Top Mount Valve Flange 1-1/2" FPT (OEM) - SP0714T

$126.99

IN STOCK
FREE SHIPPING

Part # 4802-01C

By Hayward Pool Products

  5 Average  

Details

Top

Part # 4802-01C

Manufacturer Code SP0714T

Dimensions 9" L x 8" W x 15" D

Alternate Part #'s 5535100 SEA, HAY06221, sp-711-13, SP0714T, sp71113, SP714T

Product Description

 

This item is the Hayward Original SP0714T backwash valve commonly used on the following Hayward Pro Series Sand Filters S166T, S180T, S210T, S220T and S244T. We also carry the After Market PureLine Valve which is a direct replacement for the Hayward SP0714T valve but at a more economical price. Click on the advertisement below for the After Market PureLine Valve option.

 

 

Top

?     Asked on 9/14/2019 by

is this the part I need to replace I changed the sand but when I vacuum all the dirt goes back into the pool ?
 Reply

A  Answered on 9/14/2019 by InyoPools Product Specialist Lennox H.

Hi. The valve could be the cause if the diverter gasket is bad. You can tell if the diverter gasket is bad if water is leaking out of the backwash port while in filtration mode. If that's not happening the valve is not the issue and it could be another issue. 
 Reply


?     Asked on 7/22/2019 by RAY LIZURA

what are top settings
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Hector F.

If you view the valve label part number SPX0714G you can see all of the settings. 
 Reply


?     Asked on 7/11/2019 by Julian Kane

Do you ship to Mexico. And if you do - how much
 Reply

A  Answered on 7/11/2019 by InyoPools Product Specialist Lennox H.

Hi, Julian. Yes, we can ship this valve to Mexico. In order to get you a quote, we will need the shipping address.
 Reply


?     Asked on 7/9/2019 by KEITH THOMAS CLARKE

IS THE SP0714T A REPLACEMENT FOR A SPO714G11
 Reply

A  Answered on 7/9/2019 by InyoPools Product Specialist Lennox H.

Hi, Keith. Yes, you can use this SP0714T as a replacement
 Reply


?     Asked on 7/5/2019 by Lowell

Is this the correct replacement for model SP714-A?And, will the Purline one work for mine?

 Reply

A  Answered on 7/6/2019 by InyoPools Product Specialist Lennox H.

Hi, Lowell. This SP0714T (OEM) or the PL0714 (Pureline) valves are the correct replacement. 
 Reply


?     Asked on 6/22/2019 by

I have a haywood s230 filter will this one work
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Kevin G.

Yes, that will work for your S230T filter system.
 Reply


?     Asked on 6/10/2019 by brian

I have a hayward pro series high rate sand filter model s166t, the valve is a sp714 will this replace the one I have?
 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Patrick P.

Hi Brian, Yes this is the proper replacement valve for the Hayward pro series high rate sand filter model s166t. The valve listed on this page is the original valve made by Hayward. We also carry the valve made by PureLine which is also a direct drop-in replacement for your valve. The PureLine valve is $59 and can be viewed or purchased through this link PureLine Replacement Valve for Hayward SP0714T
 Reply


?     Asked on 5/28/2019 by Clint

I have a Hayward SP-711 Vari-Flo Valve. Will this replace it correctly?
 Reply

A  Answered on 5/28/2019 by InyoPools Product Specialist Patrick P.

Yes this does replace the SP-711 Vari-Flo Valve. We also carry the PL0714 Generic Valve at $59 which will also replace the SP711 Valve
 Reply


?     Asked on 5/24/2019 by Francisco Amelinckx

Does this replace the SP714 T1 model?

 Reply

A  Answered on 5/24/2019 by InyoPools Product Specialist Patrick P.

Yes, this is the replacement for the Hayward SP714 T1 model. We also carry the PureLine PL0714 After Market Valve for $59 which also is a direct replacement for the SP0714T
 Reply


?     Asked on 5/19/2019 by Darko

Kateri model zamenja SP 704 Lep pozdrav
 Reply

A  Answered on 5/20/2019 by InyoPools Product Specialist Michelle B.

