so worn.
need a replacement for 3/4 HP pool pump motor MOD#: C48AB44A01. Which one do you sell that is a suitable replacement?
Hi. I was not able to find a suitable replacement in our database using the MOD# provided. Please provide a picture of the motor label and or the pump it is operating.
My friend has a 2008 Pentair whisperflow 3/4 Horsepower pump wfe-3 which is having noises from the motor. From the specs, this ao smith motor seems to be the correct replacement alternative to the pentair. Could you please confirm? Also, which gasket kit would be appropriate. Thanks for your advice
Are these normally hot to the touch? Just installed mine an hour ago and it feels very hot.
Yes, these motors run at approximately 140 degrees. If it exceeds normal operating temperature the thermal overload load will cause it to shut down.
Ok great! thank you for the quick reply, I really appreciate that
This motor appears to be an appropriate replacement for the one on my Jacuzzi pump that services the waterfall feature of my pool. The only difference is that mine does not have the small housing on the top of the motor. I assume this is a capacitor? Will I need a special tool to separate the pump from the motor?
Yes, the hump on the motor is the capacitor housing, going by your pictures; it should not interfere with your install. There is no need for extra tools, following the instruction in this guide and you shouldn't have a problem: How To Replace the Motor on Your Pool Pump.
Which motor do I need to replace my old sta rite dyna glas 3/4 hp motor?
Hello - the 3/4 HP Square Flange 48Y Full Rate EE Motor - QC1072 is the replacement motor for your K48K2PA105C1.
I have a WF-23 motor . It over heated from bad bearing. Half the bolts on one side are brittle and broke with minimal torque. I wish to purchase a replacement motor. I saw th AO smith .75 motor as the alternative to the pentair. What other parts would I need with it to replace the motor and assembly like the impeller etc.
what is the correct replacement motor for a Pentair WF 23 3/4 hp, 1.27 service factor. The part number on the motor is 75232. Another number on the motor looks like 86236-20.
I need a replacement motor for a 6 year old Spa-Rite 3/4 HP Super Max motor Part # 355371S what is the best quality motor to get that is easily replaced
Is this the correct replacement motor for a whisperflo model WF-23. Do you recommend replacing the shaft seal if I replace the motor even though the current seal is less than a month old? Thanks! Bill
Will this motor replace a Pac-Fab Challenger 3/4 HP 355338?
Hi, Paige. I was able to confirm that this motor will replace the following Challenger Motors, 35-5384 or 355019S. The motor will have a Century p/n that we can use to locate the correct motor.
Need a replacement motor for centurion switchless motor, this motor is old and I only have some info the rest has disappeared, pool and spa duty, hp3/4, type cs, time cont, code j, encl dp, sp 1.25, amps sf5.4/10.8, serial bu3-21, insul class b, hz 60.ph1.
Can you please help me? I think this is the replacement but want to be sure.
Do you have anything for corrosion prevention for the motor. Living on the Gulf of Mexico, the salt even corrodes glass!
Unfortunately, there is nothing we carry to prevent corrosion on the motor. I would recommend a Protective Pool Motor Cover - R221016 to keep the elements off of your motor as much as possible as well as not allowing runoff rainwater from the roof to fall directly on it.
What motor do I need to replace an AO Smith 7-177449-03 3/4 HP. It goes on a Whisper Flo WFE-3 pump.
Hello Carl, it looks like from what your numbers match to is a 3/4 HP Motor EE - Full Rate (B661, B2661) and pump seal Tune Up Kit Pentair/Purex Whisperflo - GOKIT32. Unless you have saltwater then Saltwater Tune Up Kit Pentair/Purex Whisperflo - GOKIT32SALT.
How many capacitors does the AO Smith 3\4 hp B852, B2852 have? Know about the run capacitor on top, but is there a start capacitor in the back of the motor under the electrical cover also? Got a humming, non starting pump motor to repair, any help appreciated. Thanks.
