Part # 5002-07
Manufacturer Code 355320
Dimensions 12" L x 12" W x 1" D
Alternate Part #'s 10120, 354629, 355320, 40217, 40218, 788379658779, PAC-101-3147, PAC-101-3202, PAC1013202, 35-110-1634, PEN355320
Clamp Band Assembly for Pentair Challenger, Intelliflo VSF, and Waterfall pumps.
Frequently Bought with Clamp Assembly
Housing Gasket 5002-14 (for Challenger and Waterfall models)
I have s Pac Fab Challenger 1 1/5 Hp pump which needs a new clamp band assembly and o-ring. The housing has part number p/n 35-5459 on a label attached to it. I have also attached a photo of the pump. Can you tell me the part numbers of the Clamp Band Assembly and o-ring seal I need to order?
I have to replace a clamp band of our pool pump and it's a R.G. Ray # 10120
Do you have ?? Se attached the picture ,
Hi Marcio, Yes this band clamp is the proper replacement for the R.G. Ray # 10120
Is this band a replacement/compatible to replace Band Clamp #354629? I did a search for that part number and your website brought me to this item.
I have a clamp for pool filter marked rg ray 10120. Do you have something that would replace this clamp? I'm having a hard time finding it.
Can you please send a picture of the entire filter? Or do you know the make/model of the filter?
Hi We have leak in the impeller housing. We need to replace housing alone. We are having a hard time finding the housing for ours. The band number is 35462 9 or 0 we cant read it well, we think 9. Help Please
I have a Dura glas pump - mod# P4E6E-151L. It is leaking at the bottom of the plenum. I have replaced the outer seal and tightened the outer clamp - but it still leaks. there are no cracks in the housing. I am thinking that the clamp (20 yrs. old) may not be doing the job. your thoughts and recommendations would be appreciated. Thanks
Hi Rick, yes if your pump is a P4E6E-151L and is leaking at the clamp and you have already replaced the o-ring then yes I would replace the clamp. The correct clamp you will need is this P4E6E-151L Replacement Clamp as the 5002-07 clamp is not the correct clamp for your pump.
I have a pentair pump i need the clamp for the lower/smaller filter. I know the clear lid to the filter is part # P08080 i hope this will help. The part no on the clamp is QL17d9 but can not find this part no. Thanks
Will this fit model number MA-100?
The correct band assembly, Band Assembly, Complete (313196), is no longer available. Unfortunately, we do not have dimensional information or an alternative part listing for the obsolete band to compare to the one you submitted a question on. Feel free to contact the manufacturer @ 1-800-831-7133 if you need additional assistance.
the band clamp is leaking when i start pump. is there one way band clamp fits on pump or is there a specific way to put on.
Roland- If you band clamp is leaking make sure you have the knob at the 12 O'clock position on the pump. If you already have it like that, I would check the housing gasket or the pump seal (depending on where it is leaking from). The housing gasket is a part # 5002-14, the shaft seal is part # 354545S, or you could get them both in a kit which is part # GOKIT5.