Hello, Is there anything I can help you with today?
 Reply


?     Asked on 5/14/2019 by Mike

Does this replace the S166T model?
 Reply

A  Answered on 5/14/2019 by InyoPools Product Specialist Hector F.

Yes, this valve can be used on your model filter. 
 Reply


?     Asked on 4/29/2019 by Deb

does this replace sp0714g11m
 Reply

A  Answered on 4/30/2019 by InyoPools Product Specialist Patrick P.

Hi Deb, Yes this valve does replace the sp0714g11m we also carry the PureLine PL0714 Valve which is also a direct replacement for the sp0714g11m and the price on that valve is only $59 and the quality is just the same as this valve.
 Reply

  • Commented on 4/30/2019 by Product Owner

    Is this the whole part and not just the valve
     Reply

    • Commented on 4/30/2019 by InyoPools Product Specialist Patrick P.

      Deb, This is just the valve. Which other part are you needing? Feel free to post a photo if you like, simply click on the reply link to upload a photo.
       Reply


?     Asked on 1/24/2019 by

I need to replace #SP0714C—will this work.
 Reply

A  Answered on 1/29/2019 by InyoPools Product Specialist Michelle B.

Hello, Yes, this will be the proper replacement.
 Reply


?     Asked on 8/18/2018 by Len

I need a Vari-Flo Control Valve part#SP704 For modelS-144T. Will this replacement work? It also looks like there's another portal added.
 Reply

A  Answered on 8/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Len. Yes, this SP0714T valve is the correct replacement. The valve has 3 ports, Pump, Return, and Waste.
 Reply


?     Asked on 6/17/2018 by Tom Benczkowski

i need to replace a hayward vary flo valve model SP71113 seriel number 120b28 will the SP0714T work
 Reply

A  Answered on 6/18/2018 by InyoPools Product Specialist Alex V.

Tom, The SP0714T valve will replace the older SP71113. 
 Reply


?     Asked on 6/16/2018 by dayton

what model # s will link to my model#SP0714TX?
 Reply

A  Answered on 6/18/2018 by InyoPools Product Specialist Alex V.

Dayton, This will replace the SP0714TX. 
 Reply


?     Asked on 6/14/2018 by Shelley

I have an older model sand filter #S190TSCP Dream line. I need to replace the top mount valve assembly. Which one would I need to get? I cannot find one that lists my model#.
 Reply

A  Answered on 6/14/2018 by InyoPools Product Specialist Lennox H.

Hi, Shelley. This SP0714T OEM valve will fit the S190TSCP Dream Line filter. 
 Reply


?     Asked on 6/1/2018 by Byron M. Combs

I have a Hayward 166T sand filter and when I backwashed for the first time the water kept draining and drained down my pool. Would I need to replace the spider gasket or the entire multiport. Also my model number has worn off. What do you recommend
 Reply

A  Answered on 6/1/2018 by InyoPools Product Specialist Alex V.

Byron, This valve will fit the S166T. It sounds like you may need to inspect the spring. The spring can be difficult to replace so you may be better off replacing the entire valve. 
 Reply


?     Asked on 5/26/2018 by Debbie

We have a SP-711 TXC Hayward multiport Vari-Flow. We would like to replace it. Am I correct in thinking that I can replace it with SP0714T?
 Reply

A  Answered on 5/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Debbie. Yes, you can use this SP0714T as a replacement. 
 Reply


?     Asked on 5/22/2018 by Scott Morgan

do you sell just the spider gasket?
 Reply

A  Answered on 5/22/2018 by InyoPools Product Specialist Hector F.

Yes, but it would need to come with the key/seal assembly part number 4703-23
 Reply


?     Asked on 4/8/2018 by John DeGoede

The valve still is working but is hard to move. Consequence was that the handle broke. Do you have that only?
 Reply

A  Answered on 4/9/2018 by InyoPools Product Specialist Hector F.

