$404.99

Qty:

By Pentair Pool Products


Details

Top

Model # 360040

Alternate Part #'s KPY-20-600, PEN360040

Product Description

New! Introducing the Newly Designed Kreepy Krauly Cleaner, a New Modern Design Enhanced by Rugged Construction and Ultra Reliable Service Life.

Classic PERFORMANCE REDESIGNED
It's been redesigned for greater cleaning coverage from the water line to the pool bottom. But it still gives you all the simplicity and reliability that over three million owners have trusted for decades. Kreepy Krauly cleaner's powerful suction relentlessly removes dirt and debris automatically. And with only one operational moving part, you can count on years and years of dependable service, and an exceedingly low cost of operation.

FEATURES

  • Redesigned for greater cleaning coverage from water line to pool bottom.
  • Powerful suction makes removal of both large and small debris a cinch.
  • No wheels, gears, or diaphragms to continually replace or repair.
  • Regulator valve automatically adjusts water flow to set the ideal speed for maximum cleaning performance.
  • No expensive, energy draining booster pump to buy, saving you significantly on your utility bills.
  • Installs in minutes, with no tools required.

 

Product Specifications

Surface Type:
Gunite & Plaster
Hose Size:
40'
Manufacturer:
Pentair
Pool Type:
In Ground
Cleaner Type:
Suction
Pool Surface:
Concrete
Pool Size:
Up to 40' Long
Top

?     Asked on 8/22/2017by Stan

Is the body of model #360040 and #360042 identical? Can I use either model to go from vinyl to plaster lined pools by just changing from a pleated seal to a flat seal? Thanks
 Reply

A  Answered on 9/7/2017 by InyoPools Product Specialist Lennox H.

Hi, Stan. The body on both units are the same just the seal is different. 
 Reply


?     Asked on 5/30/2018by germantown tn

My gunite pool was painted with a epoxy paint that is very slick. I have had trouble w/my pool barracuda suction it has completely stopped working. It is over 10 yrs old. Will this model adhere to the slick surface of the epoxy paint or will I have the same problem? It is an odd shaped pool, in the shape of a molar-yep a tooth!. It slopes in a crazy s curve where the steps walking in to the pool water is about 3' deep for 3 ' then it slopes down immediately to 5 then straight down to 12. thanks!
 Reply

A  Answered on 5/30/2018 by InyoPools Product Specialist Lennox H.

Hi. For a painted slick surface, I would recommend the Kreepy Krauly Pool Cleaner for Vinyl & Fiberglass Pools (Pleated Seal) - 360042 model. We made need additional accessories like weight, hoses etc based on where you vac line is located. 
 Reply


?     Asked on 12/28/2018by cappac

Which seal should I use for a "Pebble-Tec" pool?
 Reply

A  Answered on 1/3/2019 by InyoPools Product Specialist Joe S.

Good day, for a Pebble Tech, or Pebble Sheen interior you would use the Kreepy Krauly Pool Cleaner for Gunite & Plaster Pools Only (Flat Seal) 360040.
 Reply


?     Asked on 4/13/2019by Helen

Are the flat seal and a pleated seal for a Kreepy interchangeable - can't find the seal for this
 Reply

A  Answered on 4/14/2019 by InyoPools Product Specialist Lennox H.

Hi, Helen. The seals are interchangeable. Replacement parts which include the Flat Seal - Blue - 370478Z are listed on the Kreepy Krauly - 2013 Model Part Diagram page.  
 Reply


Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)