PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
Model # 78864200
Alternate Part #'s 56-102-1007, AMP-30-4200, PEN78864200
The AquaLumin ® II Lights nicheless lights provide brilliant, double contact halogen quartz lighting for all vinyl liner pools and spas. This revolutionary, patented design uses a mounting hub and bracket instead of a niche. This light eliminates the need for prepunched light panels, costly
make-up panels and extra braces for vinyl pools.
Product Features:
I have an AquLumin II Light will the AquaLumin III light work as a replacement?
Reply
Yes the AquaLumin III light is a direct replacement for the AquaLumin II light. However if you have the AquaLumin or AquaLumin I then you would require this retro fit kit in conjunction with the AquaLumin III light >http://www.inyopools.com/Products/07501352024766.htm
Reply
I just purchased two of the Aqualimn III (120V/250 Watt) lights from your website. I was wondering if these lights can be used with a dimmer relay. I have an Aqua Plus pool panel and it has the ability to utilize a dimmer kit to accommodate dimming the lights. See page 24 of the following link "Lights Relay". https://www.hayward-pool.com/pdf/manuals/Manual236.pdf
I understand that some lights (such as fluorescents) should not be controlled by a dimmer so I am wondering if there are any dimmi
Reply
We spoke with the manufacture of the light and they stated that they do not recommend using the dimmer relay on the AquaLumin III light as a dimmer will shorten the life of any bulb. They also stated the halogen bulbs are more fragile then incandescent bulbs and that the life would be shortened even quicker on the halogen. With all of this being said they stated you could use the dimmer relay, but we wanted you to be aware of these potential issues. The dimmer relay for the aqua plus can be purchased here http://www.inyopools.com/Products/02200004034490.htm
Reply
I just received my Aqualumin III lights and it appears that the mounting brackets do not come with the lights. It does not appear that the light comes with everything for new installation in a vinyl pool with steel walls. Any insight you can provide is appreciated.
Reply
If you are replacing an Aqualumin light then you would require this Aqualumin retrofit kit http://www.inyopools.com/Products/07501352024766.htm If this is new construction or a new light installation then you would require either of the items here http://www.inyopools.com/SearchResults.aspx?KeyWords=78887 The 1" and 3/4" on these items is referring to the conduit size which the light cord goes through.
Reply
Does the Pentair Aqualumin III model 78864200 come with the mounting bracket.
Reply
I have a nicheless type 51087 part#78863000 thru 78864311 will the aqualumin 3 nichelesspool pool light fit on my mounting bracket
Reply
Gerald, I cannont determine if the 78863000 thru 78864311 is the Aqualumin, Aqualumin I or Aqualumin II. This AquaLumin III light is a direct replacement for the AquaLumin II light. However if you have the AquaLumin or AquaLumin I then you would require this retro fit kit in conjunction with the AquaLumin III light http://www.inyopools.com/Products/07501352024766.htm
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Electricians pliers, wire stripping pliers.
1 0
The AL III was easy to install as a direct replacement. Fits the original AL II mounting bracket perfectly. This is easy if you have basic electrical wiring skills. Make sure the power is shut off before starting! Remove the old light from the pool as if you were going to change the bulb and cut the wire off near the old light fixture. Strip the end of the old wire, connect to the new cord and tape the whole thing so it will not come apart. Take the cover off the junction box and disconnect the wiring. Use the old wire to pull the wire from the new light through the conduit. Make sure you leave enough wire in the pool end to wrap inside the light so you can remove the light from the pool for future lamp changes. Also leave enough wire in the box to work with, at least 6", before you cut the new wire off. Reconnect the wiring as before and close up the box.
The Most Helpful Review
1 0
(5 out of 5 stars) I love this light
Reviewed By: Kim M. from South Sioux City, NE. ()
Pros: Lights up entire pool
Cons: can't think of any
My last light (AquaLumin II) lasted 20 years. This was a direct bolt on replacement.It took less than 20 minutes to install and it performs perfectly.Light showed up in three working days. :)
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Exact replacement for older Aqua Lumin II.
Reviewed By: Inyo Customer ()
Exact replacement for old Aqua Lumin II. Fits existing AL II mounting bracket. Easy to install if you have basic electrical wiring skills.
Was this review helpful to you?
(5 out of 5 stars) AquaLumin light
Reviewed By: Rodney B. from Clifton Forge VA. ()
use as replacment for AquaLumin II,works great easy to install
Was this review helpful to you?