Typically in your case, it is the spider gasket that needs to be replaced and of course, you would need to replace the handle to repair this issue. You can see these parts listed as keys 1 and 9 listed on the parts diagram here. You may also want to consider replacing that entire top valve assembly being key 4.  
 Reply


?     Asked on 7/26/2017 by dave goodwin

I have an Hayward diverters sp714A. I can not find a gasket for replacement.
 Reply

A  Answered on 7/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Dave. The SP0714T valve replacement gasket is not sold separately, you'll have to purchase the Diffuser w/ Gasket - SPX0714CA
 Reply


?     Asked on 7/6/2017 by John

We have a Hayward S-180T series. It is leaking water out the backwash hose and putting sand back into the pool. Do I need a new 6 position multiport valve or what is causing this?
 Reply

A  Answered on 7/9/2017 by InyoPools Product Specialist Lennox H.

Hi, John. You can either replace the Top Valve Assy - SPX0714BA and Cover O-ring - SPX0714L or the entire valve in order to resolve your issue. 
 Reply


?     Asked on 7/4/2017 by Patricia

Does this product come with all the parts needed?
 Reply

A  Answered on 7/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Patricia. This is the complete valve, pressure gauge, and o-ring. The clamp is not included. 
 Reply


?     Asked on 6/29/2017 by Don Ayers

I need a replacement for a SP 704 whole head valve 4 way,what do I need?
 Reply

A  Answered on 6/30/2017 by InyoPools Product Specialist Lennox H.

Hi, Don. The SP704 valve is no longer available and can be replaced with this SP0714T valve.
 Reply


?     Asked on 6/19/2017 by Shirl Mathis

does this valve replace sp-712
 Reply

A  Answered on 6/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Shirl. This valve will not replace an SP-712 Valve, you can use model # SP07121 or SP07122.
 Reply


?     Asked on 6/19/2017 by g

Looking to replace my hayward vari flo control assembly body. model sp-711-13. I see the replacement is SP 0714 although the ports for pump and return are not aligned the same as on my sp 711-13. My lines are pvc pipe and sp 0714 ports will align with my existing lines. Is there a solution?
 Reply

A  Answered on 7/23/2017 by InyoPools Product Specialist Alex V.

G, Unfortunately, you will have to re plumb. The newer valve ports are off centered to allow for easier installation. 
 Reply


?     Asked on 6/14/2017 by Bob

I have a model s244t sand filter ,is the sp714t the proper replacement for variflow sp714t xl ?
 Reply

A  Answered on 6/15/2017 by InyoPools Product Specialist Patrick P.

Yes the SP0714T is the proper replacement valve for the Hayward S244T sand filter.
 Reply


?     Asked on 6/10/2017 by David

will this valve replace the SP714T1?
 Reply

A  Answered on 6/10/2017 by InyoPools Product Specialist Lennox H.

Hi, David. Yes, this Hayward SP0714T valve will replace the SP714T1 valve.
 Reply


?     Asked on 6/2/2017 by Jason

Water leaks a little bit but always out the back where you backwash in just about every position. Do you know why?
 Reply

A  Answered on 6/3/2017 by InyoPools Product Specialist Patrick P.

Jason, this is an indication that you need to replace this Diverter W/ Spider Gasket
 Reply


?     Asked on 6/2/2017 by

Water is coming out the top of our filter, especially after we backwash!we replaced the spider ring
 Reply

A  Answered on 6/8/2017 by InyoPools Product Specialist Lennox H.

Hi. You may have to replace the Tank O-ring if water is leaking from between the tank and the filter valve. Water leaking from the valve after changing the diverter gasket would lead to a bad cover o-ring or valve stem o-ring.
 Reply


?     Asked on 6/1/2017 by joseph scopelliti

will this fit a s180t tank
 Reply

A  Answered on 6/1/2017 by InyoPools Product Specialist Hector F.

Yes, this valve will work with that filter model.
 Reply


?     Asked on 5/31/2017 by gary higbee

will this valve work on s220t sand filter
 Reply

A  Answered on 5/31/2017 by InyoPools Product Specialist Lennox H.