Hi Bob, The B852 motor only has a run capacitor and no start switch. The only thing could be the motor windings.
My old pool label reads A.O.Smith CAT serial CA04-08 Part 7-186236-20 Type CX FR:P56Y, HP---, SF---, PH 1, HZ 60, RPM 3450, Volts 230/115, AMPS 5.4/10.8, Time: CONT, ENCL: DP, FORM: KJM, CODE: N, AMB: 40. It seems like this pump will replace my old one but I wanted to make sure before I purchased this.
Yes that is a correct motor replacement for your current model.
will this fit a challenger pump
Hi, The A.O. Smith 3/4 HP, 56Y Frame, Up-Rate Motor (B852, B2852) will fit a Pentair Challenger Pump. You would also need to confirm that this motor is ok to use with your current Impeller.
How do we remove old pump. Removed all 4 bolts but pump won't disconnect from pool housing.
Our Video and Step by Step Guide on How to Replace a Pool Motor goes over this pretty well. Take a look at this video and let us know if you still need help.
Why should I purchase a Tune Up Kit?
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Why do I need to purchase a new shaft seal?
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
What is Service Factor?
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 to 4 hrs
Screwdriver, Socket Set, Wrench Set
Gave inyopools.com all of the info off of the old motor and they sent me the perfect replacement. They also sent me an email with a video link on how to properly replace the motor. With the video and a little help from my neighbor the replacement process was a breeze.
(5 out of 5 stars) Pool Filter Motor
Reviewed By: DreamBigGoGreen from Bowie, Maryland ()
Pros: Customer service, shipping time, price and product
Cons: None that I can think of
Best of all is the wonderful customer service help provided by Inyopools. The product was here in the time specified and the price was considerably less than the 5 other companies I checked with first. The product was as specified and ordered and hasn't given me any problems to date. It was installed about a month ago.
(5 out of 5 stars) Quiet pump
Reviewed By: ()
My old pump motor started making a loud noise. Inyo advised my that it needed replacing. The instructions on their website were very easy to follow. I did have to figure out some new ground connections. The new pump is more efficient and quieter.
(5 out of 5 stars) Great motor, simple to install
Reviewed By: Jawad S. from Houston, TX ()
Ordered this motor as a replacement to an old burned out motor. Very simple to install. INYOPOOLS.COM had it delivered just over 24 hours after I ordered it. Quite and hopefully will last a long time!
(5 out of 5 stars) Replacing motor
Reviewed By: filbert from 53558 ()
Pros: Easy to replace
I purchased a motor to replace my old one, not being sure I could handle the project. With all of the support I received both on the product information and chat help, I was able to replace my motor and move on to enjoying my pool. Inyopools is now my source for all I need for my pool.
(5 out of 5 stars) Quality Pump
Reviewed By: David M. from New Orleans, LA ()
Pros: Ease of ordering and speedy delivery.
First time attempting this process. I found INYOpools on a web search as they had the best price for a replacement pump. The pump I was replacing, came with my in ground pool pump system, Wet End, Impeller, etc... As I stated before, this was my first time attempting such a job. When I opened the box I immediately discovered a higher quality pump; identical model and frame number to the failed pump. Attached all components, completed wiring to power, and started pump - it worked! Pump is running quietly and pool is being filtered again. Speedy delivery by INYOpools. I highly recommend shopping with INYOpools.
(5 out of 5 stars) Swimming pool pump motor
Reviewed By: Patrick S. from Mississippi ()
Pros: Appears to be better quality motor than original
Customer service guided me to the exact match of my existing pump motor. Install was a breeze. The motor is alot quieter than the original. Very pleased with service and delivery
(4 out of 5 stars) /Pool pumpn motor
Reviewed By: Barbara H. from Port St. Lucie ,Florida ()
Pros: Do it yourself
I have purchase several items from this company and have not been disappointed yet.The product is working fine . the price was reasonable,and when I called for costumer service I recieved it.Not knowing how to replace my pool parts the direction made it easy.