Hi, Gary. Yes, this valve will fit the Hayward S220T filter.
 Reply


?     Asked on 5/28/2017 by Donald Trail

I have a Hayward e200 series sand filter. Will your SP0714t valve fit that filter base.
 Reply

A  Answered on 5/28/2017 by InyoPools Product Specialist Hector F.

Yes, this valve will work on the E200 model sand filter.
 Reply


?     Asked on 5/23/2017 by Chuck K.

The model number is not on the valve where it should be. It might have been erased by the sun. The valve body has "SP714A" I need a replacement. Is the SPX714T the right one.
 Reply

A  Answered on 5/23/2017 by InyoPools Product Specialist Patrick P.

Hi Chuck, Yes this SP0714T valve is the correct replacement for your SP714A valve.
 Reply


?     Asked on 5/17/2017 by

where is model # located?
 Reply

A  Answered on 5/18/2017 by InyoPools Product Specialist Lennox H.

Hi. It is located on the same label where the positions are.
 Reply


?     Asked on 5/15/2017 by Lawrence Davidson

I have a problem what is the clear tube between the pump and the valve assembly called.
 Reply

A  Answered on 5/18/2017 by InyoPools Product Specialist Lennox H.

Hi, Lawrence. It is called the Clear Tube Union Elbow - SPX1485B6 which is used on some Hayward side mount sand filters.
 Reply


?     Asked on 4/23/2017 by Scott

I have a broken hayward SP714 for 2" pipe sand filter. Which topmount will replace this? And, how do you change this?
 Reply

A  Answered on 4/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Scott. The Hayward SP0714T filter only has 1-1/2" ports. If the filter you have has 2" ports you will need p/n SP071621. Instructions can be found in our How To Replace the O-Ring on a Pool Sand Filter.
 Reply


?     Asked on 1/21/2017 by Dominique

I need a replacement for a valve gasket SP704-C, can you assist?
 Reply

A  Answered on 1/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Dominique. The Valve Key Gasket - SPX0704D will fit your model valve. You can also view all the available parts via the Hayward Multiport 4 Position 1 1/2" Vari-Flo Model SP704 Parts page.
 Reply


?     Asked on 8/7/2016 by

Hi, the body of my SP711 13TE is broken, what is the replacement and are the connections identical?
 Reply

A  Answered on 8/12/2016 by InyoPools Product Specialist Lennox H.

Hi, The SP0714T valve is the replacement for the SP711 Series valve and the connections will be the same.
 Reply


?     Asked on 7/16/2016 by Valerie

missing the top lever diagram on my filter system. can you email me the diagram. Hayword E-100L serial # 21120904001164007
 Reply

A  Answered on 7/20/2016 by InyoPools Product Specialist Alan M.

Here is a link to the Hayward E-Series Top Mount Sand E-100 Parts diagram. I believe you are looking for the replacement Top Mount Valve, SP0714T.
 Reply


?     Asked on 6/25/2016 by Bob

I have a Hayward Swim Pro Filter Model number SP-711SW what new model would replace it. I looked at SP071T would this model works?
 Reply

A  Answered on 6/25/2016 by InyoPools Product Specialist Patrick P.

Hi Bob, Yes the Hayward SP071T Valve would be the proper replacement for your SP-711SW valve.
 Reply


?     Asked on 6/14/2016 by dan

What model replaces the model SP 711 Hayward Vari-Flo valve or can I still get it?
 Reply

A  Answered on 6/15/2016 by InyoPools Product Specialist Matt S.

What is your valve's full model number? The SP711 should be followed by a "13" or a few letters. Or you can provide a the filter's model number.
 Reply


?     Asked on 6/11/2016 by angelo

will the SP0714T replace the SP-704SW ? Just want to check before buying thanks
 Reply

A  Answered on 6/11/2016 by InyoPools Product Specialist Patrick P.

Hi Angelo, yes the SP0714T will replace the SP-704SW valve.
 Reply


?     Asked on 6/6/2016 by Laure

Does the muli port valve sp0714talso come with the spider gasket?
 Reply

A  Answered on 6/7/2016 by InyoPools Product Specialist Patrick P.

Hi Laure, Yes the spider gasket is included with the SP0714T valve.
 Reply


?     Asked on 6/3/2016 by

handel broke at top of filter can i buy.
 Reply

A  Answered on 6/9/2016 by InyoPools Product Specialist Lennox H.

Hi, The Handle (SPX0710XF) is the replacement handle for this valve.
 Reply


?     Asked on 3/5/2016 by Dick Reed

Can the clamp that holds the valve to the tank be purchased by its self or do you have to purchased the entire unit? The one on the tank broke where it screwed together.
 Reply

A  Answered on 3/7/2016 by InyoPools Product Specialist Lennox H.

Hi Dick, The Clamp can be purchased separately. If you can provide us with the manufacture and model of the tank that the valve connects to I can locate the correct clamp assembly.
 Reply


?     Asked on 5/30/2015 by

Can only the interior of this be obtained and how much will it cost
 Reply

A  Answered on 5/31/2015 by InyoPools Product Specialist Patrick P.

Yes we do carry the Internal Assembly of the Hayward SP0714T Valve here.
 Reply


?     Asked on 5/23/2015 by

I typed in the old part no wrong. - does this replace SW-704 (I think I put SP-704 originally)
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

Yes this valve would be a replacement for both the SW-704 and the SP-704.
 Reply


?     Asked on 5/23/2015 by gale

Is this easy to replace and what is your return policy?
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Alex V.

Gale, The valve is easy to replace. You simply have to remove the plumbing and loosen the clamp. Please be sure to release the pressure in the tank befor removing the valve. You can return the in new/unused condition within 30 days. Please call us if you need to return the valve.
 Reply


?     Asked on 5/23/2015 by

Does this replace the SWIM PRO SP704 valve? Does it come with the o ring and pressure gauge?
 Reply

A  Answered on 5/23/2015 by InyoPools Product Specialist Alex V.

Hello, Yes, the SP0714T replaces the SP704T valve. The SP0714T comes with the pressure gauge and tank o-ring.
 Reply


?     Asked on 5/12/2015 by gary

Does this spo714t fit the model s-244t sand filter and replace the sp-711-20 flow valve thank you
 Reply

A  Answered on 5/12/2015 by InyoPools Product Specialist Patrick P.

Gary, If you current valve is on top of your filter and has 1-1/2" pipe coming into it then this would be the correct valve for the Hayward S-244T sand filter.
 Reply


?     Asked on 3/28/2015 by Lisa

Does the o ring and pressure gauge come with the control valve assembly?
 Reply

A  Answered on 3/30/2015 by InyoPools Product Specialist Robert M.

Hello Lisa - The pressure gauge and o-ring are included with the SP0714T valve.
 Reply


?     Asked on 5/2/2013 by Guest

I am replacing a Hayward SP0704 valve with the SP0714T, will all the ports be in the same location?
 Reply

A  Answered on 5/2/2013 by InyoPools Product Specialist Patrick P.

The ports on the SP0714T are positioned differently than the ones on the SP0704 valve so will have to move the locations of the hoses.
 Reply


?     Asked on 4/18/2013 by Guest

Is part number 4802-01C the correct replacement for the Hayward SP711 valve?
 Reply

A  Answered on 4/18/2013 by InyoPools Product Specialist Patrick P.

Yes, part number 4802-01C is the correct replacement for the Hayward SP711 valve.
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Socket Set, Saw

Had a leak due to a crack in the housing. New piece fit perfectly

Written on 12/12/2017 by Guest

Drained my filter, cut my return, intake, and backwash lines. Loosened the clamp on top of my filter, removed the valve, washed out my filter, put in new sand, replaced the valve, reconnected my lines and everything back to normal.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, battery nut driver

Losing water.

Written on 9/20/2017 by Guest

Wife thought the pool had a leak, Kept on losing water.The gasket was shot n the valve..Unfortunately you can't just get the gasket . I replaced the valve in about 10 minutes and it solve the leak got the right part promptly and at a fair price.INYOPOOLS is a lot cheaper than the local pool company Right part , right price....

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
9 Rating
5 star:
 
(9)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews